ReviewsTubing As Per Api

9' L Reciprocating Saw Blade, 5 pk.

10 TPI, 9 in. Length, Bi-Metal Construction.
1/2 in. Universal Tang fits all Sawzalls.5 blades per pouch.Ideal for demolition, plumbing, remodeling and general metal cutting. Cuts pipe, channels, tubing, angle iron up to 4 in., nail embedded wood, and steel.Limited warranty.
1/2 in. Universal Tang fits all Sawzalls.
Ideal for demolition, plumbing, remodeling and general metal cutting. Cuts pipe, channels, tubing, angle iron up to 4 in., nail embedded wood, and steel.

Protects against severe temperatures to help extend service life.Fit Type: Universal Fit.
Formulated with extreme-pressure additives to minimize gear wear from shock loads.
Helps protect against gear wear from scuffing, scouring, corrosion and pitting.
Recommended for conventional hypoid differentials and non-synchronized manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or GL-4 fluid is specified.

The Peep Sight tubing is made from high-impact silicone which will provide years of worry free use. This self-aligning peep sight eliminates the twisted peep upon draw so you are sure to be ready when the moment of truth arises..
The premium Silicone Peep Tubing assures that you will eliminate the dry rot and cracking that is so common with other tubings. With the color matched tubing, your bow will have a custom look that will add to the style of your bow package..
Premium Long-lasting silicone peep tubing designed to fit 1/8, 1/4, 3/16 peep sights that require tubing..
Precision cnc-machined, 6.5ft/2m total length per tubing. Ensure that the shooting target and sight and draw bow peep sight in the three-point line position, improve accuracy..
Absolutely satisfied after-sales service: If the product has any quality issue, please contact us immediately, free replacement or full refund..

Works like soaker hose only better because it doesn’t clog and requires no maintenance.
Pressure-compensating emitters water plants evenly from beginning to end of tubing throughout the planting area.
Emitters feature two outlet holes, one on either side of tubing (180° apart).
Built-in 0.8 gallon per hour emitters spaced 6" apart.
Unique Micro-Porous construction creates an ultra-tight connection.
Attach to 1/2" Drip tubing with 1/4" barbed fittings.
Tubing specifications: outside diameter 0.25.

ENHANCED MAXLIFE TECHNOLOGY PREVENTS engine breakdown in extreme conditions with 50% better wear protection than the industry standard.
TREAT AND PREVENT LEAKS with premium seal conditioners to keep oil out of places it shouldn’t be.
25% EXTRA DEFENSE AGAINST DEPOSITS, sludge, corrosion and rust via interior-cleansing detergents.
EXTREME TEMPERATURE PROTECTION through our high-quality base oils and superior viscosity modifiers.
MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN.

SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing)..
PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur..
DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE..
ECO FRIENDLY: Provide water directly where you need it without any overspray!.
EASY TO INSTALL: Install emitters directly into the 1/2 main line or branch off with 1/4 inch tubing and connect fittings to the ends!.

MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” tubing.) DOES NOT FIT BRAIDED HOSES..
MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the....

MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard.
REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners.
REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside.
ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents.
MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN.

Dispenses product from drums as well as both 5 and 7 gal. open-head and closed-head pails..
Constructed of polypropylene and polyethylene.
Delivers 8 ounces of liquid per stroke Threaded to fit a 2” drum opening.
Adapter is included to permit attachment of pump to flexible spout Cap included with a 3/4 Comes with 19-1/2.
Also included: 1-1/2" and a 3" split tube that may be used to limit the pump stroke and dispensing volume to 6, 4, 2 oz per stroke Cap included with a 3/4” thread Comes with 19 1/2 tubing.

Made from Pennzoil's patented gas-to-liquid PurePlus Technology combined with a high-performance additive system for complete protection.
Full synthetic 5W-30 motor oil tailored to meet the demanding requirements of modern diesel engines with particulate filters, as well as modern gasoline engines.
Helps keep pistons cleaner than required by the toughest industry standard.
Provides up to 1.7% better fuel economy based on ACEA M111 fuel economy results vs. the industry reference oil.
Helps protect loss of horsepower, and provides 40% better wear protection than required by API SN specification based on Sequence IVA wear test.
Meets or exceeds the toughest industry standards based on API SN and ACEA C3.
Meets or exceeds the requirements of the following industry specifications: General Motors dexos2 license GB2E1104014.