ReviewsTungsten Carbide Saw Tips

10pcs SDS Plus Concrete Hole Saw Kit Extension Shank Mansonry Cement Wall Drill Bit TCT Core Drill Set Tungsten Hole Cutter for Drilling Brick Concrete Cement Stone

  • [What You Will Get]: 35mm, 40mm, 50mm, 65mm, 82mm and 110mm core drill bits, SDS+ arbors, pilot drills and a 300mm SDS+ extension shank.
  • [Tungsten Carbide Tip Drill]: This top-of-the-line TCT (tungsten carbide tip) core set offers faster cutting speeds and longer service life, making....
  • [Technical Application]: 35mm-45mm hole saw extension concrete cement wall drill bit for drilling water pipe and heating pipe, 55mm-80mm drill for air....
  • [Durable Material]: This sds plus extension shank hole saw drill bits for concrete cement is very solid, using high-quality alloy welding, for the....
  • [Widely Used]: This masonry hole saw kit easily drills holes on common wall materials, such as brick, adobe, concrete, cement, and stone, widely used....
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

  • ✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

Gunpla 4-1/2-inch 40 Tooth Alloy Steel TCT General Purpose Hard & Soft Wood Cutting Saw Blade with 7/8-inch Arbor(Reduce Ring 5/8 inch)

  • DURABLE MATERIAL: Gunpla circular saw blades are made of durable premium alloy steel material, with hardened and sharper tungsten carbide teeth for effective woodworking..
  • HIGH SPEED CUTTING SAW: Experience great cutting performance with this wood cutter. The saw blades ensure fast and accurate cutting with impressive results..
  • SMOOTH CUTTING: Sharp saw blade cutters, with thin kerf to provide smooth cuts. The saw blades can be used with Circular Saw, Miter Saw, Table Saw, Radial Arm Saw, and more..
  • APPLICATION: Perfect choice for a circular saw, miter saw, table saw when one is needed for ripping and crosscutting. MAX RPM up to 13,200..
  • Arbor size:7/8inch(22.23mm) with reduce ring 5/8inch(16mm).
  • Carbide Teeth: 40. Computer-balanced plate reduces vibration for improved accuracy and better finish..
Check Stock

Gunpla 3 Pieces 4-1/2-inch 40 Tooth Alloy Steel TCT General Purpose Hard & Soft Wood Cutting Saw Blade with 7/8-inch Arbor(Reduce Ring 5/8 inch)

  • DURABLE MATERIAL: Gunpla circular saw blades are made of durable premium alloy steel material, with hardened and sharper tungsten carbide teeth for effective woodworking..
  • HIGH SPEED CUTTING SAW: Experience great cutting performance with this wood cutter. The saw blades ensure fast and accurate cutting with impressive results..
  • SMOOTH CUTTING: Sharp saw blade cutters, with thin kerf to provide smooth cuts. The saw blades can be used with Circular Saw, Miter Saw, Table Saw, Radial Arm Saw, and more..
  • APPLICATION: Perfect choice for a circular saw, miter saw, table saw when one is needed for ripping and crosscutting. MAX RPM up to 13,200..
  • Arbor size:7/8inch(22.23mm) with reduce ring 5/8inch(16mm).
  • Carbide Teeth: 40. Computer-balanced plate reduces vibration for improved accuracy and better finish..
Check Stock

LENOX Tools Hole Saw, Carbide, 4-1/8-Inch (2996666CG)

  • Features a hard tungsten carbide grit cutting edge.
  • It will cut tough abrasive materials such as fiberglass, ceramic tile, laminates.
  • Carbide grit edge will not snag or chip when cutting thin materials.
Check Stock

Rocaris 13Pcs 16mm-53mm Stainless Steel Carbide Tip Metal Drill Bit Hole Saw Set

  • 【Innovative three-blade design】Designed as Three-blade for layered cutting, the Hole Saw Kit for Metal can make the cutting resistance smaller and....
  • 【Top Quality】Made of YG8 tungsten carbide steel, the Titanium-plated cemented carbide Tooth are sharp, anti-rust and durable.Ideal for hand held....
  • 【Fast Cutting】The teeth of metal hole saw kit are designed as front and rear low top tooth profile and Three-blade, which make it more efficient....
  • 【Multipurpose Tools】The carbide hole saw set are widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP,....
  • 【13 Different Size】Outside diameter Size: 16mm, 18mm, 20mm, 22mm, 25mm,26mm,28mm, 30mm, 35mm, 40mm,45mm, 50mm, 53mm.Wood can be drilled about 20mm....
Check Stock

