ReviewsTruck Tonneau Covers Nissan Frontier

Fixxpertise Soft Roll Up Truck Tonneau Cover Truck Bed Cover Fits 2005-2022 Nissan Frontier 5 Feet Bed ONLY for Models with Utili-Track System, Fleetside

  • 100% Full Bed Access:Longs 5FT, fits 2005-2022 Nissan Frontier 5 Feet Bed, Fleetside .Please note it fit ONLY for Models with Utili-Track System, DOES NOT fit for without utili-track system. Match your truck model perfectly and you can get the full bed access..
  • Easy Installation:Includes Roll-Up Tonneau Cover Assembly, 2 Side Rails, 6 Secure Clamps. In the majority of cases no drilling and further modification. Additional weather stripping and Installation manual included..
  • Heavy Duty Crossbars: With built-in 2 slightly bended crossbars that offer full support when the cover is lying flat,this ingenious design is to make the cover more smooth and more tense flat..
  • Superior Quality: Made with double layer PVC on the top, structured with solid alloy in the frame, 270° Velcro edges sealing with front latch lock system on truck bed. It is sturdy and provides flat and sleek outlook..
  • Save Gas: Truck bed cover help reduce wind resistance. We cover your bed..
Check Stock

ESI ROK BLOCK Tailgate Gap Cover 4.25\ width

  • The ORIGINAL Tailgate Gap Cover ROK BLOCK eliminates debris from falling into the tailgate gap area, greatly reducing clean-up time. Note: Use ROK BLOCK XL 7” width (search ASIN: B075PWVW67) for the following compatible pickups: Silverado, Sierra, Ford F150 2021 and newer with hinge retainer for power closing tailgate, Ford Ranger 2019 and newer, Nissan Frontier and all pickups / utes outside of the U.S. market..
  • When tailgate is closed ROK BLOCK doubles as a tailgate seal for the tailgate gap, preventing dust, fumes and water intrusion when using a truck cap or tonneau cover. To seal the sidewalls install patented Tailgate Seal with Taper Seal (sold separately, ASIN: B00IPQWXZQ)..
  • 3M ST1200 tape is a high-quality automotive grade tape that adheres to all surface finishes, including spray on bed liners. For drop in bed liners ROK BLOCK installs under the liner. Apply when the air and surface temperature is between 55° - 104°F (13° - 40°C)..
  • Excluded pickups, not compatible with: Honda Ridgeline with Dual Action Tailgate, RAM with Multifunction Tailgate and all pickups/utes outside the U.S. market..
Check Stock

BAK BAKFlip MX4 Hard Folding Truck Bed Tonneau Cover | 448506 | Fits 2005 - 2021 Nissan Frontier 4 11 Bed 58.6

  • Fits 2005 - 2021 Nissan Frontier 4' 11" Bed (58.6").
  • ULTIMATE SECURITY | The BAKFlip MX4 tonneau cover has durable aluminum panels that automatically latch as the cover is partially or fully closed, and is fully locked once your tailgate is closed.
  • STYLISH MATTE FINISH | Featuring matte-finished aluminum panels, protecting against marks, scratches and UV damage.
  • as well as premium upgrades to the perimeter seals and hardware.
  • 100% BED ACCESS | Operate this cover closed, folded or flipped up, all without covering the 3rd brake light. Paired with a dual action tailgate seal for tailgate operation open or closed.
  • WE’VE GOT YOUR BAK | The MX4 truck bed cover is rated up to 400 lbs of evenly distributed weight and is easy to install. This hard fold has a 5-year, hassle-free warranty, with a US-based support team.
Check Stock

KSCPRO Soft Tri Fold Truck Bed Tonneau Cover Fits 2005-2022 Nissan Frontier 5 Feet Bed, Fleetside (for Models w/or w/o Utili-Track System)

