ReviewsTube Fitting Connectors

Oxygen Tubing Swivel Connector - 10 PCS Cannula Connectors, Avoid Tube Tangles (Male to Male) (10 Count (Pack of 1))

  • ★Prevent Tubing Tangles: The oxygen tubing connectors can solve the problem of oxygen tube knotting, and won't trip you up..
  • ★Leak-Free: These cannula connectors can be tightly connected to the oxygen tube without loosening and causing the oxygen patient to lose oxygen..
  • ★360 Degree Swiveling: The package includes 10 packs of tubing swivel connectors, increase patient comfort and mobility..
  • ★Easy to Use: You can easily connect the two tubes to the length you need using the oxygen hose connectors..
  • ★Durable Material: The oxygen connector is made of safe PE plastic material and can be reused..
Check Stock

2-in-One Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool - for Easier 1/4' Inch Fitting & Emitter Insertion

  • Easy to grip: the handle is made of durable plastic and non-corrosive material.
  • Tight fit: The punching size is 0.118 inches, which can be closely fitted to eliminate waste and maintain proper pressure in the drip system.
  • Uses: Two-in-one dropper punch and 1/4 fitting insertion tool, used for piercing and perforating when installing the dropper and micro sprinkler in the polyethylene tube.
  • Function: Pierce holes of suitable size to connect accessories and connectors.
  • Customer Service: If you have any questions about our products, please contact with us, we provide mail response service and perfect after-sales service..
Check Stock

Straight Push Connectors, 80 Pieces 6/8/10/12mm Quick Release Pneumatic Connectors Air Line Fittings for 1/4 5/16 3/8 1/2 Tube (20pcs Each Size)

  • 【Package Includes】- This straight push connectors set includes 80pcs straight push connectors, there are four sizes and they are 6mm, 8mm, 10mm, 12mm, they are suitable for 1/4", 5/16", 3/8", 1/2" tube and pipe..
  • 【High-quality Material】- Connectors' body are made of Plastic/PE, and there are stainless steel locking claws and NBR O-rings. Once applied, no worries or danger of tubing coming loose..
  • 【360° Rotation】- Straight push connectors the plastic tube can rotate 360 degrees even after installation, they are simple and flexible, and they can meet various requirements of piping..
  • 【Easy Installation】- The release ring adopts an elliptical design, which makes mounting and disconnection easier and more convenient..
  • 【Wide Application】- Quick release pneumatic connectors are widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical..
Check Stock

UltraPure 3403410 1/4\ MPT x 3/8\ Tube Ozonator Compression Fitting

  • Sleeve for a tube compression fitting. Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube.
Check Stock

KTM Racing Tee Black M

  • Self-Stripping electrical tap connectors - Nilight self-stripping electrical t-tap connectors makes tapping into an existing wire a quick and easy job.
  • Versatile kit - 60 piece T-Tap Wire Connectors plus 60 piece.
  • Male Quick Disconnects will last for numerous wiring projects. Marine, automotive,....
  • Thick tinned copper contacts - Thicker tinned copper contacts provide maximum conductivity and prevents the wire from shorting out efficiently.
  • Quality t-tap connector housing - Quick splice T-Tap connectors will securely lock on the wire. Plastic housing will not open after it has been....
  • Perfectly fitting male quick disconnects - Nylon male disconnects have been designed to lock tightly on the T-Tap connectors to prevent sliding out.
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 3/16\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 1/8\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings

  • ...Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the figure 8 end cap plugs used for clamp the end of 1/2" irrigation tubing for stopping water flow. These irrigation fittings can be used as connectors and end plugs for the irrigation hose after using hole punch, helping the hose continue to irrigate evenly during pressure fluctuations, and effectively use water resources..
  • ❀【Multiple Usage】: Ideal for use in elevated flowerbeds, lawns, vineyards, residential, farm, forest gardens, greenhouse gardening and agricultural watering applications. Great for irrigation or sprinkler line repair or expansion. Please confirm the size of our irrigation accessories and your tube carefully before the purchase..
Check Stock

Dweekiy Male Fuel Tank Connector, 1/4 inch Fuel Tank Male Connector Pipe Joint fit for Outboard Motor

  • A motor boat accessories line of fuel line connectors for Yamaha outboard motor 6mm fuel tube..
  • It replaces the end of the fuel connectors fit for Yamaha outboard.
  • This fuel connector also suits China made Hidea motors. Easy installation and replacement..
  • Nice accessories for maintaining or replacement..
  • Purchase Notice : We value the shopping experiences and satisfaction of each customer, so we provide technical support. If the product install or quality have any problem, please contact us in time.We will solve it as soon as possible..
Check Stock

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting, Nut, 1/2\ Tube OD

  • Nut for connecting to a compression tube fitting.
  • Stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304.
  • Maximum operating temperature range of -100 to +1,000 degrees F.
  • Meets ASTM A213 and A269 standards for quality assurance.
Check Stock

620PCS Heat Shrink Wire Connectors-5 Colors / 10 Sizes Electrical Connectors-Waterproof Marine Automotive Terminals Kit-Ring Fork Hook Spade Butt Splices

  • PREMIUM QUALITY WIRE CONNECTORS KIT: 620PCS electrical connectors kit includes ring,fork,hooks,spade and heat shrink wire connectors to meet your daily needs.There are butt connector 70pcs,forks 70pcs,hooks 70pcs,spads 60pcs,female spades 60pcs,rings(10,1/4,5/16,3/8)270pcs and butt connector 26-24 20pcs.They are neatly packed in transparent boxes and can be easily identified by different color-coded tubes with wire gauge markings..
  • WATERPROOF SEALING CONNECTOR:Unique double-wall design helps the marine grade heat shrink ring connectors to be sealed to the end of the barrel after heating, providing all-round protection. The outer polyolefin tube and the inner hot melt ring better isolate air and water..
  • SAFE AND DURABLE:Each wire connector is specially designed for use in harsh environments.The translucent butt connectors uses thick tin-plated brass barrels to prevent wire corrosion and leakage. You can visually see the wires during operation and keep the wires firm during crimping. Make your work safer!.
  • SIMPLE AND QUICK OPERATION:Just put the Electrical Connectors into the marked jaws for crimping, and the rotary connector is heated with a heat gun. The heat-shrinkable tube will be reduced in size and glued to the wire. It is safe and simple to operate....
Check Stock