ReviewsTube in tube Heat Exchanger

OBPFY OBPSFY Car Air Conditioning Orifice Tube Removal Tool,A/C Orifice Tube Remover/installerr

  • ?Orifice Tube Remover? x Car air conditioning orifice tube removal tool,for remove and install orifice tubes,auger for removing broken Orifice tubes,simply turn into Orifice tube for grip, Use the nut to apply even and steady pressure so you don’t damage the small plastic ears on the orifice tube,then remove Orifice tube.Professional tools will make replacement and maintenance easier.Fits many GM..
  • ?Material? x Orifice Tube Removal Tool is made of high quality metal,sturdy and durable, can be used for a long time..
  • ?Easy to use? x This tools slides in and locks on to tabs on the orifice with a slight twist,then able to pull / rotate the old orifice until it could get out.It saves time trying to weasel a pair of needle nose pliers into a small area to pull out the old orifice tube.No worries about snapping off the end with pliers..
  • ?Tip? x Sometimes you have to add a little bit of heat on the pipe to make the other fees to loosen up a little bit because otherwise sometimes for the brakes and it's going to be more hot to take it out so it's better to apply some heat the heat down and then start pulling..
  • ?Package? x 1 X Car Air Conditioning Orifice Tube Removal Tool.
Check Stock

BestEquip Heat Exchanger 3'x7.5' 60 Plates Brazed Plate Heat Exchanger 316L 1/2' BSP FPT Heat Exchanger EATB12 Beer Wort Chiller for Hydronic Heating

  • High Thermal Efficiency: Turbulent-flow design moves the two media in opposite directions and creates strong turbulences for superior heat transfer rates and efficiency. Our heat exchanger series have been certificated by CE..
  • Energy Optimized: This heat exchanger stainless can heat water to the preset temperature, which is super energy-saving with no electricity consumption and no oxygen consumption..
  • Robust Construction: This 60 plate heat exchanger features 316L stainless steel sheets, which are brazed together at the edges and the matrix of contact points for a reliable and rugged part to form a durable, integral piece that can withstand high pressure and temperature. Four thickened BSP FPT ports for your easier installation..
  • Compact Design: Corrugated plate design of this plate chiller wort allows for substantially smaller build and footprint at an equivalent or better performance compared to other heat transfer devices – resulting in significant space savings..
  • Highly Versatile: This heat exchanger beer offers the highest level of thermal efficiency and durability in a compact &lightweight unit, ideal for industrial oil cooling, refrigerant evaporators, and condensers, residential and light commercial HVAC hydronic systems..
Check Stock

3Pcs 14mm OD Hard Rigid Tube Bender Mould Tool Kit, Rigid Tubing 45/90/180 Degree Bending Kit, Acrylic Bending Jig Set, Hard Pipe Bend Die Tube Tool Suitable for Water Cooling System

  • 【Bender Mould】3Pcs Hard Rigid Tube Bender Mould Kit is mainly used for angle setting. Heat the hard tube to a certain degree, then place the tube on the grinding tool at different angles to shape it, and the required angle can be bent.
  • 【Wide Application】Hard tube/Acrylic tube bending tool set. Multi-angle acrylic bending mould for AWGM3 series, each group with a total of three. 45/90/180 curvature, suitable for 14mm rigid tubes.
  • 【High Quality】 The tube bender is made of ABS plastic material, the angle of the positioning groove is precise, and the molds are mirror polished to ensure the best contact effect between the finished product and the tube body.
  • 【Bending Tool】It is convenient and simple, a good helper for hot folding. The bending kit is an ideal tool for professionals and beginners, measuring / cutting / heating / bending. Need enough heat to bend (such as a heat gun).
  • 【Note】This bending mould set is suitable for 14mm rigid tube, please check it before use. The heat gun must be used in a ventilated place, wear protective gloves and goggles. If you have any questions, please contact us.
Check Stock

BestEquip Heat Exchanger 3 x7.5 30 Plates Brazed Plate Heat Exchanger 316L 3/4 MPT Heat Exchanger B12-30 Beer Wort Chiller for Hydronic Heating

