ReviewsTungsten Steel Mills Tools

Hurricane Turning Tools, HSS, 3 Piece Bowl Gouge Set (1/4\

...uck and insert the wood lathe tools,then screw on the collet and you can immediately go to work,the whole process takes five seconds.The wood turning tools for lathe screw self-locking collet fits snugly into the top thread,so you can experience visible robustness..
【HIGH CUTTING EFFICIENCY】 - Sharp high-density tungsten wood lathe cutting edge allows you to handle any wood lightly,and is more durable than other typical carbon and high-speed steel material wood turning tools.It is less likely to deform and stick during cutting,and if the cutting edge becomes dull,simply change the direction of the cutting edge with the included T15 wrench and you will have a fresh,clean cutting edge again..
【EASY TO CONTROL】 - Whether pure aluminum solid handle,or the tool bar of high-speed steel material,mirror polishing treatment to ensure that you can move on the frame without obstacles,square axis wood lathe tools and the tool frame contact is not easy to roll,1.15 pounds of solid aluminum bar handle to minimize the phenomenon of warping,the handle of the frosted sense of control more to let you handle any product details with ease..
【LONG SERVICE LIFE】 - Weighing 1.15 pounds of solid aluminum bar handle,high-density tungsten carbide cutting head,high-sp....

Check Stock

Thread Mills Exercise Equipment for Home Use Porta 3.175mm Shank Single Flute Spiral Milling Cutter 10pcs Titanium Coated Carbide End Mill CNC Router Bit Engraving Milling Cutter

Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
hex shank High Speed Steel screw spiral point thread metric plug drill bits， Have sufficient bending strength and wear resistance..
Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc..
1. These CNC end mills are made from high quality material of tungsten steel.
2. Wear-resisting and Not easy to stick milling cutter.

Check Stock

Carbide Boring Bar, Boring Bar Holders Small Bore Inner Hole Turning Tool Tungsten Steel Carbide Boring Bar Φ12mm SHB25‑12

❤Stable: High accuracy, good clamping capability and stable retaining, can insure stable working of boring tool..
❤Design: Practical accessories of lathe inner diameter tools and small diameter CNC special tool..
❤Model SHB25‑12: Model SHB25‑12, means that the outer diameter is 25mm/0.98in, and the clamp boring tool diameter is 12mm/0.47in..
❤Tungsten steel: Manufactured from premium tungsten steel material, has high hardness, not easy to damage and corrosion..
❤Easy to operate: Fine workmanship, compact and lightweight lathes tools, easy to operate..

Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock

Ohto MF-20K3B Multi-Pen Hexagon Barrel Knurled Grip 3 Points Matte Black

Knurled aluminum handle provides maximum control and comfort with exquisite craftsmanship..
Scribing pen comes with a convenient pocket clip as a special hand tools for ceramic marking..
The tungsten carbide tip is marked with hard materials including hardened steel, stainless steel, ceramic and glass..
Permanent magnets pick up small parts and retrieve steel shavings from hard-to-reach places..
Hard and sharper tungsten carbide tip can form precise lines and characters on almost all metals..

Check Stock

YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock

YUFUTOL Carbide Tipped Wood Turning tools Lathe set （Finisher/Rougher/Detailer/Hollower Swan Neck Hollower with Solid Wood Handle）and Diamond/Round/Square Carbide Inserts

【Upgraded Carbide Turning Tools Material】High-density tungsten carbide blades are made with high-speed steel blade material which will not wear off easily, stainless steel aluminum handles and a beautiful aluminum alloy case with sponge liner, excellent ergonomics and reliable grip, increased stability and shock resistance.
【Adjustable Aluminum Handle Length】You can freely adjust the length of wood turning tools for lathe according to your preference, just fasten the two screws of the lathe turning tools with the accessory wrench then you can work which is convenient and flexible.
【Replaceable Carbide Blade&Adjustable Sharpe Edges】Our carbide lathe tools matching carbide blades can be replaceable and we provide you with new cutting inserts and maximize cutting life. Each lathe chisel has a tungsten carbide tip with a rotatable, sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge.
【Carbide Lathe Tools Package】You will get 11" tool handle*1, 9.8" connected handle extension*1, 9.8"round turning tool*1, 9.8"diamond turning tool*1, 9.8"square turning tool*1, 9.8"r-shape turning tool*1, interchangeable carbide inserts*8, T15 wrench*1, allen wrench*1,screw*2, aluminum protective case with high elasti....

Check Stock

Wood's Powr-Grip G609 3-1/4\ Concave Grifter Suction Cup

Suitable for processing high-hard parts such as stainless steel, mold steel, heat-treated steel.
Suitable for CNC machine tools and machining centers, not for key machines, general machine tools, etc..
Suitable for finishing, not suitable for roughing.
Made of tungsten steel material, coated on the surface, not easy to damage.
The product has ability to cut workpieces with hardness below HRC65°.

Check Stock

Carbide Burr Set, Tinpec Double Cut Cutting Burrs with 1/8\ Shank & 1/4\ Head, Tungsten Steel Die Grinder Bits for Woodworking, Drilling, Metal Carving, Engraving & Polishing – 10PCS

✔【DIE GRINDER Cutting Burrs】: Carbide burrs casted from Tungsten Steel with amazing HRA003e85. Cutting Burr Demensions: Length:45-50mm, Diameter 1/4'', Shank Length 35mm, Shank Diameter 1/8''..
✔【SHARP DOUBLE CUT】: With grooves evenly crossed, Tinpec double cut cutting burrs are 2x sharper and faster, perfect for all materials like wood, plastic, steel, stone, ceramic and aluminum..
✔【1/8” Shank】: With widely adopted 1/8” shank, Tinpec carbide burrs are compatible with most handheld electric or air powered tools, also in machine tools. Fast and smooth centering with the three jaw chuck..
✔【LONG SERVICE LIFE】: Thanks to our hardened Tungsten Steel and superb tech, Tinpec die grinder bits are 10x more lasting than high-speed steel and 200x than grinding wheel..
✔【PROJECT HELPER】A clear storage case comes with the carbide burr set for easier storage and access. A smart choice for your DIY, engraving, polishing, woodworking and carving projects..

Check Stock

Carbide Burr Set Tungsten Carbide Burr Rotary - ORAPXI 20pcs 1/8\ Shank Double & Single Cut with 3mm Cutting Head Diameter Fits Most Rotary Drill Die Grinder for Engraving, Carving and Drilling

【Double & Single cut】10 for each of the double cut and single cut. Double-cut is suitable for plastic, wood, aluminum, etc. Single cut for hard material, such as iron, steel and so on. The 20pcs rotary burr bits set includes various types of burrs with assorted shapes to meet your different drilling needs..
【Fit for most rotary tools】With 1/8"(3mm) Shank, Solid tungsten rotary tool bits - Accessories for Dremel, Fordom, Dewalt, Milwaukee and Die Grinders..
【Professional tools】This is an essential carbide rotary burr toolkit for woodworking and engraving enthusiasts. These tools are used clean welds or metal processing, which can effectively reduce labor intensity and improve work efficiency..
【Premium Material】Made of high quality tungsten steel, processing hardness up to HRA≥85. This grinding head is easy to use..
【Widely usage】ORAPXI carbide burrs can be used on all kinds of metal and metalloid, including quenched steel, marble, jade and bone, metalwork, tool making, model engineering, wood carving, jewelry making, welding, chamfering, casting, deburring, grinding and sculpting..

Check Stock