ReviewsTruck Camper For Short Bed

2 Truck Upfitters 16' Gas Props (15.7' ext, 9.4' Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!

  • ... NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation..
  • Truck Upfitters Pair of 55 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys..
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed..
  • Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors ....
Check Stock

API Clamps (4 Pack) Silver Compatible with Toyota Tacoma - 2005 & Newer - Mounting Channel Track Truck Topper Cap, Camper Shell

  • ▊ 2″ throat Depth,Max Clamp Thickness 1 9/16″ thick,Clamp is 1.125″ wide.
  • ▊ No-drill installation – Place clamp around bed rail and truck topper – Tighten included carriage bolt.
  • ▊ Designed for mounting truck caps with fiberglass or aluminum rails,Fits multiple makes and models.
  • ▊ Designed For Mounting Truck Caps Or Covers With Fiberglass Or Aluminum Rails.
  • ▊ C-clamps help you secure a hard tonneau cover or camper shell to the side rails of your pickup truck bed.
Check Stock

Subaru Cargo Cover

  • 【Applicable situation】Do you want to install a tent on your pickup truck? Do you want to install a canopy on your camper van? Do you want to install the bracket on the truck? You need this product to make your transformation safer and stronger..
  • 【Compatible with】Mounting Clamps Truck Caps Camper compatible with CHEVY: Silverado / Sierra 1500, 2500, 3500. Silverado / Sierra 07 / Cargo Rail.
  • 【Replacement Mounting Clamps Truck Caps Camper】The product has a wide range of uses. It can be used to fix camping car shell, truck frame, car roof, flip cover and other objects that need to be fixed on the car.This set of 4 can be fixed in four directions to increase stability..
  • 【Quality】Truck topper clamps adopts C-clamp design, which is easy to install. It can be easily installed by tightening the screws with a wrench..
  • 【Lifetime Warranty】The Mounting Clamps Truck Caps Camper assembly from KASSEN comes complete with a lifetime warranty.If the mounting clamps truck caps camper ever fails on your car ,please contact us to solve the problem for you immediately..
Check Stock

Truck Upfitters LED 3rd Brake Light Replacement compatible with ARE, Leer, ATC, Astro, Jason & Century Camper Shells & Truck Caps. This camper shell brake light has 8 LEDs for maximum visibility!

  • Ultra Bright 8 LED brake light upgrade compatible with ARE, LEER, ATC, Astro, Jason, or Century Truck Camper Shells. NOT compatible with Snugtop. This camper shell light is a perfect upgrade / replacement for your truck cap brake light. Has more LED lights than most to ensure maximum visbility and redundancy..
  • MEASURE YOUR EXISTING BRAKE LIGHT TO ENSURE FIT. See pictures with dimensions to ensure this will fit your truck camper shell. Not all brake lights are the same!! This is NOT COMPATIBLE WITH ANY Snugtop parts. This will work as a replacement for most leer truck cap third brake lights, most ARE third brake lights, and most Century, Jason, and ATC brake lights..
  • Improved Design With Durability In Mind! Completely Sealed and Waterproof Circuit Board Ensures Maximum Life! DOT Compliant. Truck Upfitters designed this truck topper led brake light bar to work with various brands. Some include Leer camper shell parts / Leer truck caps, ARE camper shell / ARE topper parts, Century truck topper parts, ATC camper shell lights, and other camper shell brand truck brake lights..
  • Discreet Grey Lens for Cleaner Appearance. LEDs Light Up Solid Red..
  • Small Quick Connect 9mm Plug Fits Through Small Fiberglass Hole In Camper Shell.
Check Stock

WEIZE Truck Rack Aluminum Truck Bed Ladder Rack for Pick Up Trucks 800 lb Capacity

  • DURABLE - WEIZE truck rack is made of rust-resistant durable lightweight aluminum, which can easily hold up to 800 lb. for hauling ladders, pipes, tools, and recreational equipment..
  • DIMENSION - 70-1/8"L x 13-13/16" W x 34" H. The truck bed rack can extend up to 70 inches to fit most full-size and compact pickup trucks. 4 load stops are adjustable to firmly hold any size cargo and keep the rack ladder more steady..
  • EASY NO-DRILL INSTALLATION - 8 C-Clamps make the truck rack easily assembled and disassembled without drilling. Made from premium aluminum alloy, the C-Clamps are lighter and have higher compressive strength to firmly hold onto the pickup truck..
  • COMPATIBLE TRUCK TYPE - The truck ladder rack is for universal pickup trucks. Don't fit trucks with Utility Track System, Tool Box & Side Box, Cargo Management System, Truck Bed Cover, or Camper Shell..
  • WARRANTY - 1-Year Guarantee! If the mounting hardware components are missing or defective, please contact us for a free replacement. A satisfied solution will be given for ANY of your problems. Our support team is on standby for YOU..
Check Stock

Marilyn Hotchkiss' Ballroom Dancing & Charm School

  • ...m), Compressed Length B [in]: 11.8(300mm), Interchange number: 6939, 6939S10, C1608054, C16-08054.
  • measurement of the supported lid weight or of your old strut pressure is required to prevent purchasing wrongly!.
  • ✅ C16-08054 Gas Props 20inch -- Direct replacement struts for RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed mattress, queen bed, etc..
  • Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!.
  • ✅ ARANA C1608054 100 lb Lift Supports -- Customer will also use them on tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc.
  • Very Strong, do not buy them for the lid weight less than 80 pounds.
  • ✅100% Satisfaction Service -- 18 Months Support comes with every ARANA product.
  • If any questions before purchasing or dissatisfactions after purchasing or need installing/using guide, welcome to click "ASK SELLER" besides your order from ARANA for immediate assistance!.
Check Stock

