ReviewsTruck Air Brake Line Kit

CATUDIY Automotive Brake Bleeder Kit with Fluid Transfer Pump, Brake Fluid Oil Extractor for Cars Electric Brake System Bleeding Tools with Master Cylinder Adapter Pressure Adjustable 0.6~3bar 110V

  • ⛽【Professional & Widely Use】This brake fluid extractor automotive is used to empty and fill brake fluid in the cars' brake and clutch equipment, while effectively avoid generating air bubbles during the process thanks to its pulsating brake system. We offer a full line of master cylinder adapters with this equipment, available for all vehicles in European, US, and Asian.
  • ⛽【Secure & Reliable】The brake bleeding tools come with a pressure gauge for better observing the fluid exchange pressure value. Also, The oil change pump used to fill the brake fluid reservoir is of pressure monitoring, which will automatically switch itself if cannot build pressure or the pump pull in air. CATUDIY promises 3-year warranty for damage caused by non-human factors.
  • ⛽【Easy & Time-Saving】This brake pressure bleeder tool is very simple to use and can be operated by one person. There are 4 pumps that can change the brake oil in the meantime. Because of its built-in working pressure bleeder pump, you don’t need to connect extra break bleeder vacuum pump kit.
  • ⛽【2 Power Supply Modes】The brake bleeder kit one....
Check Stock

Wolo (MCHWK-2) Air Horn Wiring Kit

  • Makes installation of any direct drive air horn (no tank) easy, trouble free and professional, without any special tools.
  • The kit is designed to easily hook-up a direct drive air horn to the vehicles factory horn system.
  • Included in the kit is all that is required to install a direct drive air horn.
  • wire harness with quick connect plug for the relay, terminals, in-line fuse, plastic wire ties and easy to follow instructions in English / Spanish.
  • Ideal for any 12-volt car, motorcycle, truck, etc.
Check Stock

High Powered 8KW 72V Electric Car E-Car Brushless Gearless Conversion Kit New

  • Are you tired of your electric trailer brakes not working? Here is the SOLUTION!!.
  • This kit fits on Dexter & Lippert 10,000 lb General Duty Axles commonly found on Kauffman, Big Tex, PJ, Bwise, LoadMax, and other heavy duty trailers. NOTE: Will not work with Rockwell or AL-KO axles!!.
  • The kit includes (2) left-hand & (2) right-hand hydraulic brake assemblies, (1) Hydraulic brake actuator, and (1) tandem axle brake line kit. PLEASE SPECIFY IF YOU HAVE SPRING OR TORSION AXLES OTHERWISE OUR BRAKE LINE KIT OF CHOICE WILL BE INCLUDED!.
  • Brake size is 12-1/4" x 3-3/8" with a 7-bolt mounting plate.These components have passed the CSA Standard CAN3-D313-M85 For Trailer Running Gear. ISO/TS 16949:2002 certified..
  • Brake actuator is a Genuine Dexter product part # K71-650-00. 1,000 PSI..
Check Stock

TL TOOLEGIN DOT Brass Push to Connect Fittings 1/4" Air Brake Union Air Line Fittings Push in Fittings Brass Union Air Brake Repair Kit Contains Tube Push-in Tee Union Coupling Male NPT 90° Elbow

  • Unique Air Line Tubing Kit: The air brake fittings contains 2pcs 1/4” Unions, 2pcs 1/4’’ Tees, 2pcs 1/4” DOT Push-In × 1/4” MNPT, 2pcs 1/4” DOT Push-In × 1/8” MNPT 90° Elbow, 2pcs 1/4” DOT Push-In × 1/4” MNPT 90° Elbow..
  • High-quality Material: Our push in fittings are made of high quality brass CA360 CA377 , with corrosion resistance, high temperature ductility and low permeability..
  • Technical Parameter: The Working Pressure is from Vacuum to 250 psi, the Working Temperature is from -40° F to +200° F..
  • Easy to install: All fittings can be sealed by pushing the tube firmly into the fittings, and they are also simple to be removed from the tube..
  • Wildly Usage: The air brake union assortment kit can be used with air systems, copper tubing in air brake systems, which is perfect for garages, workshops and so on..
Check Stock

