ReviewsTruck Brake Lights

CURT 56070 7-Foot Vehicle-Side Truck Bed 7-Pin Trailer Wiring Harness Extension, Select Chevrolet, Dodge, Ford, GMC, Nissan, Ram, Toyota , black

  • TRUCK BED EXTENSION. This trailer wiring harness is designed to be an extension of the existing tow wiring of your truck. It retains use of the rear 7-way RV blade socket, while adding an additional 7-way socket in the truck bed.
  • EASY TO INSTALL. No wire cutting! No splicing! This trailer wire extension plugs into existing factory wiring on your truck and has a 7-foot harness for flexible positioning in the truck bed (2-1/8-inch hole saw required for installation).
  • HEAVY-DUTY CONNECTOR. The 7-pin trailer wire extension can be used to connect trailer taillights, brake lights, reverse lights, turn signals, electric trailer brakes and an auxiliary power wire.
  • DURABLE CONSTRUCTION. For long-lasting use and a reliable connection, the housing of the 7-pin truck wiring socket is made from durable molded black plastic and has a spring-loaded dust cover to protect the connection points.
  • VEHICLE-SPECIFIC. This vehicle-trailer wiring extension harness is designed for select models of Chevrolet, Dodge, Ford, GMC, Nissan, Ram and Toyota vehicles, ensuring the easiest possible installation.
Check Stock

Partsam 4Pcs 4" Round Red LED Stop Turn Tail Lights Brake Trailer Lights 24LED, 4 Inch Round Led Trailer Tail Lights Red Flange Mount Waterproof for RV Trucks 12V DC

  • Package includes 4 Pieces 4 inch Round Led Stop Turn Tail Lights Flange Mount Red with 24 LED.
  • This Waterproof round led trailer lights 24 LED serves 3 functions as stop light, turn signal light and tail light.
  • Mounts on surface of trailer with built-in flange.
  • These round tail lights are Approx. 5.4 inch diameter flange ring and 4" inner diameter and 1.1" Thickness and require a 4.38" diameter hole(check detailed page 1).
  • IP65 waterproof light fixture and withstand the corrosion of sand, dust, dirt, rain, snow etc..
  • Easy to install: these 4 round led lights are HARDWIRED with 3 wires, Gray is the ground, red is the high brightness for stop light / turn light / brake lights and Green for low brightness as tail light / running light.
  • These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each LED Light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb.
  • Universal Fit: These round led tail l....
Check Stock

Partsam 8Pcs 4" Round Red LED Trailer Tail Light, 4 Inch Round Led Stop Turn Tail Lights Brake Brake Trailer Lights for RV Trucks, Rubber Grommets and 3-Prong Wire Pigtails Included

  • Package includes 8 Pieces 4 inch Round Led Stop Turn Tail Lights Red, Grommets and 3-prong wire pigtails are included for complete installation.
  • This Waterproof round led trailer lights 12 LED serves 3 functions as stop light, turn signal light and tail light.
  • Recessed mount with grommet and Pigtails.
  • These round tail lights are Approx. 5 inch diameter Grommet Ring and 4" inner diameter and 1 3/16" Thickness.
  • IP65 waterproof light fixture and effectively withstand the invasion and corrosion of sand, dust, dirt, rain, snow etc..
  • Easy to install: White is the ground, red is the high brightness for stop light / turn light / brake lights and Black for low brightness as tail light / running light.
  • These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each LED Light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb.
  • Universal Fit: These round led tail lights are compatible with almost All automobi....
Check Stock

CEC Industries 7219 Wire Terminal (10-Pack)

  • T1 shape Wire Terminal | C-2F filament | 12V | 0.06A | 0.72W.
  • OE (Original Equipment) Manufacturer with proven reliability.
  • CEC lighting products are DOT compliant and meet or exceed SAE standards.
  • Applications include: interior and exterior automotive lighting for turn signals, taillights, brake lights, cargo lights.
  • for passenger cars, light truck, commercial, off-highway, agriculture, industrial, marine, powersport vehicles.
Check Stock

ICBEAMER 2 pcs BAY15d 1034 1157 1158 1493 2057 2357 18 LED 5050 SMDs Chips Replace Halogen Light Bulbs [Color: Red]

  • Caution: Our item are universal and Amazon fitment is only for reference . Buyer need to verify bulbs type before purchase..
  • 100% brand new never use or install (ship via box and tracking number is included).
  • Package include: One pair (2pcs) & Fits:1157 1157A 1016 1034 1130 1152 1154 1158 1493 2057 2357 2396 2397 3496 7528 12499 12594 P21/5W etc.
  • High performance light, while bettering life expectancy..
  • Color: Red & Application:tail lights,brake lights,back up reverse lights ,dash lights,turn signal lights,turn/ side marker lights ,stop lights,indicator lights,cornor lights,parking side marker lights,etc for car,RV,trailer,camper,boat,truck etc.
Check Stock

Ailbiuko Semi Air Lines Kit, 15FT 3-in-1 Airline Hose for Truck ABS 7 Way Electrical Cable with Glad Hands Hex Gladhand Handles Grips for Tractor Trailer

  • ... 【7-WAY PLUG】- SAE J560 for Plug. Use the industry-standard zinc die-cast plug to efficiently transmit power from the engine to your trailer/truck. 7 Way electrical cable uses real high-quality copper so it has good thermal conductivity and electrical conductivity, ensuring the normal use of lights such as turn signals and brake lights during driving..
  • 【SPRING JOINT】- More durable, joint is not easy to damage. Brass connector: good anti-corrosive and anti-rust properties. .
  • 【GLADHAND HANDSHAKE KIT】- Constructed of die cast aluminum with stainless steel wear plates, the port thread is machined by high-precision CNC machine, ensuring a good sealing performance under strong pressure. The heavy duty gladhand handles are thick enough to provide greater grip and are easier to install with the glad hand coupler. .
Check Stock