Disston E0104578 1-1/4-Inch RemGrit Carbide Grit Arbored Hole Saws 32mm

  • Cutting edge of tungsten carbide particles bonded to alloy steel back.
  • High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting.
Check Stock

VEVOR Band Saw Blade, 65x0.6x0.02 inch, 5 PCS/Pack Meat Bandsaw Blades for Replacement, 65Mn Carbon Steel Blade, 3 TPI Meat Cutting Blade Wrapped by Rust-Proof Paper, for Commercial Bone Saw Machines

  • Tougher tungsten carbide stays sharper longer.
  • Thin kerf for fast and smooth cutting action and The arbor size is 5/8”..
  • Computer-balanced plate reduces vibration for improved accuracy and better finish.
  • Durable tungsten carbide maintains a true edge.
  • Best used for miter saw and slide miter saw jobs.
Check Stock

REETAI-FOUR 10Pcs TCT Hole Saw Kit,Tungsten Carbide Tipped Hole Saw Set, Hole Cutter Heavy Duty for Stainless Steel.(5/8\-2-1/8”)

  • ...cs hole cutters with dimensions 16mm(5/8"), 18mm(11/16"), 20mm(3/4"), 22mm(7/8"), 25mm(1"), 30mm(1-1/8"), 35mm(1-3/8"), 45mm(1-3/4"), 50mm(2"), 53mm(2-1/8"),10 pcs pilot drill bits and 1 pc hex key.A variety of sizes to meet your different needs..
  • 【High Quality Material】：This hole saw is made from high quality Tungsten Carbide Tipped Cutters, ensures its high hardness, rust proof and sturdy.The high-end tungsten carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • [Application]: These Hole Saw Sets provide fast and precise cuts into 28MM thickness metal material, they are Industrial grade metal drilling hole cutter for stainless steel, metal, iron. It is also suitable for plastic, aluminum, FRP, etc. Remember to add coolant during continuous high-speed drilling..
  • 【Easy to Use】: TCT Carbide Steel teeth for fast cutting of clean and smooth round holes. They are suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • 【Sincere Service】: Drill bit, spring, wrench are included, which make your job more convenient and easier.The pilot drill bit is detachable.If you have any question about ....
Check Stock

TCT Hole Saw Set, 16-53mm Tungsten Carbide Tipped Hole, 13 Pcs Carbide Hole Saw Kit with Titanium Plated Pilot Drill Bit for Stainless Steel, Metal, Iron, Wood and Aluminum

  • Safe & Durable: This carbide hole saw set uses variable teeth technology with 3 distinct cutting edge to balance the cutting and make the blades more durable, sharp and more efficient for cutting hard metal..
  • Fasting Cutting: Carbide technology and optimized tooth geometry make hole cutter cut fast in most applications. This carbide hole cutter can precisely cut very smooth holes due to the concentricity rate..
  • Wide Application: 1/2 inch cutting depth makes this stainless steel hole cutter easy to pass through thick material such as: thick metal, stainless steel, iron pipes, aluminum, brass and sheet metal plate..
  • QUALITY MATERIAL: Our hole saw set are Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), Top-grade Titanium-plated cemented carbide Teeth ensures its high hardness, rust proof, sturdy and durable..
  • PACKAGE INCLUDES: The package includes 13 Pcs carbide hole saw: 16mm(5/8”), 18mm(45/64”), 20mm(25/32”), 22mm(55/64”), 25mm(63/64”), 26mm(1-1/32”) 28mm(1-7/64”), 30mm(1-3/16”), 35mm(1-3/8”), 40mm(1-37/64”), 45mm(1-49/64”), 50mm(1-31/32”), 53mm(2-3/32”). A variety of sizes to meet your different needs..
Check Stock

Marshalltown Straight Tile Nipper

  • MARSHALLTOWN Straight tile nippers are great for small, curved or irregular nipping of ceramic or porcelain tiles..
  • The adjustment knob controls how far nippers open, with stops for closed, 1/4 Inch tile, 1/2 Inch tile and fully open, to help reduce hand fatigue..
  • All MARSHALLTOWN Tile Nippers and Cutters have pre-set locking capabilities, a durable die-cast aluminum body, replaceable tungsten-carbide tips/wheels, and comfortable DuraSoft handles..
  • The Wheeled Nippers include Replaceable, tungsten-carbide tips and wheels, Internal torsion springs that help prevent damaged or lost springs and an Aluminum die cast body that provides lightweight durability..
Check Stock