ReviewsTurbine Wheel Shaft

QWinOut Carbon Fiber Magnetic Propeller Balancer Props Essential for DIY RC Quadcopter FPV Airplane Car Boat

  • The use of the N45 high performance magnet, fixed plate made of carbon fiber board material.
  • Maglev-method was adopted on the center fixing axis to balance the tested products with zero resistance.
  • Fixed-wing propeller, helicopter rotor the maglev propeller balancer suitable for any size and weight, marine propeller, car wheels, turbine blades,....
  • Fit 0-80g Fixed wing propeller,marine propeller,Car wheel hub,Turbine blade,etc(helicopter not available).
Check Stock

Dryer Blower Squirrel Cage Fan Wheel for Maytag Y-303836 3-12913

  • Dryer Blower Squirrel Cage Fan Wheel for Maytag Y-303836 3-12913.
  • This Bower Wheel / Squirrel Cage fits Maytag dryers..
  • Measurements: 7 1/2" Diameter and 3 1/8" deep also Fits 1/2" "D" shaft.
  • motor, 1/2" shaft diameter w/ a flat side on the shaft..
Check Stock

Pikasola Wind Turbine 200W max 220W 12V 5 Blade Wind Vertical Axis Generator 3 Phase AC Permanent Magnet Generator Wind Turbine Kit with Controller for Hybrid Wind Solar System

  • ... to blades be fixed inside by a flange, then not risk of blade falling off..
  • 2.（-High Wind Energy Utilization-）: Wind blades adopt reinforced fiber nylon which more durable and strong ability of Anti-wind. Especially with optimized aerodynamic shape and structural design, has a High wind energy utilization. Wind turbine can start by breeze and adapt to 360° wind, no yaw system is needed..
  • 3. (-Quietly-): The vertical wind turbine is quieter than horizontal axis turbine. Double bearings make it more stable and not easy to shake when wind generator is running. Silent rotation, suitable for home, boat, marine, monitoring use, solar and wind hybrid street lighting system..
  • 4. (-Excellent Generator-): Permanent magnet three-phase alternating current can reduce the resistance torque of wind generator effectively. Also make the wind wheel and the generator matching better and then running more reliability..
  • 5. (-Installation convenience-): Vertical axis wind turbine can use a screw pile foundation. It is a cost reduction and easy&quick installation compare with concrete foundation installation. Screw pile foundation can be fully recycled at the end of life. An environmentally friendly and low carbon emission way..
Check Stock

Pikasola 400W Wind Turbine Generator AC 12Volt Economy 3 Blades Windmill for Wind Solar Hybrid System 2.5m/s Start Wind Speed,400w Windmill Generator for Home

  • 1. Principle: horizontal shaft wind turbine generator, refers to the horizontal installation of shaft, parallel to the ground. The wind drives the blades to generate kinetic energy, which in turn drives the engine to generate electricity. Core components: blade + generator (engine) + rotating body + wind tail.
  • 2. Wind blade: 60cm in length, made of nylon carbon fiber. The longer the blades are, the more kinetic energy they generate and the more power they produce. Nylon material waterproof, corrosion resistant, lightweight, high efficiency..
  • 3. Generator: three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged. The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage.
  • 4. Rotating body: with yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle, with low starting speed and low vibration..
  • 5. Remarks: our products are designed through repeated experiments and tests, and the parameters ....
Check Stock

2Pairs ShareGoo Front & Rear Steel Drive Shaft Transmission Axle Compatible with Traxxas Slash 4X4 Nitro Rustler VXL Stampede 4X4 1/10 RC Car Truck Silver

  • The front and rear drive shaft compatible with Traxxas Slash 4X4 / Platinum / Ultimate / VXL 4x4 4WD Hoss 4X4 VXL Rustler 4X4 VXL Stampede 4X4 VXL....
  • The slash drive shaft are made of high quality steel material ,the hex wheel hub is made of aluminum alloy,durable in use..
  • Shaft Length Range:110mm-140mm/4.33''-5.51''.
  • Hex Wheel Hub Color:Blue/Silver(Optional).
  • Upgrades parts,designed for lasting performance,improves the overall performance of your rc car..
  • Package includes 2Pcs universal front drive shaft and 2Pcs rear drive shaft & 4Pcs wheel hex hub.The built-in anti-separtion design, reduce the....
Check Stock

T Sportline Tesla Wheel Touch Up Paint for Gunpowder Gray (Satin) 20” Model 3 Uberturbine/Sport/Zero G, 21” Model Y Uberturbine/Performance, 21” Model S Arachnid, 22” Model X Turbine Wheel/Rim

