ReviewsTriumph Cobalt Steel 1bit Set

Drill America DWD115J-CO-SET 115 Piece m35 Cobalt Drill Bit Set 1/16 -1/2 A-Z #1-#60 DWDCO Series

Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel....
Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
Round shanks allow use with a wide variety of toolholding systems.
When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
115 piece drill bit set comes in a metal case.

Check Stock

1/8 Inch Cobalt Drill Bits(10Pcs), HPHOPE M35 HSS Metal Twist Drill Bits Set, Jobber Drill Bits Length and Straight Shank, Suitable for Drilling in Hard Metal, Stainless Steel, Cast Iron

【M35 COBALT HIGH SPEED STEEL】1/8" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses.
【135° SPLIT POINT】135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank of this cobalt steel drill bit allows for firmly holding and accurate centering and makes drilling precise and faster.
【FULLY GROUND PROCESS】Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance.
【PROFESSIONAL & WIDELY USE】Jobber drill bits perfectly Suitable for drilling holes as Stainless Steel, Copper, Cast Iron, Galvanized Pipe, Aluminum Alloy, Wood and Other Softer Metals. Not for Glass or Ceramic Materials.
【EASY USE & STORAGE】This metal twist drill bits set includes 10pcs 1/8" Cobalt Drill Bits, This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and DIY, household maintenance and repair.

Check Stock

Viking Drill and Tool by Norseman 69280 Type 240-D 135 Degree Split Point Cobalt Jobber Gold Finish Drill Set (115 Piece)

115 pc Set High Speed Steel M42 Cobalt NAS 907J 135-Degree Split Point.
135-Degree split point for accurate centering and fast penetration.
Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance.

Check Stock

Hymnorq 13PC Metric M35 Grade Cobalt Steel Twist Drill Bits – Metal Index Organizer Case and Straight Shank – 1.5mm to 6.5mm – Ideal for Drilling Cast Iron, Stainless Steel and Other Hard Materials

COBALT STEEL – Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit..
135°SPLIT POINT – the 135°quick-cut split point are self-centering and able to penetrate metals quickly with less pressure, prevent bits from “walking and wanding”. Easy cutting without need of center punch..
FOR METALWORKING – Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
13PC METRIC SET – The set includes 13pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm. Well organized in a metal indexed storage case for easy transport to your worksite..
DOWNLOADABLE USER GUIDE – We’ve summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would ge....

Check Stock

MACXCOIP Cobalt Drill Bit Set, 29Pcs M35 High Speed Steel Bits for Hardened Metals, Stainless Steel, Cast Iron and Wooden Plastics, with Metal Index Storage Box, 1/16"-1/2"

[Various Sizes] 29 sets of drill bits include 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64“, 3/8", 25/64", 13/32", 27/64", 7/16, 29/64, 15/32", 31/64", 1/2", can meet more needs..
[M35 Cobalt Drill Bit] The M35 cobalt drill bit is a durable, sharp and robust drill bit suitable for cutting stainless steel, iron castings, copper, aluminum and other soft metals as well as plastics, wood etc..
[Quick and Efficient] The cobalt drill bit set can be used effectively on most soft and hard objects, with a 135 degree point tip and twist design for faster cutting, self-centering to prevent walk-off and faster chip and particle removal..
[HSS Drill Bit Set] HSS cobalt drill bit set for hardened steel with excellent cutting performance. 29 sets of drill bits for long term use. The inserts are hardened and polished for improved sharpness and precise cutting without wobbling..
[Easy Storage] The drill set includes drill holders with size indexes and is packaged in a small, strong package for easy storage and sorting. If you have any questions, please feel free to contact us and we will be happy to help you..

Check Stock

Hymnorq Jobber Twist Drill Bits 15pc Set, Fractionsh Inch Size 1/16 to 3/8 in Premium Index Case, M35 Cobalt Steel, 135 Degree Split Point, For Stainless Steel Iron and Other Metals

COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to create a hardened heat-resistant alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times compared with an average HSS drill bit..
SELF CENTERING - The 135°quick-cut split point is self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. (The 4 small bits are 118 degree chisel pointed..
15PC SET - The set includes 15pcs (12different sizes: 2 pieces of 1/16", 3/32",1/8" bits, and 1 piece of 5/64", 7/64", 9/64", 5/32", 3/16", 7/32", 14", 5/16" and 3/8" bit) of fractional inch size M35 grade cobalt steel twist drill bits, packed in a hard ABS plastic indexed case. Manufactured to German DIN338 standard..
METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..

