ReviewsTruck Bed Rail

extang Solid Fold 2.0 Hard Folding Truck Bed Tonneau Cover | 83895 | Fits 2020 - 2023 Jeep Gladiator (JT) w/o rail system

  • Fits 2020 - 2022 Jeep Gladiator (JT) w/o rail system 5' Bed (60").
  • ULTRA-TOUGH PANELS | Solid Fold 2.0 is a hard folding truck bed cover armed with lightweight, automotive grade polymer panels. Dent and scratch resistant, and takes UV rays like a champ. From cinder blocks to groceries, these panels can handle it all.
  • ARRIVES FULLY ASSEMBLED | The whole cover comes completely put together allowing for a quick and easy install. Tighten the two cab clamps to your truck bed, unfold the cover to the tailgate & pull down on the EZ-Lock tailgate clamps to lock in place.
  • ENHANCED SECURITY | Not only does this hard folding truck bed cover have ultra-tough panels to protect your cargo and your truck, Solid Fold 2.0 is dedicated to keeping water out of your truck bed with its revolutionary watertight seals.
  • EXTANG ENGINEERED | Engineering is at the heart of why we have the most complete offering of truck bed covers in North America. We are committed to bringing products to the market that will enhance the utility, convenience, and appearance of your truck.
Check Stock

Thule XSporter Pro Shift Truck Rack

  • Sliding racks* adjust to the length of the bed to carry different loads up to 600 pounds.
  • Thule TracRac Base Rails are required (sold separately), providing drill free installation and secure into the truck stake pockets.
  • Ideal rack height (18”) allows for easy truck bed access and sits below cab of truck for improved aerodynamics.
  • Compatible with retractable tonneau covers (see fit guide).
  • Theft resistant system locks rack to base rail (locking knobs included).
Check Stock

LOCOPOW Bed Rail Stake Pocket Covers for GMC Sierra and Chevy Silverado 2014-2018 1500 2500 3500 Stake Pocket Hole Plug Covers Accessories

  • 【Accessories】Compatible with 2014 2015 2016 2017 2018 gmc sierra pile pocket covers are perfect for bed rail covers that cover holes. Bed Rail Pocket Cover Fits 2014-2018 GMC Sierra 1500 Denali/SLE/SLT/AT4/Base/Elevation and Fits 2014-2018 Chevy Silverado 1500 2500HD 3500HD High Country/LT/LTZ/Work Truck but not High Desert Kit, Dual Rear Truck, Chevy Colorado/GMC Canyon, 2019 Silverado/Sierra.
  • 【Custom Design】Bed rail cover hole plugs are compatible with GMC Sierra/Chevy Silverado 1500/2500/2500HD/3500 2014-2018, make your car look more refined, and can better prevent mud and rain water from entering the pile holes. These caps fit perfectly and look factory. The uneven edge is where the pile pocket cover extends, allowing the bed rail cover to fit better in the original hole. It is also easier to disassemble if you need to use stake holes. Great bed cover for covering holes.
  • 【Easy to Install】Compatible with gmc sierra pile pocket cover 2014 2015 2016 2018 Super easy to install, compatible with Chevrolet silverado pile pocket cover 2014 2015 2016 2018 No tools required to install or modify. 2014 2015 2016 2018 sierra/silverado pile pocket covers solve the problem of exposed pile holes. Once in place, they look beautiful. Definitely bloc....
Check Stock

TruXedo TL - TonneauMate | 1117416 | TonneauMate Toolbox - Fits Most Full Size Trucks except Flareside Stepside or Composite Beds

  • EXPANDED STORAGE | This versatile storage box can be used as a mounted toolbox, cooler, or container. Its functional design allows for placement anywhere along the truck bed. The elevated mounting system allows for the use of the entire truck bed floor.
  • STRONG & SECURE | The durable construction of this storage box allows it to hold up to 200 lbs of cargo. A lock and key mechanism on top of the toolbox paired with a truck bed cover installed above it ensures that your valuables stay safe.
  • EASY CLAMP INSTALLATION | This truck bed box is compatible with most full-sized trucks. For most models, the box clamps to the bed’s side rails underneath your truck bed cover.
  • WE'VE GOT YOU COVERED | TonneauMate is backed by a 2-year, no hassle guarantee. We are committed to providing you the best service at all times. Simply call our team. All TruXedo products are proudly made in the USA with globally sourced materials.
  • A few truck beds require an additional clamp kit to install: 08-13 Ford F150 w/ Track System – 1117457. 07-13 GM Full Size w/ Track System – 1117457. 04-22 Nissan Titan w/ Track System – 1117460. 07-21 Toyota Tundra w/ Deck Rail System – 1117459.
Check Stock

Ram 1500 Stake Pocket Covers,Truck Rear Bed Rail Stake Pocket Cover Hole Plugs Compatible with Dodge Ram 2019 2020 2021(Set of 2)

  • PERFECT FIT: According to the original design of the OEM, make sure to match the truck rear stake pocket holes of the original model perfectly. Our Ram 1500 Stake Pocket Cover is special designed for Dodge Ram 2019 2020 2021. Please note,do not fit 2018 Ram and before.The Size is 2.36 *2.36 *2.75 inch(6*6*7cm).Please measure the size of stake pocket to confirm whether it compatible with your car hole size before purchasing..
  • HIGH QUALITY MATERIAL: the 2021 Ram stake pocket cover is made of high quality ABS plastic material, corrosion resistance, wearable and durable, not easy to damage and crack. The sturdy Ram rear bed rail stake pocket covers not only can protect the stake hole, but also give your truck a great custom look. Moreover, the stake pocket cover does not fade and crack. There are no color difference between the cover caps and the bed rail after installation..
  • 1 MINUTE INSTALLATION: Ram 1500 stake pockets covers installation will be extremely easy and convenient.First wash and clean the hole,then place the stake pocket cover over the stake pocket hole,snap it tightly to the hole by hand, no need any tools during whole installation. In addition,there is an uneven edge at the extend of stake pocket cover, which could make the bed rail cover b....
Check Stock