  • T Sportline Tesla Wheel Touch Up Paint - Gunpowder Gray (Satin / Matte).
  • Paint matches: 20" Model 3 Sport Wheel in Gray 20" Model 3 Uberturbine Wheel 20" Model 3 Uberturbine Performance Wheel 20" Model 3 Zero G Wheel 21" Model Y Uberturbine Wheel 21" Model Y Uberturbine Performance Wheel 21" Model S Arachnid (2021 - Present) Wheel 22" Model X Turbine (2021 - Present) All T Sportline Satin Gray Wheels.
  • Our T Sportline Wheel Touch Up paint is for touching up minor curbrash on T Sportline Tesla Wheels.
  • Disclaimer: Touch up paint is not a perfect match. If you are looking for a perfect match to your curb rashed wheel, we recommend a professional wheel repair specialist..
  • Please shake the bottle vigorously before use. Store in a cool, dry place away from direct sunlight..
Check Stock

CNBTR Yellow 3MM Hole Dia Brass Gear Shaft + 31MM OD 60 T Brass Gear Wheel 0.5 Modulus Set

  • Size 1: Brass Gear Wheel: 0.5 Modulus, 60T, Hole Diameter: 6mm/0.24inch. Size 2: Brass Gear Shaft: 0.5 Modulus, Outer Diameter: 9.7mm/0.38inch, Inner Diameter: 3mm/0.12inch..
  • The transmission structure of gear shaft is simple, compact, small volume and light weight. Easy to install and use..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • The item contains one 0.5 modulus 3mm hole dia brass gear shaft and one 60T brass gear wheel..
  • Made of brass material, not easy to wear, durable and lasting performance. This gear wheel & shaft are the excellent industrial replacement accessory..
Check Stock

PIKASOLA 1000W 24V Permanent Magnet Wind Turbine Generator 3 Blades Economy Homes Windmill for Wind Solar Hybrid System 2.5m/s Start Wind Speed with Controller for Wind Solar System (24V)

  • 1. Principle: horizontal shaft wind turbine generator, refers to the horizontal installation of shaft, parallel to the ground. The wind drives the blades to generate kinetic energy, which in turn drives the engine to generate electricity. Core components: blade + generator (engine) + rotating body + wind tail.
  • 2. Wind blade: 37.4 inch in length, made of nylon carbon fiber. The longer the blades are, the more kinetic energy they generate and the more power they produce. Nylon material waterproof, corrosion resistant, lightweight, high efficiency..
  • 3. Generator: three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged. The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage.
  • 4. Rotating body: with yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle, with low starting speed and low vibration..
  • 5.Remarks: our products are designed after repeated experimental testing, and the parameters....
Check Stock

Bike Axle CYSKY Quick Release Skewer Front Rear Bicycle Axle Wheel Hub Fit for Road Bike Mountain Bike MTB BMX 1 Pair

  • Made of Iron, durable and practical for most bikes.
  • Shorter set of hollow shaft and hub quick release lever for the front wheel, longer one for the rear wheel..
  • Short release lever for front wheel, hollow shaft size: 10.8cm / 4.25", quick release: 16cm / 6.3".
  • Long release lever for the rear wheel, hollow shaft size: 14.5cm / 5.7", quick release: 19cm / 7.48".
  • You can use it to repair your mountain bike quickly. Perfect for cycling lovers, your best choice..
Check Stock

Upgraded Rebuild Kit for Holset HX35 HX35W HY35 HX40 HE351 HE351CW Turbocharger

  • These turbochargers were popular for Dodge Cummins turbodiesels and other Cummins powered vehicles.(will not fit VE, H1C & H1E turbos).
  • Both type journal bearing included – the HX35/HY35/HX35W/HX40 style and the HE351/HE351CW/HE341 grooved style bearing..
  • This stepped gap seal provides a superior seal over the stock type oil seal ring..
  • It greatly reduces the build up of power robbing deposits due to oil leaking through the seal into the turbine housing and on the turbine wheel..
  • Gaskets are high quality fiber material with controlled-swell styrene butadiene rubber binder and can withstand 375°F temperatures..
Check Stock

Free-fly MTB Quick Release Bicycle Hub Road Mountain Bike Front & Rear Axle Hollow Shaft Set with Standard Spacing 1 Pair 4 Piece

  • Made of Iron, durable and practical for most bikes.
  • Short release lever for front wheel, hollow shaft size: 10.8cm / 4.25", quick release: 16cm / 6.3".
  • Long release lever for the rear wheel, hollow shaft size: 14.5cm / 5.7", quick release: 19cm / 7.48".
  • The quick release skewer weight: approx. 270g / 9.2oz, color: black.
  • Shorter set of hollow shaft and hub quick release lever for the front wheel, longer one for the rear wheel..
Check Stock