ReviewsTruss Plate Connector

MIECOO 17PCS Guitar Truss Rod Allen Wrench Set, Includes 7mm & 8mm Truss Rod Hex Box Wrenches and 4mm, 5mm, 6mm Lengthened Ball End Truss Rod Wrenches Repair Tool and Guitar Spanner Wrench

  • 【GUITAR REPAIR TOOL KIT INCLUDES】9 x Black Allen Wrench.
  • 2 x Black Ball End Truss Rod Wrench (4mm & 5mm).
  • 3 x Silver Lengthened Hex Wrench (4mm & 5mm & 6mm).
  • 2 x Silver Pocket Truss Rod Hex Box Wrench (7mm & 8mm).
  • 1 x Portable Storage Bag. Suitable for guitar, bass, mandolin, banjo and more. Perfect gift idea for guitar lovers, beginners, luthiers..
  • 【7MM & 8MM SILVER POCKET TRUSS ROD HEX BOX WRENCHES】made of high quality steel & durable. Fine workmanship, smooth surface with high glossiness. 7mm pocket truss rod hex box wrench fits for Taylor Guitar, and 8mm wrench fits for Gibson Guitar. Long handle length allows easier access to truss rod cavity and easily tighten or loosen the truss rod of your guitar..
  • 【3PCS SILVER LENGTHENED WRENCHES】set of 3 including different size: 4.0mm, 5.0mm, 6.0mm. Reach deep areas easily by using the ball end and apply higher force effortlessly by using the short end. Used to drive bolts and screws with a hexagonal head. Use for locking hexagonal screws, adjusting guitar neck truss rod efficiently, etc..
  • 【GUITAR MULTI SPANNER WRENCH】made of stainless steel & durable. Used to tighten or loosen most nuts or thumb wheels found on guitars, like output jack, control pot, pickup sw....
Check Stock

Cable Matters 2-Pack 2-Port TV Cable Wall Plate (Coax Wall Plate) in White

  • Coax wall plate provides a tidy way to connect a CATV box.
  • RG6 wall plate in white can be mounted with a standard-sized single gang low voltage mounting bracket.
  • 1 gang coax coupler wall plate provides pass-thru of video and data from an RG6 coaxial cable.
  • Replace a broken outlet or add an expansion location in the bedroom with this coaxial cable wall plate.
  • Coax wall jack has a standard F connector used by cable companies to connect a modem, router or CATV box for video and internet service.
  • Antenna wall plate connects a coax cable from an antenna with an F pin connector cable.
  • Cost effective 2-pack of dual coax faceplates organizes cables behind the wall instead of running them across the floor.
  • Install close to your router for a professional-looking installation.
  • Two-piece cable outlet cover with included faceplate and coax wall plate insert makes connecting the cables easier.
  • Simple installation ofcoaxial wall plate insert with the included mounting screws.
Check Stock

3x 5ft Lighting Triangle Bolted Truss 15 span Stand Universal DJ Metal 5 NEW

  • MEDIUM DUTY TRIANGLE TRUSS LIGHTING 15' span Adjustable span from 5' to 10' and 15 feet wide!.
  • set of (3x) 57" Triangle Bolted Truss. This medium duty triangle truss sections create nearly 15ft span..
  • You can mount up to 200 lbs evenly. Truss pipes are 1.5" in diameter. Truss sections are 10 inches in overall width..
  • You can create a 57" / 5FT span all the way up to a 171" 15Ft span.
  • This listing is just for 3x 5ft Trussing and stands are not included.
Check Stock

Light Truss Stand System by GRIFFIN | I-Beam Trussing Set & DJ Booth Platform Kit | Hanging Mount Lighting Package for Music Gear PA Speakers Can Lights | T-Bar Extension for Portable Audio Stage