Torklift F2022 F3008 Pairs of Front and Rear Camper Tie Downs for Ford F-350 Super Duty

  • Fits: 2017 Ford F-250 F-350 F-450 Regular/Super/Super Crew Cab w/ 8ft Bed.
  • Dramatic improvement with vehicle handling and stability and is the safest way to haul a truck camper (Prevents vehicle sway and camper movement in....
  • Maintain the value of your truck and prevent rust and bed damage by avoiding drilling into your truck bed or bumper.
  • Fast, no-drill installations securing your truck camper to your truck.
  • It is required that no additional holes be drilled through the vehicle frame side rail horizontal flanges.
  • It is suggested that outrigger-type “L”....
Check Stock

Torklift F2016 R3503 Pairs of Front and Rear Camper Tie Downs for Ford F-250 F-350 F-450 Super Duty

  • Fits: 11-16 Ford F250/F350/F450 Super Duty w/ 8ft Factory Bed.
  • 2016 F250/F350 Super Crew Cab Super Duty w/ Factory 8ft Bed.
  • Dramatic improvement with vehicle handling and stability and is the safest way to haul a truck camper (Prevents vehicle sway and camper movement in....
  • Maintain the value of your truck and prevent rust and bed damage by avoiding drilling into your truck bed or bumper.
  • Fast, no-drill installations securing your truck camper to your truck.
  • It is required that no additional holes be drilled through the vehicle frame side rail horizontal flanges.
  • It is suggested that outrigger-type “L”....
Check Stock

Draw-Tite Reese Elite™ Series Fifth Wheel Gooseneck Hitch

  • Utilizes the same vehicle specific under-bed rail kit system as the Elite fifth wheel.
  • Above-Bed Gooseneck can be easily removed for unobstructed use of the truck bed.
  • Built-in chain bracket to accommodate safety chain and Weather resistant plastic covering provides protection from the elements and aesthetic appeal.
Check Stock

TMS 800LB Capacity Extendable Non-Drilling Pickup Rack Ladder Rack Lumber Utility 2 Bars with Mounting Clamps (Patent Pending) (27-3/4'')

  • Non-Drilling Truck Rack with mounting C Clamps (Set of 8) included. Mounting clamps are compatible with Toyota Tundra Tacoma Jeep rail systems..
  • Set of 2 heavy duty steel adjustable truck ladder rack. This multi-functional rack is designed to haul bigger and longer items that the average pick-up truck bed cannot fit. It is perfect for ladders, lumber, pipes, pool equipment and much more..
  • Max Height: 27 inches plus the height of your truck's bed. Different size available to meet your need. Find out which size fit your truck best by measuring the distance between the truck bed and roof before purchase..
  • Width: Adjustable for most pickup trucks (Adjustable width of 5 feet minimum to 7 feet maximum where rack attaches to track bed)..
  • New Hook Design makes it ideal end fitting for nearly any heavy-duty tie down job in which strength and security are priority..
Check Stock

Torklift C2219 C3212 Pairs of Front and Rear Camper Tie Downs for Chevrolet Silverado 2500 3500 GMC Sierra 2500 3500

  • Fits: 11-14 Chevrolet Silverado 2500/3500 Crew & Extended Cab w/ 8ft Bed.
  • Dramatic improvement with vehicle handling and stability and is the safest way to haul a truck camper (Prevents vehicle sway and camper movement in all directions).
  • Avoid bed and bumper damage by attaching to the strongest part of the truck: the frame.
  • Maintain the value of your truck and prevent rust and bed damage by avoiding drilling into your truck bed or bumper.
  • Provides safety, security and stability while on the road.
  • The only truck camper tie down that mounts using independent tie down points that bolt directly to the truck frame.
  • Fast, no-drill installations securing your truck camper to your truck.
  • Vehicle manufacturer recommends that all full-height slide-in camper bodies be directly attached to the vehicle frame structure.
  • Lockable with Tie Down Locks (NOT INCLUDED).
  • It is required that no additional holes be drilled through the vehicle frame side rail horizontal flanges.
  • It is suggested that outrigger-type “L” brackets be attached to the frame’s vertical web to which the camper body can be conveniently attached.
  • Only truck camper tie down system with a Legendary Lifetime Warranty.
Check Stock

UWS EC30131 72-Inch Heavy-Wall Aluminum Truck Side Tool Box RigidCore Lid

  • SIDE ACCESS. This side mount tool box offers additional storage and organization in your truck bed, securely and conveniently mounting onto the top of the truck bed rail.
  • RIGIDCORE LID. This side mount truck tool box is built for maximum lid strength and security with patented RigidCore technology. The lid is filled with a solid foam that maximizes structural integrity and helps prevent binding.
  • EXTRA-THICK ALUMINUM. UWS side tool boxes for pickup trucks are constructed with thicker aluminum compared to most aluminum tool boxes for superior strength. This side bed tool box features a one-piece tub made from welded 0.058-inch aluminum.
  • STAINLESS STEEL HANDLE. This truck side mount tool box is equipped with a lockable, stainless steel handle for dependable security and long-lasting operation in spite of the elements.
  • EASY TO INSTALL. UWS truck side tool boxes are available in several different sizes and styles to accommodate each unique truck and preference.
Check Stock