ReviewsTungsten Carbide Milling Cutters

Piscifun Carbon X Spinning Reel with Fishing Pliers

Feather Light - The Carbon X is meticulously crafted with an all carbon fiber body, rotor and side plate making it one of the lightest in its class,....
Anti-Corrosion Aluminum - The aircraft-grade anodized aluminum delivers excellent corrosion resistance, great for long term use without any signs of....
Multiple Retrieves - The Piscifun Carbon X spinning reels features a lightning fast 6.2:1 gear ratio as well as a buttery smooth 5.2:1 in our 1000....
Tungsten Carbide Cutters - The Sharpest Tungsten Carbide Cutters (which are fully replaceable) of any pliers on the market, make it extremely easy to....
Silky Smooth - You will be amazed at the incredible smoothness of the Carbon X, the 10+1 shielded stainless steel ball bearings are critical for....

Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..

Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..

Check Stock

uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..

Check Stock

EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving

Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
The router bit suit for CNC router and any plunge routers with 1/2" collet..

Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..

Check Stock

KastKing Intimidator Fishing Pliers,Floating Fish Lip Gripper,Teflon Coated Steel Pliers, Muti-Function Fishing Pliers Hook Remover Split Ring,Fly Fishing Tools Set,Fishing Gear,Fishing Gifts for Men

Key Features - Floating lip grip will not sink - Tungsten carbide line cutters slice through mono, fluorocarbon and braided fishing line with ease – Tough S45 steel construction will never bend or break – Teflon coating – Open split rings to change hooks – Crimp split shot or build leaders – Tune baits.
Tungsten Carbide Cutters – Super hard tungsten carbide cutters slice though mono, fluorocarbon, or braided fishing line with ease. Side mounted anvil cutters for easy access, cutters on KastKing Intimidator Fishing Pliers allow you to cut your tag end as close to the knot as you desire without any obstructions The raised surface behind the blade ensures your line will always be in the cutting zone..
Teflon Coated Steel – KastKing Intimidator steel fishing pliers are made from durable S45 steel with a Teflon coating for added protection. This extremely rigid and durable material resists bending and breaking to ensure long term performance of your fishing gear. This fishing tool is ideal for freshwater environments..
Multi-Function Jaws – Use the serrated jaws on any fishhook as a fishhook puller or use the spl....

Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..

Check Stock

Tides Fishing Pliers with Leather Sheath Saltwater/Freshwater-Quality Offshore/Inshore Anti-Corrosive Fish Pliers with Tungsten Steel Braid and Wire Cutters. No Hassle 1-Year Warranty. (Silver)

Integrated Tungsten Carbide Wire, Mono & Braid Cutters.

Check Stock

KastKing Cutthroat 7 Fishing Pliers,420 Stainless Steel Fishing Tools,Saltwater Resistant Fishing Gear,Corrosion Resistant Teflon Coating,Rubber Handle 7 Straight Nose Stryker Green

Corrosion Resistant Stainless-Steel – The KastKing Cutthroat fishing pliers are made from super hard 420 stainless-steel and coated with a tough....
Tungsten Carbide Cutters – Super hard tungsten carbide cutters slice though mono, fluorocarbon, or braid with ease. Side mounted anvil cutters for....
Multi-Function Jaws – Grab and remove any fishhook with the serrated jaws or take advantage of the crimping slots to secure a split shot weight or....
Rubber Handle – The ergonomic textured rubber handle provides comfort and control. A thin grip profile and the spring-loaded jaws allow for easy one....
Sheath/Lanyard Included – Includes a custom molded sheath with belt clip to ensure your investment is protected from normal wear and tear. Clip on....

Check Stock

Carbide Burr Set 8pcs JESTUOUS 1/4 Inch Shank Diameter Double Cut Rotary Files Metal Grinding Polishing Carving Tool Drill Bits for Die Grinder Kits

『Widely Usage』Carbide burrs fit most small rotary tools,die grinders,for woodworking drilling carving engraving milling porting..
『Diffrent Shapes』Different shapes can meet your need,easy to grasp and use, safe and reliable..
『High Quality Material』Made of heat-treated tungsten carbide material,sintered and machined from 100% new raw tungsten carbide..
『Application』Used for metal working in mold and pattern making, die sinking, surface cleaning and maintenance,perfect for opening holes, or porting heads on ferrous materials..
『8 Items』8-piece double cut carbide rotary file burr set,Includes SA, SC, SD and SF type burrs..

Check Stock