CMTOOL Brake Spring Tool for Semi Trucks, 5081 S-Cam Air Brake Spring Tools Replace Brake Shoes, Heavy Duty Tractors and Semi Trailers Brake Spring Tool, Steel Construction Truck Air Brake Tools

  • 1.【Brake Spring Tool for Safely Replacing Brake Shoes】This s-cam air brake spring tool is a better alternative to a vise grip, pry bar or screwdriver, and is used to safely replace brake shoes on heavy-duty tractors, trailers and semi-trucks..
  • 2.【Time-Saving and Efficient Truck Air Brake Tools】There are some pliers similar to car brake spring calipers, but in most cases, you can't use them in close proximity to the brake chambers or suspension. The semi brake spring tool does not have this problem, and it will not take up too much space in your toolbox..
  • 3.【Wear-Resistant and Corrosion-Resistant Semi Brake Tool】The heavy-duty semi brake spring tool is made of high-quality hard steel material, which has excellent performance of anti-wear and corrosion resistance and is durable..
  • 4.【Easy-to-use Air Brake Spring Removal Tool】No additional tools such as vices and screwdrivers are needed. Just hook the fixed spring ring and press down on the shaft. The semi trailer brake tools only take a few seconds to easily remove and install the shoe spring..
  • 5.【S Cam Brake Tool with "V" Structure】The semi truck tools with a "V"-shaped structure at the end makes full use of the principle of leverage. The Lever action on the axle makes the job easier. L....
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

KOOTANS 15Ft 3 in 1 ABS 7 Way Electrical Cable and Rubber Air Line Hose Wrap Assembly with Aluminum Service Emergency Glad Hands and Extension Handles for Semi Truck Trailer Tractor

  • ...rate to -65F (-55℃), ABS power line (green) rated to -85F (-65℃), Emergency air line rated to -65F (-55℃). Fully enclosed in spiral wrap to prevent lines from becoming tangled. And it is more wear-resistant..
  • THE EXTENSION HANDLE: Installed between glad hands and air brake lines. It is easy to install. Provides added leverage for coupling/uncoupling gladhands without damaging the hose ends and fittings. Rugged anodized aluminum is more durable and corrosion resistant than cheaper plastic models. Diamond knurled textured exterior for improved friction..
  • GLADHAND HANDSHAKE KIT: Constructed of die cast aluminum with stainless steel wear plates. Service and Emergency configurations (polarized) or Universal (non-polarized). Meets SAE J318 requirements. Color coded red & blue Gladhand for ease of emergency and service line identification..
  • SPRING JOINT: more durable, joint is not easy to damage. BRASS CONNECTOR: good anti-corrosive and anti-rust properties. ELECTRIC CABLE USE HIGH QUALITY COPPER, good heat and electricity conduction, safe and efficient..
Check Stock

25 Ft. 3/16 OD Copper Nickel Brake Line Tubing Coil and Fitting Kit, 25 Ft of 3/16' x 25'

  • Complete Brake Line Tubing Kit- Includes 1 Pcs 25 Feet 3/16" Copper Nickel Brake Line(0.028" Wall Thickness) & 16 Fittings(10 x 3/16” (3/8-24) Inverted Tube Nuts, 2 x 3/16” (7/16-24) Inverted Tube Nuts, 2 x 3/16” (1/2-20) Inverted Tube Nuts, 2 x 3/16” (9/16-18) Inverted Tube Nuts).
  • High Quality- This brake line coil is made from Copper-Nickel alloy. It is malleable, easy to bend and not easy to break. Designed by 0.028" wall thickness and anti-rust, more flexible and durable for use..
  • Widespread Application- 3/16 brake line tubing kit for use in fuel and transmission systems. It is also widely suitable for household, industrial and commercial uses..
  • Rust and Corrosion Proof- Our copper-nickel fuel tube line last longer than standard steel tubing. It won't rust, corrosion resistance..
  • Warranty- Our brake line meets all SAE and ISO specifications. For any reason you're not completely satisfied, please feel free to contact us and ask for a replacement or refund..
Check Stock

