ReviewsTurbocharger Bearing Housing

Bang II (Feat. Uppercase 5ive)

  • Fully milled gearbox housing made of 6061-T6 aluminum for the rear axle of ATOPRC.
  • Due to its dimensional stability results in a higher load capacity and service life of bevel gear and ball bearings. The problem of the torn fastening thread has an end with this case.
  • The bearing adapters are included in the set.
  • We recommend gluing the bearings with threadlocker y0113. For mounting the bearing adapters in the housing we recommend Bindulin silicone y19015. To use HD differential shafts y1477, the Atoprc bearing adapters must be machined.
Check Stock

Industrial Black Metal Furniture Legs,Black Cast Iron Table Legs,RetroHeavy Duty Square Tube Desk Legs,Metal Dining Coffee Work Table Bench Furniture Legs,Set of 2

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

UCT202-010T NTN New Ball Bearing Take Up

  • Take-up block with spherical roller bearing insert for use with a Rexnord center pull frame.
  • Cast-iron housing and self-aligning steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing take-up block for maximum strength and rigidity.
  • Fixed-type bearing with a single setscrew locking collar for secure attachment to a cylindrical shaft.
  • Metal clearance seal for no speed or temperature limitations, and no frictional drag.
Check Stock

Dorman 625-829 Turbocharger Oil Line for Select Buick/Chevrolet Models

  • ... 7815040007, 7815041, 781504-1, 7815042, 7815044 7815045, 781504-6, 7815045001S, 781504-5004, 7815045004S, 7815045006..
  • Application Vehicle: Bui-ck Encore 1.4L L4 2013-2019.
  • What is a turbocharger? A turbocharger is a device fitted to a vehicle’s engine that is designed to improve the overall efficiency and increase performance. This is the reason why many auto manufacturers are choosing to turbocharge their vehicles. And as time goes on, more and more vehicles will be fitted with them..
  • Function: A turbocharger can increase the power of your engine by up to 35%. It can start the machine in a short time,make the boost comes up fast and pulls strong, making it work more efficiently. Made of nickel-based casting alloy,solid product appearance, can withstand high pressure. It also can extend the life of the car after installing and using the turbocharger..
  • Note: Installation under professional instruction is recommended. If you have any questions, do not hesitate to contact us, and we will reply you as soon as possible..
Check Stock

SKF F2B 100-RM Ball Bearing Flange Unit, 2 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1\ Bore, 3-7/8\ Bolt Hole Spacing, 3150lbf Dynamic Load Capacity

  • Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular.
  • Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
Check Stock

SKF F2B 108-RM Ball Bearing Flange Unit, 2 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 5-21/32\ Bolt Hole Spacing, 6900lbf Dynamic Load Capacity

  • Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular.
  • Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
Check Stock

BOXI Turbocharger Intercooler Hose Assembly For 2003 2004 2005 2006 Dod-ge Sprinter 2500 3500/2002 2003 2004 2005 2006 Mercedes-Benz Sprinter 2500 3500 2.7 L5 DIESEL / 26272 5120147AA

  • This Gates Turbocharger Intercooler Hose is compatible with Dodge Sprinter 2500 2006, 2005, 2004, 2003 2.7L L5 (Intercooler to Engine Cold Side ) and is perfect for a tune up or performance upgrade..
  • ENHANCE PERFORMANCE: The Gates Turbocharger Intercooler Hose features a high-quality silicone cover for extreme temperature resistance in high-temperature conditions. The Gates Turbocharger Intercooler Hose has all the parts including turbocharger hose and 2 correctly fitted T-bolt clamps (where shown) needed to complete your repair.
  • MAXIMIZE SERVICE LIFE: Manufactured with multiple layers of reinforcement, the Gates Turbocharger Hose showcases a specially formulated fluoro-elastomer liner that prevents oil permeation while the T-bolt clamps with stainless steel band and bridge both resist corrosion and provide higher torque for optimal sealing. Built to last, Gates manufactures OE-quality hose solutions that comply with SAEJ2050 specifications to help minimize maintenance.
  • RELY ON QUALITY BELTS AND HOSES: In the most extreme environments and those more familiar, Gates is there with the right product, in the right place, at the right time. Whether building original equipment or maintaining products in the aftermarket, they enable their customers to be ....
Check Stock

Turbo Compatible For 99.5-03 Ford Turbo Diesel 7.3L Gtp38 F250 F350 F450 Powerstroke Super Duty Turbocharger New

  • DUE TO COVID-19, AMAZON PRIME SERVICE MIGHT BE DELAY OR UNAVAILABLE. IF YOU SEE ITEM IS UNAVAILABLE, PLEASE CALL (626)308-2996 FOR DIRECT SHIP OUT..
  • Brand new turbocharger, 1 year unlimited mileage warranty, No core charge, call 626 308 2996 to get discount on express shipping service.
  • Fit: 1999.5-2003 Ford Truck Powerstroke, Superduty, F-Series, Engine: Navistar, GTP38. Displacement: 7.3L.
  • Reference Part Numbers: 1831383C92, 1831450C91, 1831452C91, 1831383C93, 1831383C94, 1831450C94, etc..
  • This turbo cannot fit early model of year 1999, make sure there are 5 bolts on your turbo compressor housing..
Check Stock

Sealmaster NP-27 Pillow Block Ball Bearing Non-Expansion Type Normal-Duty Regreasable Setscrew Locking Collar Felt Seals Cast Iron Housing 1-11/16 Bore 2-1/8 Base to Center Height 5-3/4 Bolt Hole Spacing Width

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

Remanufactured Supercharger Turbocharger Roots Car Auto Kompressor Supercharger Compresspr blower booster Kompressor for 0.8-2.0L AISIN AMR500

  • Mechanical car auto compressor kompressor turbocharger turbine, mini roots supercharger blower booster for 0.8-2.0L AMR500..
  • AMR500 Turbocharger can be reduced 3%-10% in fuel consumption..
  • AMR500 Supercharger can be increased 10% - 30% in engine power..
  • The direction of rotation of the turbocharger is the same as that of the engine..
  • NOTE:Installation Manual Is NOT Included ,Professional Installation Is Highly Recommended.Note that the supercharger is a v pulley (VPK), Before installation, the gear oil must be filled with about 90ml, and the oil type is 85w-90, GL-5..
Check Stock

Sealmaster NP-16 Pillow Block Ball Bearing, Non-Expansion Type, Normal-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1" Bore, 1-7/16" Base to Center Height, 4-1/8" Bolt Hole Spacing Width

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock