ReviewsTungsten Carbide Mining Inserts

8Pcs Tungsten Carbide Cutters Inserts Set for Wood Lathe Turning Tools(Include 11mm Square with Radius,12mm and 8.9mm Round,30x10mm Diamond with sharp point),Supplied with Screws

This Combination Carbide Inserts Set match our 6pcs woodturning tool set perfectly . The will give the Best Selection for your Woodturning job. It fits Aogbra 6pcs Woodturning Tools Or Other Similiar Brand Tools.Easy to replace your jointers and planers.
4 different carbide cutters satisfy all you demand:Square With Square(11*11mm),Diamond Shaped (10mm*30mm),2pcs Round (Ø12mm*2.5mm) and (Ø8.9mm*1.85mm).
Made of solid tungsten steel,providing you a better experience and durable use.
This is a combination set that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners.
All the carbide inserts are supplied with screws.

APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.

Tungsten Carbide Tungsten Carbide- Just three or four strokes will restore your blade..
Ceramic Sharpening Rods- Tungsten Carbide Polish to a finished edge in three or four strokes..
Serrated Knife Sharpener- Designed to get inside even the smallest serrations..
Diamond Tapered Rod- For fast reconditioning and maintenance..
Sharpening angles are pre-set at 22. 5º to achieve a 45º inclusive angle.
Tungsten Carbide-Three Or Four Strokes Will Restore Your Blade.
Ceramic Sharpening Rods-Polist To A Finished Edge In Three Or Four Strokes.
Serrated Knife Sharpener-Designed To Get Inside Even The Smallest Serrations.

Standard Cutter Size: 14.3mm square with straight corners 2mm thick,2 indexable cutting edges, 50 degree cutting bevel. Inserts are used on planers/jointers with helical cutterheads..
Made of Premium K10 grade solid tungsten carbide, double life-time than general carbide cutters, and had been increased 30% hardness by our high temperature quenching..
Each cutter has 2 indexable sharp edges, if one is dull, no more sharpening, just turn to another edge which greatly reduces you down time. The right geometry or cutting angle is ground to the produce an edge the cuts cleanly and safely..
The inserts had been high precision polished, which increased the oxidation resistance and corrosion resistance of the cutter, combined with optimal grinding process to produce the flattest and truest cutting surfaces..
What You Get: Pack of 10 14.3 x 14.3 x 2mm square straight replacement carbide cutters, 10 pcs of professional M6 screws, our worry-free 12-month warranty, and friendly customer service. TJATSE committed to give Best Selection for your woodworking job..

1.Package include: 7pcs Holders with inserts (Installed,as the pictures show),Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included.
2.The holders made of quality cemented carbide and tungsten steel（40CrMo）, HRC up and down 48 degrees ， high hardness,Offer long life and faster cutting speed.
3.The inserts: carbide material with CVD coating ,used for machining stainless steel and steel,Used for turning and finishing on a wide range of materials，the blade is sturdy, low friction coefficient, wear-proof and stable，Good wear resistance, sharp and durable ,smoothing cutting.
4. 7pcs different angles can cut out any model you want with high precision，S12M-SCLCR06 is 5.9 inches/ 150 mm.
cutting angle is 95 degree, cutting direction is right hand，S12M-SCLCL06 is left hand , the dimensions as the same as the right hand, other 5pcs holders is 3.9inches/100mm, and the shank diameter is 1/2.

【TUNGSTEN CARBIDE SERRATED TIP】Tungsten carbide inserts maximize control and precision, provide exceptionally durable and hard edges, and allow blades to stay durable for a significantly more extended period..
【MEDICAL GRADE STAINLESS STEEL】Manufactured from Premium Quality stainless steel, Olsen Heger Needle Holders Conforms to Quality Standards. The Premium Quality composition of these needle holders with Scissors offers a long life of strong performance, as they are built to last.
【FUNCTIONAL ERGONOMIC DESIGN 】Equipped with an ergonomic design to finish the task at hand and simplify your life. Olsen Hegar offers two in one needle drivers where the front end does the suturing and next to that is a scissors for cutting for precise and simple operations and make for a comfortable experience. The forceps length is 6 inches which is ideal for some operators. It gives great hold and an excellent 3 step locking mechanism..
【AUTOCLAVABLE AND CORROSION RESISTANCE】Smooth finish for aesthetic and corrosion resistance. Hegar Needle gives a high Degree of Precision and Flexibility while conducting the Clinical Procedures.
【ARTMAN QUALITY】our fabrication process and products are thoroughly supervised and tested, to make sure we provide the ....