  • 【HIGH THERMAL EFFICIENCY】- Turbulent-flow design moves the two media in opposite directions and creates strong turbulences for superior heat transfer rates and efficiency. Our heat exchanger series have been certificated by CE. Dimension: 7.8" x 3" x 3.7" / 20 cm x 7.8 cm x 9.5 cm..
  • 【ENERGY OPTIMIZED】 - This heat exchanger stainless can heat water to the preset temperature, which is super energy-saving with no electricity consumption and no oxygen consumption..
  • 【ROBUST CONSTRUCTION】- This 30 plate heat exchanger features 316L stainless steel sheets, which are brazed together at the edges and the matrix of contact points for a reliable and rugged part to form a durable, integral piece that can withstand high pressure and temperature. Four thickened MNPT ports for your easier installation..
  • 【COMPACT DESIGN】- Corrugated plate design of this plate chiller wort allows for substantially smaller build and footprint at an equivalent or better performance compared to other heat transfer devices – resulting in significant space savings..
  • 【HIGHLY VERSATILE】-This heat exchanger beer offers the highest level of thermal efficiency and durability in a compact & lightweight unit, ideal for industrial oil cooling, refrigerant evaporators, and co....
Check Stock

Aonomi Compatible Industrial Heat Shrink Tube Labels Replacement for DYMO 18053 Fit with DYMO Rhino 4200 5200 5000 6000 Industrial Label Maker Black on White 3/8 x 4.9 ,10-Pack

  • Compatible with DYMO Rhino Pro 1000, 3000, 4200, 5000, 5200, 6000, ILP-219, 3M PL100, PL200, PL300 and Tyco T107M label makers..
  • Size of Each Tape: 3/8 inch (9mm) wide, 4.9 feet (1.5m) long. The size indication for this Heat-Shrink Tube is the width of the flattened tube as a....
  • Made of industrial grade polyolefin offers a 3:1 heat shrink ratio make sure to fit on wires or cables and make heat-shrink tube labels indispensable....
  • Heat shrink tube offers an excellent method of labeling wires and cables: Fantastic custom heat shrink solution, print legibly and shrink up perfectly....
  • All heat-shrink tube labels offer the convenience of printing directly on the tubing itself with any Industrial labeling tool for high-end cable....
Check Stock

Eastern Bikes BMX Eastern Grim Reaper Frame Black 21

  • Helix down tube, top tube & chain stays: ribs inside the tubing help prevent denting and yield a higher strength-to-weight ratio.
  • Classic EB cut-out in the head tube and reinforced cutouts in seat tube .
  • Offset butted and heat-treated head tube.
Check Stock

Stainless Steel Wort Chiller, Beer Cooling Coil, Food Grade Domestic Beer Cooler, Water Cooling Spiral for Wine Making Machine, Home Brewing Accessory,Kitchen Supplies 9.52mm X 0.6mm X 8.8m

  • 【HIGH THERMAL EFFICIENCY】- Turbulent-flow design moves the two media in opposite directions and creates strong turbulences for superior heat transfer rates and efficiency. Our heat exchanger series have been certificated by CE. Dimension: 7.8" x 3" x 3.7" / 20 cm x 7.8 cm x 9.5 cm..
  • 【ENERGY OPTIMIZED】 - This heat exchanger stainless can heat water to the preset temperature, which is super energy-saving with no electricity consumption and no oxygen consumption..
  • 【ROBUST CONSTRUCTION】- This 30 plate heat exchanger features 316L stainless steel sheets, which are brazed together at the edges and the matrix of contact points for a reliable and rugged part to form a durable, integral piece that can withstand high pressure and temperature. Four thickened MNPT ports for your easier installation..
  • 【COMPACT DESIGN】- Corrugated plate design of this plate chiller wort allows for substantially smaller build and footprint at an equivalent or better performance compared to other heat transfer devices – resulting in significant space savings..
  • 【HIGHLY VERSATILE】-This heat exchanger beer offers the highest level of thermal efficiency and durability in a compact & lightweight unit, ideal for industrial oil cooling, refrigerant evaporators, and conden....
Check Stock

Flex-a-lite 315960 Extruded Core Radiator and Triple Electric Fans (1984-2001 Jeep Cherokee XJ)

