ReviewsTurbine Bearing Oil

4 PCS 3D Printer Blower Cooling Fan, 5015 Cooling Fan 50mm x 50mm x 15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal(12V 0.18A)

  • Low noise while cooling the hot end of heatsinks..
  • ✹✹ DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for cooling heatsinks on hot ends, prints, or other cooling needs..
  • ✹✹ Easy to cool the filament that is deposited on your print. Cooling your print can make the difference between a beautiful print and a failed print..
  • ✹✹ Size:50mm*50mm*15mm(L*D*H), Speed:6500±10%RPM, Noise:25dBA, Bearing: oil, DC 12V, 0.18A..
  • ✹✹ Note: New & Old Version is shipped randomly.(Any questions, you can contact us and we will give you a satisfied solution!)..
Check Stock

Appion G5TWIN Twin Cylinder Recovery Unit, 3 liters

  • Compact and lightweight: Weighs only 24 lbs..
  • Twin Cylinders and Twin Condensers for ultra fast recovery.
  • Refrigerant-Isolated Crankcase, eliminating bearing contamination.
  • 7-inch 10-blade turbine fan @ 3000 rpm blasts 600 cfm of cooling air over the twin heads and condensers.
Check Stock

Dyna-Living Wind Turbine Generator 400W DC 12V 3 Blade Wind Turbine Motor with Charge Controller for Home Use Boat or Industrial Energy(Not Included Mast)

  • [Low Noise and Durable]- The wind turbine motor adopts a three-phase DC permanent magnet synchronous generator, free running, low noise and long service life. Teflon wire is heat resistant, which is not easy to damage the wire when the machine is overloaded. It is smooth in operation, good wind resistance for double-row bearing..
  • [High Wind Energy Utilization]-The coil is made of Teflon wire, which is resistant to high temperatures. It has effective regulation of current and voltage, with high wind energy utilization factor, which contributes to the annual energy output..
  • [High-Quality Blades]-The blade is equipped with a copper inlay part that does not damage the nylon fiber when the bolt is tightened, the blades are not easily deformed or broken. The working temperature is -40 ° C ~ 80 ° C, do not worry about the temperature being too low and causing the leaves to freeze..
  • [Unique Design]- The wind turbine generator adopts a permanent magnet rotor alternator and with a special kind of stator design, efficiently decreases resistance torque guarantees stability. The blades using reinforced glass fiber helped with optimized structure and aerodynamic shape, it enhanced wind power coefficient and power generating capacity..
Check Stock

Wolf Tooth Components Remote 22.2mm Handlebar Clamp Dropper Lever

  • Universal ReMote Dropper Lever, mounts on handlebars, Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation..
  • The dropper cable is attached at the lever and has an intgrated barrel adjuster to make setup and adjustment quick and easy..
  • Compatible with all cable actuated dropper posts. Compatible with 9point8, Bike Yoke Revive, Bontrager, DVO Garnet, Easton Haven, Fox Transfer, Giant Contact, Gravity Dropper, KS, PNW, OneUp, Race Face Turbine, Shimano Koryak, Specialized, Thomson, TransX and more..
  • Low-Profile lever and the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive, easy to install, and readily available.
Check Stock

Wolf Tooth Components Remote LA for 22.2mm Handlebar Clamp

  • Universal ReMote Dropper Lever, mounts on handlebars, Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation..
  • The dropper cable is attached at the lever and has an intgrated barrel adjuster to make setup and adjustment quick and easy..
  • Compatible with all cable actuated dropper posts. Compatible with 9point8, Bike Yoke Revive, Bontrager, DVO Garnet, Easton Haven, Fox Transfer, Giant Contact, Gravity Dropper, KS, PNW, OneUp, Race Face Turbine, Shimano Koryak, Specialized, Thomson, TransX and more..
  • Low-Profile lever and the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive, easy to install, and readily available.
Check Stock

MX8 Elite/MX6 Elite, MX8/MX6 Pool Cleaner Tune-Up Kit Includes 2 Tire Track R0526100, 2 Engine Bearing R0527000, 4 Cyclonic Scrubbing Brush R0714400 Replacement For Zodiac MX8 MX6 Elite Pool Cleaners

  • Compatible with Zodiac MX8 Elite and MX6 Elite model pool cleaners..
  • The engine bearing R0527000 and Tire Track R0526100 also fit MX8/MX6 models pool cleaners..
  • The Cyclonic Scrubbing Brush R0714400 fits MX8/MX6 ONLY if you replace Cyclonic Turbine R0525000 with Cyclonic Scrubbing Turbine R0714300 ***.
  • Package included: 2 engine bearings R0527000, 2 Tire Track R0526100 , and 4 Cyclonic Scrubbing Brush R0714400.
Check Stock

FINDAUTO Turbo Turbocharger Gaskets Fit for 2013-2021 for Buick for Encore 2011-2019 for Chevrolet Cruze 2016 for Chevrolet Cruze Limited 2012-2020 for Chevrolet Sonic 2013-2021 for Chevrolet Trax

  • Fits Following Vehicles - 2013 2014 2015 2016 2017 2018 2019 2020 2021 for Buick for Encore 2011 2012 2013 2014 2015 2016 2017 2018 2019 for Chevrolet....
  • Turbo Features - Floating bearing type Gary iron bearing housing Rotor dynamic balance process.
  • When To Replace - The performance of the supercharger is reduced the compressor or turbine blade is damaged or the noise generated when the turbo....
  • Properly Fit - Tested before leaving the factory.Direct replacement for the factory assembly.
Check Stock

Appion G1SINGLE Refrigerant Recovery Machine 115 Vac 60 Hz 10 Amp 10.3 Height 9.4 Width 11.38 Length

  • Refrigerant-Isolated Crankcase, Eliminating Bearing Contamination.
  • 7-inch, 10-blade turbine fan blasting 600 cfm of cooling air.
  • Time-saving design: no throttling and no purge cycle required.
Check Stock

Pulsar Turbo Billet Compressor Wheel + Rebuild Kit Repair Kit Service Kit for 04.5-07 5.9L HE351CW Turbo

  • 5 Axis CNC milled, machined from Solid, make more aggressive blades design possible.Spool up faster, Lower EGTs and More Boost!.
  • 360 Degree Brass Thrust Bearing CNC machined from COOPER BAR.
  • Stepped gap seal rings on the compressor and turbine ends.
  • Suitable for 04.5-07 5.9 diesel Engine HE351CW Turbo.
Check Stock

STRENGTH TRAINING FOR SENIORS AT 60+: Simple Home Exercises to Reclaim Strength, Build Balance and Boost Confidence, Increase Energy In 7 Days

  • Compact and lightweight: Weighs only 24 lbs..
  • Twin Cylinders and Twin Condensers for ultra fast recovery.
  • Refrigerant-Isolated Crankcase, eliminating bearing contamination.
  • 7-inch 10-blade turbine fan @ 3000 rpm blasts 600 cfm of cooling air over the twin heads and condensers.
Check Stock

Tifosi Davos replacement lens (Clarion Blue)

  • ICON KIT INCLUDES: Interchangeable Oakley logo icons to change the look on Turbine or Turbine Rotor sunglasses..
  • COMPATIBLE WITH: Oakley Turbine or Turbine Rotor Sunglasses..
  • VISIT THE OAKLEY BRAND SHOP: Click on the Oakley logo above to view the entire Oakley sunglasses and accessories assortment..
Check Stock