OEMTOOLS 27311 Power Steering and Brake Bleed Adapter Kit Works w/Hand Vacuum Bleeder Brake Line Bleeder Kit w/ 2 Rubber Power-Steering Adapters

  • POWER STEERING BLEEDER: Power steering adapter kit works on most vehicles.
  • Meant to be used with a hand vacuum brake bleeder.
  • ACCESSIBLE BRAKE BLEEDER KIT: Not just a power steering bleeder.
  • Select one of 3 different sized brake bleed adapters for your caliper, hook up the....
  • REMOVE AIR FROM LINES: Remove trapped air with this power steering and brake bleeder adapter kit.
  • Check that your vehicle’s power steering reservoir....
  • HAND VACUUM PUMP READY: Couple the power steering fluid tool and brake system bleeding tools with a hand vacuum pump to effectively bleed air without....
  • DURABLE TIGHT FITTING COMPONENTS: This power steering vacuum adapter kit comes with 2 EPDM tapered rubber adapters and 3 rubber brake bleeder....
Check Stock

Yonligonju 2 in 1 Handheld Vacuum Pump Brake Bleeder Kit for Motorcycle 16 pcs Brake System Bleeding Tools with Gauge Adapters Automotive Brake Fluid Bleeding Set for Bike Car Truck (Red)

  • Multifunction: The brake breeder kit equips with vacuum gauge, help you read data accurately.Pressure range: 0-30 in Hg, 0-760 mm Hg. It includes accessories for both brake bleeding and automotive diagnose. Vacuum pump kit can test and diagnose a wide variety of parts and common systems on your bike motorcycle truck pickup or any other vehicle..
  • Single operation: Our brake bleeder kit is suitable for sucking out waste oil and air, and guiding the new oil to fill all the system. The biggest advantage is that you can operate the bleeder by yourself without any assistant!.
  • Easy to Carry: The handheld carrying case is made of high quality material, durable and rugged enough. Perfect for both home and business applications and easy to transport and store..
  • Complete Accessories: The hand held vacuum pump kit includes hand pump with gauge, 4.5OZ reservoir jar, 4 transparent hoses, 8 adapters and portable case, meets all your needs..
  • 100% Satisfaction: We are responsible for every product. If you have any problems with our products or services, please contact us immediately and we will provide you with exceptional responses to your every concern..
Check Stock

Yonligonju 2 in 1 Handheld Vacuum Pump Brake Bleeder Kit for Motorcycle 16 pcs Brake System Bleeding Tools with Gauge Adapters Automotive Brake Fluid Bleeding Set for Bike Car Truck Blue

  • Multifunction: The brake breeder kit equips with vacuum gauge, help you read data accurately.Pressure range: 0-30 in Hg, 0-760 mm Hg. It includes accessories for both brake bleeding and automotive diagnose. Vacuum pump kit can test and diagnose a wide variety of parts and common systems on your bike motorcycle truck pickup or any other vehicle..
  • Single operation: Our brake bleeder kit is suitable for sucking out waste oil and air, and guiding the new oil to fill all the system. The biggest advantage is that you can operate the bleeder by yourself without any assistant!.
  • Easy to Carry: The handheld carrying case is made of high quality material, durable and rugged enough. Perfect for both home and business applications and easy to transport and store..
  • Complete Accessories: The hand held vacuum pump kit includes hand pump with gauge, 4.5OZ reservoir jar, 4 transparent hoses, 8 adapters and portable case, meets all your needs..
  • 100% Satisfaction: We are responsible for every product. If you have any problems with our products or services, please contact us immediately and we will provide you with exceptional responses to your every concern..
Check Stock