  • Perfect Fit: This soft tonneau cover Perfect Fits 2005-2022 Nissan Frontier with 5 feet bed Fleetside, for models with or without the utili-track system. When tailgate is locked, your truck bed is 100% secured. It makes your truck bed snow, rain, UV and dust-proof..
  • Sturdy: KSCPRO Tri-Fold bed cover has 3 built-in horizontal crossbars offering good support when fully unfolded the cover. Heavy-duty aluminum frame, industrial-strength vinyl and superior perimeter sealing protect your cargo in any weather condition..
  • Durable: It is composed of double layer vinyl which has been thoroughly tested for UV protection and superior tensile properties. Pre-assembled powder coated rails and aluminum clamps are included for trouble-free installation and formidable stability..
  • Easy Installation: All frames and clamps are pre-assembled. Just put it on truck, Clamp it, No Tools are required. In the majority of cases no drilling. You will have a smooth and simple installation by following the instruction paper inside box..
  • Warranty: Limited lifetime warranty! (Please measure your truck bed size or contact us before buying. While we do accept returns, the buyer may be responsible for the return shipping fee if ordered wrong.) Feel free to contact us directly..
Check Stock

ESI Ultimate Tailgate Seal Large with Taper Seal 6ft for The Sidewalls and/or Tailgate Gap of Various Pickups

  • ...: 2020 and newer Chevrolet Silverado 1500, 2500 and 3500, 2020 and newer GMC Sierra 1500, 2500 and 3500, Silverado with Multi-Flex Tailgate, Sierra with MultiPro Tailgate, 2015 and newer Chevrolet Colorado, 2015 and newer GMC Canyon, 2019 and newer Ford Ranger, Ford Lightning, Ford F150, F250, F350 and F450, Nissan Frontier, Nissan Titan, RAM with Multifunction Tailgate, RAM with RamBox, RAM with RamBox and Multifunction Tailgate..
  • Use on the horizontal tailgate gap for 3 pickups: Nissan Titan, Ford Ranger 2019 and newer (inside the U.S. market), Ford Ranger (outside the U.S. market). NOTE: To seal just the horizontal tailgate gap for most pickups worldwide, purchase a Standard Tailgate Seal with Taper Seal 6ft length (ASIN: B019QFCZ7A). To seal both the sidewalls and the tailgate gap for most pickups worldwide, purchase a Standard Tailgate Seal with Taper Seal 10ft length (ASIN: B00IPQWXZQ)..
  • Save time installing and get a complete seal by viewing detailed online photo instructions for most tailgate configurations. Online directions must be followed to properly install this product. Apply when the air and surface temperature is between 55° - 104°F (13° - 40°C). This product requires 25 lbs. of pressure to bond adhesive. MADE IN USA.
Check Stock

SHARCAR USA FRP Hard Tri-Fold Truck Bed Tonneau Cover | Fits 2005-2023 Nissan Frontier 5' Bed | 2009-2012 Suzuki Equator 5' Bed | Fit for Factory Utility Track System

  • Compatibility | the hard fold cover Fits 2005-2023 Nissan Frontier 5'/58.6"-59.5" & 2009-2012 Equator 5' / 58.6"-59.5". Will For Models With or Without Factory Utility Track System. NOT For Models With Cargo Bar System - need to remove for bed cover installation. Note: This cover place on the top of the truck bed rails, and the first panel near the cab can't stand up..
  • Sturdy Hardware | SHARCAR USA hard tonneau cover uses fiberglass reinforced plastic and aircraft-grade vinyl hardware to act as a strong protector of the truck bed and tailgate.
  • Multi-function | the hard folding cover provides a solid storage space for your cargo.
  • the anti-moisture, anti-impact, scratch resistant features allow the product to have resistance against weather exposure, chemicals and corrosion.
  • Easy Damage-free installation | the USA patented design is engineered for super easy installation. Thanks to the new style clamps, there is no need to drill holes.
  • Warranty | 3 year warranty against defects in hardware, materials and workmanship under its intended use (conditions apply).
Check Stock

Last Boks Mid Size Truck Bed, Cargo Box Organizer, Slides Out onto Your Tailgate for Easy Access to Load or Unload Your Cargo, Truck Accessories Stores and Protects Your Cargo and Your Truck

  • ...er is 52” wide x 23” deep x 11” high and weighs 17 lbs. LastBoks cargo box should never be used in an open truck bed. A tonneau cover or truck cap is required to operate safely..
  • FITS THESE TRUCKS - Last Boks mid-size fits the following trucks: Ford Ranger, Chevy Colorado, GMC Canyon, Toyota Tacoma, and Nissan Frontier. If you have GM bed liner that has storage behind wheel wells, use the midsize Last Boks..
  • 100% CUSTOMER SATISFACTION - We are completely dedicated to our high-quality products and flawless customer support. Should you have any questions or concerns please feel free to reach out..
Check Stock

