ReviewsTtl Logic

Painless Performance 80132 Single Pole, Double Throw Relay, 40 Amp

  • ★ The 8-channel relay module is equipped with transistors, diodes and optocouplers to switch higher loads safely, reliably and with little power. The module is also equipped with generously dimensioned relays in order to be able to reliably carry out many switching processes..
  • ★ 5V 8-channel relay module, each relay requires 70mA for switching (switching capacity AC: max. 250V / 10A.
  • ★ 5V 8-channel relay module can be controlled directly with a microcontroller Raspberry Pi, Arduin, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic, etc..
  • ★ The relay acts as a switch that responds to a signal from the Arduin. Because of this, it is widely used in IoT projects to control lights and other electronic devices..
  • ★ Application: MCU control, PLC control, industrial area, smart home.If you need this relay, you can buy it directly. If there is a problem during use, you can contact us at any time to refund or replace it..
Check Stock

SunFounder 2 Channel DC 5V Relay Module with Optocoupler Low Level Trigger Expansion Board Compatible with Arduino R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi

  • 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current.
  • Equiped with high-current relay, AC250V 10A.
  • Standard interface that can be controlled directly by microcontroller (compatible with Arduino ,Raspberry Pi, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
  • Indication LED's for Relay output status.
  • Size: 50.5mm(L) x 38.5mm(W) x 18.5mm(H)(1.99inch x 1.54inch x 0.73inch).
Check Stock

Sipytoph 37 in 1 Sensor Kit,37 Sensors Assortment Modules Starter DIY Kit with Box for Arduino Raspberry Pi 4 Pi 3,3B,,RPi A,Model B,B,

  • This sensor kit includes 37 sensor modules for you to learn basic knowledge about Raspberry Pi and sensors..
  • Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic..
  • Professional 37-in-1 Sensor Module Kit, Not only compatible for Arduino, but also compatible for Raspberry Pi 3,3B+,RPi A,A+,Model B,B+,2..
  • The highest cost performance kit for electronic hobbyist and advanced learners to expand Raspberry Pi and for Arduino programming..
  • With a detachable lattice plastic storage box, it is very easy to store and carry..
Check Stock

Loto PC Oscilloscope + Logic Analyzer OSCA02L, 2-Channel, 35 MHz Bandwidth, 100M S/s Sampling || USB Oscilloscope +Logic Analyzer (6-Channel TTL Digital inputs) || 8~13 bit Vertical Resolution

  • Hand-held portable || USB 2.0, USB powered || AC/DC coupling || FFT || Math || X-Y Plot || Interpolation || Acquisition Modes || Hardware trigger || Size: 15.25 x 9.32 x 2.31 cm || Net weight: 210g..
  • EEXTENSION:Logic analyzer with 6 TTL channels.Extension port DE-15 for DIY..
  • Zoom in/out || Mouse wheel control || Auto measurement & cursor/ruler measurement || Annotations || Auto set || Save as image || Save as file || Print.
  • Waveform recording and playback || Serial bus decoding || Buffer waveform thumbnail || Waveform comparison reference || Over-voltage warning..
  • 72 hours data logger || Vertical resolution: 8~13 bit (HiRes mode) || Waveform persistence..
Check Stock

ACEIRMC Upgraded Advanced Version 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino IDE R3 for MEGA2560 Nano

  • Received great ideas from our customers and adopted in this upgraded kit. Removed useless modules heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS1307 real time clock module etc..
  • Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+, Complete Update and common models for Mega 2560 starter kit..
  • Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
  • Upgraded tutorial only for R3, for MEGA2560 R3, for NANO in CD, listing paper, resistors pack only from Elegoo Team. There are tutorials in the CD that comes with. or download the tutorials online from the official website..
  • 100% compatible with Arduino official IDE, Raspberry Pi and STM32..
Check Stock

AITRIP 1PCS 8 Channel 5V Solid State Relay Module Board High Level Trigger Compatible with Arduino Uno Duemilanove MEGA2560 MEGA1280 ARM DSP PIC (1PCS)

  • Solid State Relay Module Board has been assembled, and electrical test passed.
  • Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch).
  • Has been assembled, and electrical test passed. Led indicator for each relay. Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch) Input control signal voltage: 0V - 0.5V Low stage (SSR is OFF), 0.5V - 2.5V (unknown state), 2.5V - 20V High state (SSR is ON).
  • Load voltage range: 75 to 264VAC (50/60Hz).
  • Load current: 0.1 to 2 AMP Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
Check Stock

AOICRIE Upgraded Advanced Version 37 in 1 Sensor Modules Kit with Tutorial Compatible for IDE R3 MEGA2560 for Nano, Starter The RFID Learn Suite Kit LCD 1602 for R3

