ReviewsTungsten Carbide Drill Bit

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....

Check Stock

MelodySusie Nail Drill Bits Set, 7pcs Tungsten Carbide Diamond Nail Drill Bits for Acrylic Nails Poly Gel Cuticle Remove, 3/32'' Professional Nail Bits for Nail Drill Efile, Manicure Pedicure Tools

Tungsten Carbide Diamind Nail Drill Bits | Tungsten Carbide Nail Bits: 1pcs Fine Grit/ 1pcs Medium Grit/ 1pcs Coarse Grit | Color: Colorful/ Silver | Shank Size: 3/32'' | Two-Way Rotation.
Fast Remove on Acrylic Gel Nails: Comes with 3pcs Large Barrel/ Barrel Ball/ Torch Cylinder nail drill bits, all are made of optimum strength tungsten carbide material, it does great jobs for sharpening, polishing, carving, grinding all kinds of acrylic gel nails, dip powder, builder gel nails, and thick extension nails. Special design for professional nail techs and nail salons..
Safty Cuticle Clean Nail Drill Bits: Comes with 3pcs Flame Bit/ Nib Bit/ Ball Bit diamond nail drill bits, it works great for all-around nail cleaning, such as cleaning under nails, removing cuticle area dead skin, shortening the nails, smoothly polishing nails surface, preparing the nail bed, and drilling nail holes..
Low Heat & Low Noise & Less Dust: Made of premium strength material with high precision machining, it features superior strength, sharpness, heat resistance, corrosion-resistant, durability, and long-lasting. High-quality material and rigorous test design, it creates less dust with little friction and heat, protecting the skin from overheating harm..

Check Stock

Gunpla 10Pcs Multi-Material Drill Bits Set, Cemented Carbide Masonry Drill Bits for Glass, Plastic, Tile, Concrete, Brick, Wall, Wood and Brick Wall 6mm

【APPLICATION】: Ideal for drilling ceramic tiles, glass, marble, and mirrors. When drilling hard materials, please use water for lubrication, good cooling can extend the service life of the drill bit. The glass drill bits are typically used with electric drills to create holes in all these cited material.
【TUNGSTEN CARBIDE TIP】: The ceramic drill bit feature a Tungsten carbide tip for extended bit efficiency and life. During the process of drilling, the coating rubs away the glass, creating a perfect hole in the material being drilled.
【WHAT YOU GET】: The package includes 10pcs 6mm glass and tile drill bits and a plastic storage box, easy to carry. The multi construction glass bits are smooth, straight and has an ideal texture.

Check Stock

30 Pcs Nail Drill Bits Set - 3/32 Inch Tungsten Carbide Ceramic Nail Drill Bits Acrylic Gel Nail Bit Diamond Cuticle Electric Nail File Cuticle Remover Bits Home Salon Manicure Pedicure Tools

... grinding, sharpening, carving builder nail gel nails or acrylic nails, professional nail drill set to meet all needs of cuticles removal, shaping or removing gel art nails..
Never Rust & Designed to Last: These nail drill bits are mainly made of quality ceramic materials, the highest precision standards diamond and tungsten carbide with superior strength, sharpness, heat resistance and corrosion resistance, not easy to break, rust or deform even if they are repeatedly applied, good craftsmanship, and tried and tested design will protect your skin..
Universal Compatibility: Universal 3/32-inch nail drill bits for acrylic nails fit most electric or rechargeable manicure nail file machines. Quickly and Perfect for cleaning, prepping, shaping, shortening, cuticle work under the nail backfills. Perfect for nail salon, beauty parlor, spa or manicurists, personal manicure pedicure, manicure beginners DIY nail art at home, enjoy your nails art experience at home with sisters and friends..
Easy to Store and Carry: 3 sets of small and cute nail drill storage boxes are easy to store or carry.
The dust proof and transparent nail bit box can help you quickly find the nail bit you need, which is convenient for individuals and families to use anytime and anywhere....

Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....

Check Stock

Rannb Carbide Hole Saw 4.5-inch/115mm Cutting Dia Hole Cutter for Cutting Stainless Steel & Iron

⭐【Material】Our hole saw adopts premium Tungsten Carbide Tipped(TCT) with high hardness and good wear resistance..
⭐【Dimension】Cutting Diameter: 115mm /4.5".
⭐【Ideal Design】Pilot Drill Bit is used to locate the position precisely and protect carbide teeth from impacting when the pilot drill bit....
⭐【Package Content】1pcs x Hole Saw Drill Bit + 2 x Pilot Drill + 1 x Hex Wrench.
⭐【Applicable Materials】Quick, precise, smooth cuts into up to 5mm~27mm thick material ,especially designed to cut alloy, iron, stainless steel....