UWS EC20501 Secure Lock 48-Inch Heavy-Wall Aluminum Under Tonneau Cover Tool Box, RigidCore Lid

  • TONNEAU-COMPATIBLE. This under tonneau cover tool box measures 16-1/2 inches high and has an offset lid to conveniently fit under most truck bed tonneau covers and maintain full functionality.
  • RIGIDCORE LID. This under tonneau tool box is built for maximum lid strength and security with patented RigidCore technology. The lid is filled with a solid foam that maximizes structural integrity and helps prevent binding.
  • EXTRA-THICK ALUMINUM. UWS aluminum truck tool boxes for under tonneau cover are constructed with thicker aluminum compared to most aluminum tool boxes to provide superior strength. This aluminum truck tool box features a one-piece tub.
  • SECURE LOCK HANDLES. This under tonneau cover tool box is equipped with easy-to-operate, dual-locking twist handles that can be locked on either side of the truck. The handles are wide-spread for easier access from the sides of the truck.
  • EASY TO INSTALL. UWS pickup truck tool boxes are available in several different sizes and styles to accommodate each unique truck and preference.
Check Stock

Black Horse Classic Roll Bar Compatible with 2000 to 2022 Nissan Ram Chevrolet Ford GMC Toyota Titan 3500 2500 Silverado F-150 Sierra 1500 2500 3500 Tundra XD Black RB001BK

  • ...d above the cab roofline and add heavy duty tie-down points along with the rugged styling to complement the off-road functionality and recreational activities.
  • Comes with Installation Instructions and Mounting Hardware.
  • Drilling on side tail lips of truck bed is required for installation.
  • Compatible with most tri-fold tonneau covers, tonneau brackets sold separately..
Check Stock

UWS EC20503 Secure Lock 48-Inch Matte Black Heavy-Wall Aluminum Under Tonneau Cover Tool Box, RigidCore Lid

  • TONNEAU-COMPATIBLE. This under tonneau cover tool box measures 16-1/2 inches high and has an offset lid to conveniently fit under most truck bed tonneau covers and maintain full functionality.
  • RIGIDCORE LID. This under tonneau tool box is built for maximum lid strength and security with patented RigidCore technology. The lid is filled with a solid foam that maximizes structural integrity and helps prevent binding.
  • EXTRA-THICK ALUMINUM. UWS aluminum truck tool boxes for under tonneau cover are constructed with thicker aluminum compared to most aluminum tool boxes to provide superior strength. This matte black truck tool box features a one-piece tub.
  • SECURE LOCK HANDLES. This under tonneau cover tool box is equipped with easy-to-operate, dual-locking twist handles that can be locked on either side of the truck. The handles are wide-spread for easier access from the sides of the truck.
  • EASY TO INSTALL. UWS pickup truck tool boxes are available in several different sizes and styles to accommodate each unique truck and preference.
Check Stock

2 Truck Upfitters 26.5" Gas Props for Snuglid SL & F2 Pickup Truck Shortbed Tonneau Covers (26.5" extended, 15.4" compressed, 80 lbs of pressure ea) MEASUREMENT REQUIRED! Incl 4 ball mounts and nuts!

  • CHECK YOUR LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL SNUGLID TONNEAU COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE!.
  • Truck Upfitters Pair (2 total) of 80 pound (each) gas struts. 26.5″ extended length and 15.4″ compressed length. Most commonly used for Snuglid/Snugtop brand (SL & F2 models) and Snuglid style Tonneau covers with 2 single lift assist arms. Fits other similar brand of fiberglass tonneau covers / truck lids, but measurement is required to ensure fit..
  • These do not fit all Snuglid fiberglass tonneau models (they do NOT fit ANY SL2 or RL models). Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement. Also check for 80 pounds of pressure, or 355N – 356N Newtons of pressure.
  • Comes with four threaded 13mm ball mounts and nuts for alternate ‘other than tonneau cover’ applications. Equivalent to Stabilus 202677 or Snuglid # 713119. Prime! Free Shipping! In Stock!.
  • Fits many (but not all) Snuglid SL and F2 Shortbed and Extrashort bed (5.5-6.5′) Truck Tonneau Covers with single lift arms (see picture). Check your original struts for part numbers:....
Check Stock