StarONE Truck Flag Pole Mount Holder Fit for Toyota Tundra Tacoma Bed Rail System

  • SUPERIOR ILLUMINATION: MICTUNING 3pcs Crystal White 90-5050-SMD LED strip lights, total of 270 LEDs with high brightness. They light up the entire truck bed. Best for RV Awning Light, Truck Bed Light, Step Bar LED Lighting, Side Door Led Lamp, Pickup Bed Light Kit, etc.
  • PLENTY OF LENGTH: 60" LED strips each, rated 12V, long enough for cargo/pickup/camper/garage/RV Awning lighting, rear window, party household decoration. Features 2x 79ft of power wire, 1x 20ft of power wire, easily to connect. BONUS an extension cord included.
  • PROMOTE SAFE DRIVING: Comes with On-Off Switch and Blade Fuse, allow you to freely control the strips and ensure electricity safety in driving.
  • LONG LASTING: The LED truck bed lights are well made and sealed. IP67 sealed housing, protect LED strips against rain drops, snow, dirt and sand, super durable and flexible with up to 30,000 hrs lifespan.
  • QUICK INSTALLATION: The reliable adhesive tape can be simply peeled to stick on any smooth surface in seconds. Moreover, the extra ties help to keep your wires in order.
Check Stock

QPN Truck Bed Topper Clamp Truck Topper Clamps Mounting Clamps Truck Cap Clamps, Truck Bed Clamps and Canopy for Use On Ford Super Duty (4)

  • Designed For Mounting Truck Caps Or Covers With Fiberglass Or Aluminum Rails On Ford Super Duty Trucks.
  • C-clamps help you secure a hard tonneau cover or camper shell to the side rails of your pickup truck bed.
  • No-drill installation – Place clamp around bed rail and truck topper – Tighten included carriage bolt.
  • Added Clamping Length For Use On Ford Super Duty Pick-ups.
  • Durable, rustproof Aluminum construction.
Check Stock

Napier Sportz Vehicle Specific Compact Short Truck Bed Portable 2 Person Outdoor Camping Tent with Optional 4 x 4 Foot Sun Awning Blue

  • COMPACT SHORT TRUCK BED TENT: Camp out wherever your pickup can take you with this compact/short truck bed outdoor tent.
  • PERFECT FOR UP TO 2 PEOPLE: Spacious interior offers ample room for up to 2 adults to comfortably relax.
  • KEEPS PERSONAL ITEMS ORGANIZED: Internal gear loft, gear pocket, and lantern holder keeps your personal items neatly organized.
  • OFFERS OPTIMAL PROTECTION: Features full rainfly, storm flaps, and optional awning for increased privacy and protection from the elements.
  • FOR TRUCK BEDS UP TO 5.2 FEET LONG: Works with specific vehicle types with a compact or short truck bed measuring 5 to 5.2 feet long.
Check Stock

Fivepine 4Pcs Universal Truck Topper Clamp Camper Shell mounting Clamps Fit for Toyota Ford Dodge Chevy

  • 【widely Used】Mount your truck caps, pickup rack, truck bed cover, and camper shell brackets with the topper Clamps..
  • 【Anti-loose Design】The sturdy aluminum alloy structure ensures maximum strength, and the slotted jaws provide a firm grip..
  • 【Easy Installation】Solved the trouble of drilling. Just tighten the provided bracket bolts..
  • 【Universal design】Compatible with Chevy Silverado and Sierra 1500 2500 3500, Dodge Dakota and RAM 1500 2500 3500, Ford F150 F250, Mitsubishi Raider, Nissan Titan, and Toyota Tundra..
  • 【Perfect Size】Each truck bed shell clamp extends up to 5 inch tall and has a 1-1/2 inch opening space..
Check Stock

US Cargo Control Short Pickup Truck Bed Cargo Net with Cam Buckles and S-Hooks - Net Size: 66 Inches by 50 Inches with 6 Inch by 6 Inch Holes

  • DURABLE AND ADJUSTABLE - This short bed cargo net is made from industrial grade 2" black polyester webbing and includes 4 straps for adjustability. The maximum strap length is 48 inches for each strap. Typically works in most short bed trucks, but please measure to be sure it works for yours..
  • WORRY FREE TRAVELING - This truck bed netting keeps cargo in place on long or short distance trips to give you peace of mind! Each pick up cargo net is equipped with 4 Cam Buckles and 4 S-Hooks, The S-Hooks are vinyl coated so they will not scratch..
  • PERSONAL OR PROFESSIONAL USE - Whether it is your personal truck, or your work truck, this cargo net is tough enough to cover all your cargo! Tightening by hand allows the user's strength to determine the tension, which eliminates the risk of over tightening and damaging the net or your truck bed..
  • HEAVY DUTY AND BUILT TO LAST - At US Cargo Control we are committed to providing quality products that you can count on to get the job done right. With normal use, you can count on being able to use this heavy duty cargo net time and time again!.
  • SPECS - Net Size: 66" x 50" | Hole Size: 6" x 6" | Maximum Strap Length: 48" | Straps Attached To 66 x 50 Cargo Net with 5K D-Ring | Strap Hardware (each strap): 1 Cam Buckle, 1 Vin....
Check Stock