Check Stock

MelodySusie Cone Shape Nail Drill Bits, 3/32'' Carbide Tungsten Bits, Suitable for Manicure Pedicure Cuticle Gel Polishing, Beginners Bits, Rose Gold, Series Bit-S, Fine

...one direction working direction, this carbide nail drill bit only works for right-hand use, also suitable for both left-handed and right-handed use if your nail drill machine has forward and reverse functions..
Professional Nail Drill Bits: Made of the hardest YG6X carbide tungsten material, this high-precision machining nail bit comes with excellent heat dissipation, low vibration, low noise, and hard-wearing features. Fast to remove acrylic nails, dip powder, polygel, and hard gel nails..
Fits Well with Most Nail Drill: Universal 3/32" (2.35mm) tungsten steel shank perfectly suits most professional electric nail drills on the market. These cone shape bits are suitable for beginners to start their journey. Please note that to prevent breaking, the nail drill bits cannot be dropped..

Check Stock

Makartt Nail Drill Bits, 7Pcs Tungsten Carbide Diamond Ceramic Nail Drill Bit Set For Acrylic Nails 3/32 Drill Bits For Nail Drill Remover Gel Polish Poly Nail Gel Nails Cuticles

...ts are perfect ideal nail art tools for professional jobs such as cleaning, grinding, sharpening, polishing, carving, sanding and so on. Suitable for all gel nails such as acrylic nails, gel nail polish, poly nail gel, dip powder, great tools value for money..
Premium Quality Nail Drill Bit Set: Made of high quality tungsten carbide, the hardest material next to diamonds, Makartt professional nail file drill bits are sturdiness, hard-wearing and durable to use. Perfect for removing hard gel nail, creating less dust with little friction and heat..
Easy to Clean Safety Drill Bit: Tungsten carbide material nail drill tips are corrosion resistant, as well as no clogging for nails. Come with a nail brush bit can easily clean the dust on the bits or nails, protect the bits after each use, keep you and your client’s nails healthy..
Universal Nail Bits For Nail Drill: Suitable for most size 3/32" nail drill machine. Suitable for nail salon, beauty parlor, spa or personal manicure pedicure, DIY nail art at home.It is a funny thing to apply nails at home with family and friends..
Compact Design: With its portable design, lightweight, these acrylic nail drill bits are easy to hold for both personal and family use anytime and anywhere. See-through design help....

Check Stock

Hakkin 12 Pcs Masonry Drill Bits Set, 3mm - 12mm Concrete Drill Bits Set for Cement Glass Wall Brick Wood, Metric System Tungsten Carbide Tip Triangle Alloy Industrial Strength with Storage Case(Blue)

... Install】The drill bit can be installed and used, cordless electric drill general-purpose, bench, electric drilling and hand drill. The drilling speed of the Multi-material Drill Bit should be slow, especially in the beginning of drilling. The larger the diameter, the slower the speed requirement..
【High Quality Tungsten Carbide】Multi-masonry drill bits are made of high-quality tungsten carbide. It has a variety of properties such as durability, rust resistance and excellent abrasion resistance, remain sharp for a long time that make the drilling much more easier, less effort and work with a minimum of pressure..
【Ergonomics Design】Anti-skid triangle handle head design is firm in operation, and the flashlight griping does not slip. Special U groove drill design speeds up chip removal, improves work efficiency and saves time and effort. A spear-pointed tip design gives this product greater precision and piercing power. Like a hot knife thru butter!.

Check Stock

Threads

【5Pcs Solid Carbide Burr Bits】The grinder drill set is made of tungsten carbide, high sharpness and good toughness, machining hardness up to HRC70, great for carving, polishing, drilling.
【Metal Die Grinder Drill Bit】The rotary file is widely used for processing metal(include hardened steel) and non-metal( like wood, bone and marble), perfectly fits for die grinder and drill.
【1/4” Shank Rotary Burr】Size: Shank-1/4inch(6mm), Tip Head-5/16inch(8mm), Total Length 58-65mm, Cutting Burr Shape: Ball, Round Nose, Pointed Tree, Cylinder with End Cut and Cylinder with Round Head.
【Double Cut Head Design】The double burr can cut cleanly and quickly through hardened steel, with smoother surface and no dust pollution compared with grinding wheels or steel cutter.
【Wide Applications】The tungsten grinding bits are widely used in woodworking carving, mold processing, burr cleaning and impeller polishing.
Plus package comes with plastic case for safety storage and protection.

Check Stock

SDS Plus Hammer Drill Bit 50Pcs 1/4 in. x 6 in. Masonry Concrete Rock Drill

✔️ 【SDS DRILL BIT DIMENSION】: 1/4" (Diameter) x 6" ( Overall Length).
✔️ 【APPLICATION】: SDS Plus Drill Bit Is Ideal for Drilling In Concrete, Masonry, Stone, Bricks and Other Construction Projects.
✔️ 【SDS DRILL CARBIDE TIP】: YG8C Tungsten Carbide Tip Ensure Quick Easy Drilling with Long Cutting Life.
✔️ 【SDS PLUS HAMMER DRILL DOUBLE FLUTE】:S4 SDS Double Spiral Flutes Keeps Fast Easy Chips Removal with Fast Cut Speeds.
✔️ 【SDS PLUS SHANK】: Made of Premium Quality of Crv Steel to Ensure the Long Cutting Life..

Check Stock