ReviewsTungsten Carbide Pilot

HLOFIZI 6 Inch Hole Saw Tungsten Carbide Tipped for Recessed Lights, Drilling Metal, Hardwood, Nail-Embedded Wood, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

  • Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 6” bi-metal hole saw.
  • Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass. Also Ideal for recessed lights.
  • Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 6 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

AUTOTOOLHOME TCT Hole Saw for Steel Tungsten Carbide Tipped Hole Saw Drill Bit T.C.T Hole Cutter with M2 Titanium Plated Pilot Drill Bit Professional for Hard Metal Stainless Steel Cast Iron (2-3/8\(60mm))

  • This Tungsten Carbide Tipped hole saw made from high quality TCT Carbide,carbide tooth with high hardness and good wear resistance.,with detachable M2 Titanium-Plated Pilot center drill bit ,higher hardness, better positioning, and no rust,it's hard to break.an excellent alternative to traditional Bi-Metal Hole saws..
  • Quick cutting, more precise, smooth,longer service life cuts up to 1~25mm thick material like stainless steel, high alloy steel, aluminum, castings, section steel, iron, copper and other hard alloys. plastic,wood, FRP and PVC.Note: Cannot be used for concrete, tiles and stone..
  • This TCT hole Saw teeth designed with Three-blade,with outer blade, middle blade, inner blade, small incision resistance and no burrs during drilling. Opening neat, smooth, no broken edges, no tremor phenomenon, chip easily.ideal for cutting hard metals.
  • T.C.T. cutters widely used for electrical construction, transit work and general metal fabrication.Suitable for installation in drill presses, bench drills,hand held electric drill,impact drill,magnetism drilling machine and so on..
  • The spring loaded pilot bit ejects the cut slug, saving time. The cutter body with chip hole,Fast chip removal, then cuts a clean, burr-free hole faster than conventional twist drills or ....
Check Stock

HLOFIZI 1-3/8 Inch Hole Saw (35 MM) with Tungsten Carbide Tipped for Drilling Metal, Hardwood, Nail-Embedded Wood, Stainless Steel, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

  • Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 1-3/8” bi-metal hole saw.
  • Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass and more.
  • Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 1-3/8 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

High Speed Steel Drill Bits Set(4 Pcs), Titanium Step Drill Bit Set with Automatic Center Punch, Multiple Hole Stepped Up Bits for DIY Lovers

  • 10 TIMES LONGER LIFE than normal metal cutting hole cutters.
  • Our Tungsten Carbide Tipped Cutters are a superior alternative to conventional Bi-Metal Hole saws. They cut faster, cleaner, and last longer..
  • Tungsten cutters cut through, steel plate, iron, aluminium, copper, cast iron, and most importantly, stainless steel and other tough alloys..
  • The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
  • With normal care, tool life is significantly longer than other hole cutting tools. Inexpensive resharpening will allow repeated use.
Check Stock

GJHL Drill 2-3/8 Inch 60mm Hole Saw, 1-1/4 Inch Cutting Depth HSS Bi-Metal Hole Cutter with Hex Shank Drill Bit Adapter Durable

  • 10 TIMES LONGER LIFE than normal metal cutting hole cutters.
  • Our Tungsten Carbide Tipped Cutters are a superior alternative to conventional Bi-Metal Hole saws. They cut faster, cleaner, and last longer..
  • Tungsten cutters cut through, steel plate, iron, aluminium, copper, cast iron, and most importantly, stainless steel and other tough alloys..
  • The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
  • With normal care, tool life is significantly longer than other hole cutting tools. Inexpensive resharpening will allow repeated use.
Check Stock

WICHEMI 10PCS TCT Hole Saw Kit Tungsten Carbide Tipped Hole Cutter Set Heavy Duty Hole Saw Hole Cutting Drill Bit for Stainless Steel Copper Iron Aluminum Iron Metal Plate 5/8\ to 2-1/8\ inch

  • ...8”), 22mm(7/8”), 25mm(1”), 28mm(1-3/32”), 35mm(1-3/8”), 38mm(1-1/2”), 45mm(1-3/4”), 50mm(2”), 53mm(2-1/8”). The package contains 10pcs pilot drill bits and 2pcs L-shaped hexagon wrench. A variety of sizes to meet your different needs..
  • 【Premium Material】- This hole saw is made from high quality tungsten carbide tipped cutters, ensures its high hardness, rust proof and wear resistance. Designed with precision ground, sharp tough gears and stepped pilot drill bit to drilling more precise, smooth, faster and safer, leave perfect cutting results..
  • 【Fast Cutting Speed】- The spring-type guide drill can eject the chips to make the cutter body cut clean and smooth, which not only saves cleaning time, but also shortens the cutting time. The speed of burr-free holes is faster than that of traditional twist drills or other hole saws, and has a greater advantage in cutting time..
  • 【Multipurpose Tools】TCT Drill Bit sets cut quick, precise holes in 28MM thickness metal material, they are industrial grade metal drilling hole cutter for stainless steel, mild steel, alloy steel, iron,copper, aluminum, castings, plastic and brass..
  • 【Wide Application】: TCT Carbide Steel teeth for fast cutting of clean and smooth round holes. The carbide hol....
Check Stock

Dremel 9901 Tungsten Carbide Cutter

  • The product is Tungsten Carbide cutter 1/8″ Diameter with 1/8″ Shank.
Check Stock

HLOFIZI 2-1/2 Inch Carbide Grit Hole Saw Diameter 2.5\ Cutting Through Stucco, Brick, Plaster, Cement Board, Drywall, Hardie Board, Hardwood, PVC with 1-1/2\ Depth, Up to 6X Faster

  • 2.5” hole saw constructed with long-lasting tungsten carbide grit edge, easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Drilling holes through lots of abrasive materials, stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: 7/16" shank, fit 1/2" chuck.
  • Not recommended for cutting metal sheet, concrete block, cement tile.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 2-1/2” carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 3/4 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Steel, Iron, Wood, Plastic

  • 【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • 【Size】Cutting diameter：3/4Inch, Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..
Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 4 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic

  • 【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • 【Size】Cutting diameter：4 Inch (100mm), Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..
Check Stock

Makita 2 Pack 8 Pc - 3 1 4 Planer Blade Double Edge Set For Planers - Cutting For Hard Wood - 3-1/4\ Tungsten Carbide | 2-Piece Blade

  • 3-1/4-Inch Industrial Tungsten Carbide Hand Planer Blades.
  • Toughest, most durable planer blade available.
  • Lasts up to 30% longer than standard tungsten carbide blades.
  • 10% sharper than standard carbide blades.
Check Stock