ReviewsTungsten Steel Boring Bars

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
For semi-finishing and finishing operations.

...R06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
The cemented carbide material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
cutting angle is 95 degree, cutting direction is right hand.
Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
Note: due to the slight color change of manual measurement and different display settings, p....

Dual-Tungsten Weights - For the first time, we’ve implemented heavy tungsten stability bars (172g total) that strategically wrap around the back and side of the putter for optimal forgiveness and stability..
Pure Roll² Insert - The new firmer co-molded insert, manufactured of black TPU urethane with silver aluminum beams at a 45° angle designed to improve topspin across the face..
Fluted Feel - A newly engineered stability putter shaft with a softer section located 5” from the tip, intently designed to enhance feel, increase stability and improve dispersion..

Dual-Tungsten Weight - For the first time, we’ve implemented heavy tungsten stability bars (172g total) that strategically wrap around the back and side of the putter for optimal forgiveness and stability..
Pure Roll² Insert - The new firmer co-molded insert, manufactured of black TPU urethane with silver aluminum beams at a 45° angle designed to improve topspin across the face..
Fluted Feel - A newly engineered stability putter shaft with a softer section located 5” from the tip, intently designed to enhance feel, increase stability and improve dispersion..

Dual-Tungsten Weights – For the first time, we’ve implemented heavy tungsten stability bars (172g total) that strategically wrap around the back and side of the putter for optimal forgiveness and stability..
Pure Roll² Insert – The new firmer co-molded insert, manufactured of black TPU urethane with silver aluminum beams at a 45° angle designed to improve topspin across the face..
Fluted Feel – A newly engineered stability putter shaft with a softer section located 5” from the tip, intently designed to enhance feel, increase stability and improve dispersion..

3/4", .75in Round Shank, 90 Degree, Indexable Boring Bar Set, allowing the operator to set positive or negative rake.
Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert.
It is not necessary to remove tool from chuck or tool post.
Positive Rake 90Degree Lead, Uses 0.050" key, C6 grade: carbide for steel and alloy steel.
1/4" I.C. carbide inserts fit all bars, Radius = 0.015", Key = T8, Shank: 3/4", Piece per set: 8.

Turning tool holders material: 40Cr-42CrMo steel.
5/8" (16mm) shank. Indexable Inserts material: tungsten carbide. Stable and durable..
Surface treatment: Quenching and Hardening..
Model of 7 pieces turning tool holders: S16Q-SCLCR09, SCLCR1616H09, SDJCR1616H11, SDNCN1616H11, SNR0016Q16, SER1616H16, MGEHR1616-3. Model of 7 pieces applicable inserts: CCMT09T304, DCMT11T304, 16IR AG60, 16ER AG60, MGMN300..
Suitable for: CNC lathe Internal and external turning, boring, threading, grooving, cutting, etc..
Packing includes: 7 pieces turning holders, 7 pieces carbide inserts, and 7 pieces wrenches..

1. Model : MGIVR2016-2 Right hand Internal Grooving holder / Boring bars.
2. Inserts applied: MGMN200-G (Grooving inserts).Inserts with Nano coating endow them strong impact resistance, good versatility with high precision, high finish and high wear resistance..
3. Shank Diameter: 5/8" inch / 16*16mm, Overall length: 180mm/7.08" , Groove width: MGMN200.
5. Advantage: Suitable for hard steel and stainless steel parts processing. High hardness, good toughness, good wear resistance, heat resistance. Imported base material, high-quality coating.
4. Package includes: 1Pc of MGIVR2016-2 Tool-holder +1PC MGMN200-G Colorful coating insert + Wrench : L.

Tungsten steel rhombus pendant chain for men and boys, mirror finished, simple and clean, less but better, goes with almost any outfits by a chic dose of low-key gorgeous.
Material: tungsten carbide, tungsten steel is known for its super hardness & flawless quality, the hardness is about 4 times over titanium steel, great material for long lasting jewelry without any fading or scratches. The density is about 1.5 times over titanium steel, it makes the small pendant having a good weight to it. Hypoallergenic and outstanding tarnish resistance. Cool touch of tungsten is comforting and calming.
Small yet solid pendant, measurements: Height 1.

Pacake includs: 20pcs DCMT Inserts (5pcs brozun DCMT32.51 +5pcs yellow DCMT32.51 +5pcs brozun DCMT32.52 +5pcs yellow DCMT32.52).
55° Diamond shaped single sided TIAIN coating carbide turning inserts , mainly used for steel, stainless steel finishing, semi-finishing and rough machining..
DCMT32.51--Relief Angle : 0.4, DCMT32.52--Relief Angle : 0.8, Cutting angle: 55°, Blade length:11mm, 5/32" Thickness ,1/64" Radius, With chipbreaker.
With continuous processing function, Used for turning and finishing on a wide range of materials.
Macthing for SDJCR11 /SDXCR11 tool holders /boring bars.