  • ENHANCE YOUR PRESENTATIONS. A DJ STAND WITH STAGE TRUSS: An ideal stage lighting truss system to offer your performance's unique versatility, with this DJ equipment package with stage lighting stands. Whether you’re a traveling DJ, karaoke jockey, dance performer, rock band, or party host, this deluxe I-beam trussing stand system will help you raise your equipment into the air (up to 13 ft and 4 inches) and focus your lights or effects on the right area to make your presentations stand out!.
  • KEEP YOUR GEAR INTACT WITH 2 T BAR LIGHT STANDS: Accommodate any dj booth or dj system with this stage light truss dj package. With two sturdy T-bar tripod stands, a 15 ft I-Beam truss span, 56 different par can hanging points and 40 hanging bolts, this mobile trussing light stand will allow you to hang up to 8 DJ light par cans or speaker per T-bar stand and up to 40 in total. Sturdy, steel tubing, it can hold up to 200 pd.The ideal DJ lighting stand for your DJ light bar or stage equipment!.
  • EXTRA EXTENSION TRUSS PIECE FOR STAGE LIGHTS: Featuring an additional, third middle bar extension piece, this professional truss stand system offers you an incredible spread of 180 inches! The highly versatile design of the Griffin Lighting Truss Stand allows you to set it ....
Check Stock

GRIFFIN - Crank Up Triangle Light Truss System | DJ Booth Trussing Stand Kit for Light Cans & Speakers | Pro Audio Lighting Stage Platform Hardware Package | Portable Music Equipment Mount Gear Holder

  • KEEP YOUR STAGE GEAR SAFE. A DJ STAND WITH STAGE TRUSS: A DJ equipment package with stage lighting stands which is made of medium-duty steel with a sturdy, steel cable gear system that will easily lift your heavy light cans or PA speakers. Designed with rubber rest pads on the feet to provide sufficient support and stability. This is an extremely durable and long-lasting trussing system, perfect for all your stage lighting needs..
  • GIVE YOUR DJ STAGE LIGHTING RIG THE PLACE IT DESERVES: Accommodate any dj booth or dj system with this stage light truss dj package. Hoist your light cans up in the air with this crank up triangle truss stand! With two smooth crank mechanisms (one on each side) and three triangle truss spans, this lighting truss system can reach a total span of 177 inches wide, allowing you to hang up to 200 pounds of equipment. The ideal DJ lighting stand for your DJ light bar and stage equipment!.
  • ADJUST TO DIFFERENT HEIGHTS: Featuring two interlocking poles that allow you to adjust the height from 60" to 114" according to your needs, this trussing stand offers unmatched versatility and convenience. Included in the package you will also find 12 metal C-clamps (each rated to lift 44 pounds weight load), so you can mount your lights and other....
Check Stock

4040 Aluminum Extrusion Connector Bracket Set Included 8PCS Joint Plates,1Pcs M5 Wrench,40Pcs M8 T-Slot Nuts and 40Pcs M8x16mm Screws for 4040 Series Aluminum Profile 3D Printer Frame

  • 【What you will get?】Aluminum extrusion connector plate set included: 8Pcs X corner plate.
  • 【Size】120mm Length X 120mm Width, 40mm Length X 40mm Width joint plate with M8 holes. Please see the size pictures..
  • 【Material】Made of premium aluminum alloy material,high-strength anodized aluminum profile connector plate with better hardness and toughness..
  • 【Widely Application】Widely used in the fixation of 2020 aluminum profiles,not only use for professional 3d printer project,also apply for making DIY bookshelves, tables, kitchen brackets, furniture, shelf, equipment protection fence etc..
  • 【5 Stars Customer Services】Any problems about the our aluminum profile connector set ,our professional team will help you solve it soon when you contact us..
Check Stock

Jiayouy Pack of 2pcs 420mm Two Way Rod Type Guitar Truss Rod Steel with L- Wrench for Electric Acoustic Bass Guitars Neck Repair Adjustment Luthier Tool

  • Two way or two course guitar truss rod type..
  • Made of quality metal material, anti-deformation, sturdy, durable..
  • 2-Way Truss Rod is great for thinner necks that need a shallow truss rod depth..
Check Stock