  • 37 Sensors Assortment Kit for Arduino MCU Education.
  • RFID Starter Kit for R3 Upgraded version Learning Suite With Retail Box Upgraded Version of Starter Kit RFID Stepper Motor Learning Kits with a CD for starter learning !!!.
  • Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+, Complete Update and common models for Mega 2560 starter kit..
  • Great sensor kit with tutorials compatible for raspberry pi, Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
  • Upgraded tutorial only for R3, for MEGA2560 R3, for NANO in CD, listing paper, There are tutorials in the CD that comes with. or download the tutorials online from the official website..
Check Stock

Godox AD200Pro Godox AD200 PRO Outdoor Speedlite,200ws TTL HSS 1/8000s 2.4G Pocket Flash Strobe Monolight with 2900mAh Lithium Battery,0.01-1.8s Recycling, 500 Full Power Flashes,Bare Bulb Flash Head

  • ...e compensation. 1/8000s high-speed sync, first curtain sync, second curtain sync, modeling lamp, manual flash, multi flash, Multi Controls the Stroboscopic Rate up to 90 Times.
  • Built-in Godox 2.4G wireless X system,Use Godox 2.4G wireless X system ,Godox AD200Pro Speedlite Studio Monolight is compatible with Nikon I-TTL, Canon E-TTL, Sony TTL, Fujifilm TTL, Olympus TTL, Panasonic TTL,Pentax TTL. With Master＆Slave Function, Godox AD200Pro flash Monolight Can be Used in Combination with Godox TTL Camera Flashes, TTL Outdoor Flashes, etc.
  • 200Ws, with Bare bulb flash head,GN60(m ISO 100, with AD-S2 standard reflector, @28mm), with Speedlite flash head,GN52 (m ISO 10, @35mm). Stable color temperature at 5600° ±100°K over the entire power range. Professional lithium battery pack has large capacity(14.4V/2900mAh) to provide 500 full power flashes and 0.01-1.8s fast recycling.
  • Use Godox 2.4G wireless X system to achieve TTL control or use Godox TTL wireless flash trigger X1 /Xpro/ X2 to wirelessly control functions, wireless adjust flash's power levels, sound beep, as well as triggering the flash. There are also 3.5mm sync cord jack and wireless control port to achieve multiple triggering methods.
Check Stock

AOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino

  • L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
  • Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
  • Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check Stock

WitMotion USB-UART Converter 3-in-1 Multifunctional USB to TTL/ USB to RS232/ USB to RS485 3.3-5V Serial Adapter with CH340 chip Compatible with Windows 7,8,Linux,Arduino for Development Projects

  • 【 Multi-functional】3-in-1 Multifunctional Serial convert adater supports usb-ttl, usb-rs232, usb-rs485, converting function.
  • 【 Robust Design 】Equipped with the built-in logic circuit chip(automatically recognize and convert to the working mode), a status indicating....
  • 【 Superior Compatibility】USB specification 2.0 is compatible with Windows XP/7/8/10 32bits/ 64bits, Linux, Wince, Mac, Vista, etc., Baud rates:....
  • 【 Worry-free Support 】12-month warranty, lifetime friendly customer service by WitMotion team. Option 1. The tutorial link is printed on the....
  • 【 What You Get 】1x WitMotion 3-in-1 serial adapter + 4x Dupont cables + 1x Welcome card, well-packed by an antistatic bag.
Check Stock

Godox AD200 200Ws 2.4G TTL Speedlite Flash Strobe 1/8000 HSS Monolight with 2900mAh Lithium Battery and Bare Bulb Flash Head to Provide 500 Full Power Flashes Recycle in 0.01-2.1 Second

  • Godox AD200 Pocket Flash Speedlite has tiny Body, Interchangeable bare bulb flash heads and speedlite flash head, fast recycle time up to 0.01-2.1s, fast duration up to 1/13000s, When using Godox 2.4G wireless X system. Godox AD200 Speedlite Monolight is compatible with Canon E-TTL, Nikon i-TTL and Sony TTL etc..
  • 200Ws, GN60(m ISO 100, with AD-S2 standard reflector, @28mm) and GN52 (m ISO 10, @35mm). Stable color temperature at 5600 ± 200K over the entire power range. Professional lithium battery pack has large capacity(14.4v/2900mAh)to provide 500 full power flashes and 0.01-2.1s fast recycling.
  • 8 steps of power adjustment (1/1~1/128)offer better light effects. Godox AD200 Speedlite Monolight is Fully support flash exposure compensation. 1/8000s high speed sync, first curtain sync, second curtain sync, modeling lamp(speedlite head only), manual flash, multi flash, C.Fn custom setting, etc..
  • GODOX AD200 pocket Speedlite Monolight has strong power with lightweight and great portability. Easily packed in your pocket. With master slave function,Godox AD200 Speedlite Monolight can be Used in combination with Godot TTL camera flashes, TTL outdoor flashes, etc..
  • Built-in Godox 2.4G wireless X system and fully support of TTL functions,Use Godox 2.4G wireless X....
Check Stock