LINKITOM Trailer Lights Welded Mount Steel Boxes Kit w/6 inch LED Oval Tail Lights & 2 inch LED Red Round Side Lights w/ Grommet wire connectors 2 Pack

  • Trailer Light Kit: includes 2 X Welded Mount Heavy Duty Steel Boxes, 2 X 6" Oval Red LED Trailer Lights w/ Rubber Grommets and wire connector.
  • 2 X 2" Round Red LED lights w/ Rubber Grommets.
  • Steel Trailer Light Boxes: Made by 14 gauge heavy duty steel, protect the LED tailer light effectively. The steel box housing is design of excellent moisture-proof sealed and IP 67 waterproof makes it be definitely waterproof..
  • Super Bright: Led Trailer Lights has bright LED diodes with super high visibility, light up the rear or side of your vehicle or trailer in daylight, midnight, raining or fog days. Improve the drive security and avoid accidents..
  • Brake& Turn Taillight: Function as tail lights, turn/brake lights and side marker light. Fit for heavy truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc.,.
  • Simple Installation: Led trailer lights with black rubber grommet are mounted on the box. wiring them for installation to the corresponding wire on trailer. And then weld on the light box to the trailer frame..
Check Stock

Nilight 2PCS 16Inch 11 LED Red Trailer Light Bar for Park Stop Turn signals Tail Brake Light DOT Compliant IP65 Waterproof Truck Trailer Marker ID Bar, 2 Years Warranty

  • High Visibility LEDs: Each oval led tail lights uses 24 high quality SMD LEDs to emit ultra-bright red light, offering two brightness levels. High for brake lights and low for Running Light. Individual diodes feature a circular pearl-like reflector for clearer light, improved visibility and a safer night for you..
  • Easy Installation: Standard 6" size. Black wire for Negative, White wire for Brake Light and Red wire for Tail/Running Light. Mark and drill holes according to the size of the base provided, and fix the trailer lighting with screws after connecting the wires. The mounting hole size is: 7” (175 mm) x 2.7” (68 mm).
  • Premium Material: This oval trailer lights is made of high-quality ABS shell and PC lens to ensure long-lasting durability. Compared with other household rubber installations, we use screws to install more sturdy, effectively protecting the entire led trailer tail lights. Anti-vibration and dust-proof not easy to fall off..
  • Waterproof & Durable: IP67 waterproof trailer tail light, capable to withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weather, provides long-term durability for your vehicles..
  • Multi Functional Trailer Light: 6 led trailer brake lights Suitable for most vehicles....
Check Stock

AUXMART Universal LED Trailer Tail Lights, 16 LED Smoked Stop Brake Turn Reverse Tail Lights Rear Combination for Jeep Wrangler YJ TJ CJ Truck Trailer Boat RV Flatbed, 12V

  • ...op turn signal light work with most 12V vhicles.
  • Unique black bezel color with smoked lens, give you the latest look and attitude. Suitable for Truck, Trailer, SUV, RV, Camper, Boat, Flatbed, Bus, Forklifts, Pickup, Coaches and Wrangler CJ YJ TJ, etc..
  • Ultra Bright LED --- 16 ultra bright LEDs, brighter than factory lights. Provides tail lights, brake lights, turn signals and reverse lighting functionality (No license plate light).
  • 12 red for brake/turn/tail functions, 4 white LEDs for revers functions..
  • Sealed & Waterproof --- 16 LED dual color trailer tail light is made of high quality ABS housing and PC lens, and completely sealed in epoxy to resist corrosion & moisture.
  • effectively withstand the invasion and corrosion of sand, dust, dirt, water and other impact of inclement weather..
  • Easy Installation --- 3 studs can be mounted directly on any flat surface. And it with 4-color coded wire connection for easy installation.
  • Black wire is ground, white wire is reverse light, red wire is brake light, brown wire is tail light..
  • You Will Get --- 2 x 12V 16 LED combination tail lights.
  • Professional installation is strongly recommended (Not including instructions, Please note that some modification or drilling is required for installation on Wranglers and Jee....
Check Stock

Traxxas Unlimited Desert Racer

  • Traxxas 85086-4 - Unlimited Desert Racer 4x4 SCT, LED Lights RTR, Fox.
  • Features: High-Voltage LED Lights Curved roof light bar (52 LEDs) Multifunction red and amber brake light/class light bar High-voltage 8-channel power....
  • Includes: (1) Unlimited Desert Racer 4WD Race Truck (1) Licensed Race Replica Painted Body (1) TQi 2.4GHz Radio System (1) 2200kV Motor (1) Velineon....
  • Specs: Length: 27.32” (694mm) Front track: 13.57” (345mm) Rear track: 13.57” (345mm) Ground clearance: 2.27” (58mm) Weight: 13.4lb (6.1kg)....
  • Part number(s) included (in factory packaging): 85086-4.
Check Stock

Partsam 30Pcs 3.8

  • 3. When you wire several lights together, you can wire them in parallel.
  • Light Size: 75mm x 20mm x 5mm (2.95″ x 0.8″ x 0.2″), Light Size with Black Base: 96mm x 20mm x 10mm (3.8″ x 0.8″ x 0.4″) and center to center distance: 3-5/16″ approx..
  • Partsam Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on.
  • As every truck lamp come with two wires, they can only use as one function a time.
  • free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
  • These lights don’t come with the on/off switch and Wire leads come out the back in the center so you must drill a hole in the mounting surface for them.
  • 5.These are Waterproof, not submersible. Please do not use it under water.
  • 2. These lights can not be set up to flash as strobes, of course, you can wire to a toggle (on/off) switch to make it come true.
Check Stock