  • New Flex-A-Lite performance radiators use a unique Extruded Tube Core technology, replacing multi-core radiators with an advanced design.
  • The Extruded Tube Core increases contact area between coolant and the aluminum tubes for better heat rejection and cooling.
  • The cooling fins have been designed with louver patterns cut into them to direct airflow, improving heat rejection and cooling.
  • The Flex-A-Lite Extruded Tube Core Radiators are significantly stronger and have a 100-psi burst rating.
  • Flex-A-Lite Extruded Tube Core Radiators include a corner subhead, reinforcing the cooling tube to header connection.
  • an area prone to cracking and leaking in other brands of aluminum radiators.
Check Stock

KIMISS 51mm/2in Exhaust Middle Pipe, for Suzuki GSX-R600/GSX-R750, Motorcycle Stainless Steel Exhaust Vent Middle Link Pipe with Clamp (K7)

  • ...oducts and best services. If you have any questions about our products, our professional customer service team will solve your problem in time.
  • Applicable models Exhaust medium pipes are the perfect alternatives of African twins Twin CRF1000L ADV 2016 2019, performance stable, reliable.
  • Easy to install Exhaust medium tube is easy to install, there is no fault code when installing the system, no additional tool or device, direct replacement or damage.
  • Hydraulic Forming Technology Tube in motorcycles uses tube hydraulic compression product, which injects pressurized water into each tube to form a desirable shape of high quality exhaust stream. Surface gloss, processing process does not cause crease or damage to stainless steel.
  • Premium materials exhaust medium tube is made of high quality stainless steel material, cone tube, thickness of 1 mm / 0.04 inches, heat and high temperature resistance, not easy to deform or bend, can be used for a long time.
  • After sales service We are committed to providing the best products and best services. If you have any questions about our products, our professional customer service te....
Check Stock

uxcell Carbon Fiber Round Tube 4mm x 2mm x 420mm Carbon Fiber Wing Pultrusion Tubing for RC Airplane Quadcopter 8Pcs

  • Size and Shape: Rounded tube with 8mm/0.3'' outside diameter, 6mm/0.23'' inner diameter, 330mm/13'' overall length..
  • Lightweight strong black carbon tube with good flat and smooth finish, corrosion-resistant, and heat-resisting..
  • Smooth Surface: made of high tensile carbon fiber, matte surface..
  • Application: Carbon fiber tube widely used in racing drones arm, RC helicopter wing structural support, RC airplanes,RC boat, kite spars, 3D printer bracket clamp rack tube, landing leg tube, linear bearings tubes, extended tube, quadcopter support tube, etc..
  • Note: due to manual measurement, most carbon fiber tube sizes will have a little error..
Check Stock

Unicoshape Patio Heater Replacement Parts - 49.5 Tall 4 Diameter - Quartz Glass Tube - Compatible with Four-Sided Pyramid Flame Outdoor Heater - with Neoprene Rubber Silicone Connecting Ring

  • 【GLASS TUBE FOR PATIO HEATER】This Quartz glass tube is a perfect replacement part for a four-sided Pyramid Flame Heater. You can fit this 49.5" long tube into any standard Pyramid Heater to get it back to full working order. This patio heater replacement glass tube doesn't fit with three-sided heaters..
  • 【EASY INSTALLATION】Our Pyramid patio heater parts are easy to install, with a special black rubber connecting ring included for attachments, so getting your outdoor space back up and running should be no trouble. Once installed this propane heater glass tube replacement should last a long time. It only takes one minute for a person to replace , refer to the video..
  • 【 HIGH TEMPERATURE RESISTANCE】This heater glass tube replacement piece is made from strong and heat-resistant Quartz glass. This makes the glass hard to damage and helps it maintain a good condition during combustion, even in poor weather conditions. Outdoor heater replacement parts have to be able to handle heat!.
  • 【QUALITY CONDUCTION】Quartz is a great glass for the conduction and radiation of heat. This replacement glass for patio heater usage will work perfectly, warming you up on chilly winter evenings where you fancy a touch of fresh air. The conduction is fast-ac....
Check Stock