TIG Welding Tungsten Electrodes 2% Lanthanated Blue WL20 10-Pack 1/16
- PERFECT for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and stainless steel.
ReviewsTungsten Copper Alloys
2/Pack Solid Carbide Drill Bit for Hardened Steel Hard Ness HRa 91.3 Aerospace Standard K20 Tungsten Carbide Jobber Length Twist Drill for Metal 118 Degree Four Facet Point Fractional Size (5/32″)
- ★【Premium Bright Finish 2/Pack】 multi-purpose solid carbide drill bits provide better rigidity than high speed steel bits. It is extremely heat resistant and used for high speed applications. Our tungsten carbide (WC) bits has the advantage of cutting metal either “wet” or “dry” and they provide solutions for many businesses such as aerospace drilling jobs for aircraft mechanics, precision machining, hobby supply, etc..
- ★【Recommended For Use On】 aircraft metals chrome titanium inconel stainless steel Alloys Steel Low-Medium-High Carbon Steel Aluminum Copper Glass Plastics Composite Materials Cast Iron — Our Carbide drills stay sharp many times longer than traditional steel bits making them ideal for the toughest of applications!.
- ★【Optimal Design for Metal Work】 118° four facet point angle minimizes drill wander and assures accurately sized holes. Our jobber length, precision ground carbide drills are designed for high feed rates with good chip disposal. smooth finish on the bits increases chip flow. Spiral flutes are constructed with a higher flute angle to remove chips more easily..
- ★【Specs】 Flute Length: 1-3/8 inch, Overall Length: 2-1/2 inch, Drill Size: 5/32 inch // Tungsten Carbide Grade (ISO): K20 // Binder: %8 ....
2/Pack Solid Carbide Drill Bit for Hardened Steel Hard Ness HRa 91.3 Aerospace Standard K20 Tungsten Carbide Jobber Length Twist Drill for Metal 118 Degree Four Facet Point Fractional Size (3/16")
- ★【Premium Bright Finish】 multi-purpose solid carbide drill bits provide better rigidity than high speed steel bits. It is extremely heat resistant and used for high speed applications. Our tungsten carbide (WC) bits has the advantage of cutting metal either "wet" or "dry" and they provide solutions for many businesses such as aerospace drilling jobs for aircraft mechanics, precision machining, hobby supply, etc..
- ★【Recommended For Use On】 aircraft metals chrome titanium inconel stainless steel Alloys Steel Low-Medium-High Carbon Steel Aluminum Copper Glass Plastics Composite Materials Cast Iron -- Our Carbide drills stay sharp many times longer than traditional steel bits making them ideal for the toughest of applications!.
- ★【Optimal Design for Metal Work】 118° four facet point angle minimizes drill wander and assures accurately sized holes. Our jobber length, precision ground carbide drills are designed for high feed rates with good chip disposal. smooth finish on the bits increases chip flow. Spiral flutes are constructed with a higher flute angle to remove chips more easily..
uxcell 1.75mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs
- Specification: Diameter: 1.75mm / 0.07″.
- Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC.
- Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc..
- For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
- Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle.
- Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.
uxcell 3.25mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs
- Specification: Diameter: 3.25mm / 0.13″.
- Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC.
- Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc..
- For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
- Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle.
- Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.
GOONSDS Tungsten Filament 99% Purity Tungsten Metal Wire Coil,Length 1m,Diameter 0.04mm
- Purity: W ≥ 99% . Dimensions: diameter:0.04-0.1mm(Buy on demand) , length:1m. Package: 1 x Tungsten wire.
- Tungsten and its alloys are widely used in electronics and power industry because of its strong plasticity, low evaporation rate, high melting point and strong electron emission ability. For example, due to its high luminous efficiency and long service life, tungsten filament is widely used in the manufacture of various bulb filaments, such as incandescent lamp, iodine tungsten lamp, etc,.
- Tungsten wire is used to make direct hot cathode and grid of electronic oscillator tube and side hot cathode heater in various electronic instruments. The properties of tungsten make it suitable for TIG welding and other electrode materials similar to this kind of work..
- It is widely used in aerospace, aviation, oil drilling, electrical instrument and other industries, such as manufacturing heat sink, balance weight of control rudder and contact materials of switch, circuit breaker, spot welding electrode, etc..
- We are a supplier of high quality metal materials. We can provide you with the materials you need. You can contact us to get any materials you need.
Wokesi 6mm Blade Diameter,6mm Shank,50mm Overall Length,Solid Tungsten Carbide,HRC55,Uncoated,2Flute,Straight Shank,90 Degree Point Angle,NC Spotting Drill Bit Chamfering Cutter(6mm Uncoated)
- Material:solid tungsten steel,Long tool life..
- Most suitable for copper,iron,aluminium alloys,titanium alloy,mold steels under 55HRC(HRA78).etc..
- NC drill of diameter over the drilling,centering and chamfering are obtained in a single operation..
Wkstool Φ6mm,Micro Solid Carbide Drill Bits,Straight Shank,TiAlN Coated,Metric,for Stainless Steel,Alloy and Hard Steel (Ø6mm -30mm Flute Length-60mm Full Length, for Steel)
- T.I.R.(Total Indicator Reading):Maximum 10um(0.01mm).
- Made of Solid Micro carbide(Tungsten Steel,HRC55),High quality TiAlN coating,getting long tool life..
- Suitable for profiling Alloys,Aluminium,Copper,Stainless steel,Iron and Hard steel....
- High hardness,High Performance.Good surface roughness.can be high-speed machine processing..
ACCUCUT I2DMS 2 Flute 3/8 Carbide End Mill Multi-Function for Deburring Spotting Chamfering & Side Milling 90 Degree bits AlTiN Coating
- ...ble with copper, copper alloys, alumiumn and alumiumn alloy, woodworking, cast iron, steels, carbon steels, alloy steels and stainless steel materials. Best use for materials HRC less than 40..
- Solide Carbide: The material is European origin ultra fine grain carbide. The carbide rod we choose is made with the finest tungsten carbide powder and cobalt, using the best ratio to achieve the most ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible..
- AlTiN Coating: It is a strong coating that's coated at temperatures between 450°C to 475°C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced..
- Versatile Design: This end mill is designed for multiple purposes, such as chamfering, spotting, deburring and side milling. The chamfer degree is 45 per side..
- 35° Helix: 2 flute and 35 degree helix design is ideal for roughing application because of its greater strength and cap....
Plasma Cutter TIG Welder Pulse Stick Welder - CT418 3 in 1 Combo Welding Machine 180A Pulse TIG/Arc Welding 40A Plasma Cutting 110/220V Dual Voltage Digital Display Portable Welder Machine
- ❆ PULSE TIG Welder: 10-180A Pulse TIG Welder Electric Current Output @ 220V. Quality TIG welding on stainless steel, nickel alloys, copper, brass and bronze etc. The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life..
- ❆ Stick/ARC Welder: 10-160amp output current @220V. Easy arc start, stable welding arc.
- Deep weld pool and beautiful welding shape..
- ❆ What You Get: Our worry-free 12-month warranty, and friendly customer service. The CT-418 machine comes with a PT-31 cutting torch, TIG-17FV torch for tig welding. You also get stick holder, earth clamp, power cable, air hose, and torch consumables..
Bernzomatic PC3 Copper-Phosphorous Brazing/Welding Rods, 3-Piece
- Copper-phosphorous brazing/welding rods ideal for use in refrigeration, electrical and plumbing jobs.
- Working temp: 1,310-1,475-Degree farenheit.
- Joins copper to copper without flux, or copper to copper alloys (brass, and bronze).