GRIFFIN T Bar Adapters for Lighting Truss Stands 2 | Triangle or Square Trussing Bracket Mounts for Light Cans & DJ Booth Kit | Pro-Audio Effects Stage Hardware Holder | Music Equipment Gear Platform

  • RAISE YOUR TRUSSES & LIGHTS ABOVE YOUR AUDIENCE: With these T-adapters and your stands, you can get your lighting truss up high with confidence,....
  • LIFT YOUR HEAVIEST DJ SYSTEM EQUIPMENT WITH SAFETY: Accommodate any DJ booth or DJ system with this stage light truss DJ package. Boasting heavy-duty,....
  • ADJUST THE WIDTH OF EACH ADAPTER TO FIT ALL DIFFERENT SIZES OF TRUSSES: There’s no need to worry if this will fit your truss. These truss T-Adapters....
  • DJ TRUSS BRACKETS FITS ANY STANDARD TOP SUPPORT POLE 35MM TO 38MM: Fits any standard Top support pole: (35mm-38mm) or 1 3/8" Specifications:....
  • 1-YEAR WARRANTY – All products we sell from laptop stands, recording studio equipment, disc jockey accessories and dj stands, to stage equipment and....
Check Stock

Pop Up Canopy Tent 10x10, Heavy Duty Commercial Canopy Tent with Strong Truss Structure, Anti-UV Sun Instant Shelter for Flea Market, Parties, Garden, Backyard

  • ☀ Large Space - The canopy The 10 X 10 Ft space, A person up to 78 inches tall can stand under the canopy. It is perfectly suitable for commercial activities, parties and other big activities you want..
  • ☀ Full-Truss & Heavy-Duty - The heavy-duty canopy adopts a professional full-truss structure, thickened square legs and anti-rust coating, making the canopy heavier and more stable than others..
  • ☀ High-Quality Material - The Pop-up canopy is made of high-quality 300D polyester with a PU lining, which can withstand 99% of ultraviolet rays. And the heat-sealed seams provide good waterproofness, suitable for outdoor use..
  • ☀ Installation Tips - In order to make the tent more stable, please fill the sandbags during installation, fix them on the bottom of the main frame of the canopy tent, and fix the tent on the ground with nylon ropes and nails..
  • ☀ Recommendations - As the canopy can withstand limited water, the backlog of rain water can easily crush the canopy. In heavy rain and wind, to protect the service life of the tent, please fold the tent and store it indoors when necessary..
  • ☀ Easy to Carry - The sun shelter coming with a roller carrying bag, reinforced base plate and heavy-duty zipper and rubber handle. You can easily carry the canopy to ....
Check Stock

Frautron 5mm Guitar Allen Wrench, Guitar Truss Rod Wrench Tool for Martin Acoustic Guitar Truss Rod Adjustment, Deep or Narrow Truss Adjustment

  • 5mm lengthened guitar truss rod allen wrench, suitable for narrow or deep truss rod adjustments such as martin guitar. The added length really makes adjusting the truss rod easy..
  • Two way L-shape truss rod adjustment tool, easy to insert the sound hole and adjust the neck..
  • Made of carbon steel material, sturdy, durable and wear-resistant..
  • Overall Size : 125 x 75mm / 4.9" x 2.95"..
  • Suitable for most kinds of acoustic guitar, electric guitar and bass..
Check Stock

GK64 GK64x Keyboard kit CNC Wood Wooden Case Wired PCB Plate Stabilizers Walnut Wired PCB

  • Package Included: CNC Case + Feet + Screws + GK64x PCB + Plate + Plate stabilizers.
  • CNC Wood Case and the stabilizers is Genuine plate mounted stabilizers.
  • Built-in microphone under spacebar, support External sound source play.
  • The plate is FR4 plate which more soft and silent.You need to attach plate with PCB by switches.Install 4-5 switches to plate then to PCB socket at....
Check Stock