Check Stock

JEFE HEX 115 PCS HSS Cobalt Drill Bit Set, Twist Jobber Drill Bits Set, 135-Degree Split Point, Fractional 1/16"-1/2", Letter A - Z, Wire #1 - #60 with Metal Indexed Storage Case

DRILL BITS SIZE: Jefe Hex 115 pcs set includes 29 pcs fractional sizes from 1/16" to 1/2" by 64ths increments.
60 pcs wire sizes from #1 to #60. Almost cover all sizes you would use..
COBALT JOBBER DRILL BITS:115 pcs high speed steel with 5% cobalt drill bit set can resist high heat abrasion while drilling. M35 cobalt HSS twist drill bits is more suitable for hardened working material. Particularly adapt to drilling stainless steel, cast iron, high temperature alloy, titanium alloy and even hard plastics, and woods. Can also be used for soft materials..
TWIST DRILL BITS: Premium HSS with 5% Cobalt and 135° split point drill tip design guarantee 115 pcs drill bit keeping sharpness while drilling hard materials and prevent tips walking on the working surface. Proper twist and flute design clears chips and particles fast..
WIDE APPLICATION: Jefe Hex 115 pcs set with sharp and hard cutting edge is ideal for versatile application especially for projects made from hard material, such as kitchen utensils, machine parts, medical equipment, DIY projects and so on..

Check Stock

amoolo 1/4\ Cobalt Drill Bit(10 Pcs), M35 HSS Metal Drill Bit Set for Hard Metal, Stainless Steel, Cast Iron

【10Pcs 1/4" Cobalt Drill Bits】10Pcs - 1/4”(Dia 6.35mm) x 2-3/4”(Flute Length 69.85mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization..
【M35 Cobalt High Speed Steel】Industry grade 6542 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..

Check Stock

Drill America – D/A833SD-CO-SET 33 Piece m42 Cobalt Reduced Shank Drill Bit Set (1/2″ – 1″ x 64ths), D/ACO Series

Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
performance is similar to uncoated tools.
Round shanks allow use with a wide variety of toolholding systems.
When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
33 piece drill bit set comes in a metal case.

Check Stock

Gustard R26 Discrete R2R DAC - R2R+1Bit XMOS DSD512 PCM768kHz LDAC Balanced K2 Clock Decoder with Remote Control(Sliver)

Dual architecture: Independent R2R 1Bit,support native PCM native DSD and DSD to PCM..
PCM NOS: Without any digital signal processing,bypassing the volume adjustment,raw PCM stream was decoded by the R2R array directly..
Native 1Bit DAC,support DSD 512 (via USB)and DSD 1024 (via IIS).The DSD stream decoded by the independent 1 bit convertor without DSD to PCM converting. *Volume is fixed under this mode..
Streamer/Renderer: Support roon,upnp and more protocols in the future..
Replace the input signal's clock with precision oscillators (local or external). Interference from the input source's clock is avoided..

Check Stock

Topec 49pcs Screw Extractor/Drill Bit Set, Professional Remove Set for Removing Broken Studs, Bolts, Socket Screws and Fittings

49-PIECE MULTIFUNCTIONAL SET- 13+1pcs nut remover set and 3/8"-1/4" hex adapter, 6pcs spiral screw extractors, 13pcs multi-spline screw extractors, and 16pcs left hand cobalt drill bits..
VARIOUS SPECIFICATIONS AND SIZES- The set contains four types of 49 models of parts including metric and imperial sizes such as: 13mm, 9/16", 5/8", 17mm, 11/16", 3/4". You can choose the suitable size according to the size of your fasteners to meet various job requirements..
HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel..
WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill t....

Check Stock