ReviewsTurbocharger Turbine Wheel Shaft

Turbo Rebuild kit for Holset HX35 HX35W HY35 HX40 HE341 HE351 HE351CW

  • These turbochargers were popular For Cummins turbodiesels (will not fit VE, H1C & H1E turbos).
  • Both type journal bearing included – the HX35/HY35/HX35W/HX40 style and the HE351/HE351CW/HE341 grooved style bearing. Upgrade Step Gap Turbine Seal....
  • It greatly reduces the build up of power robbing deposits due to oil leaking through the seal into the turbine housing and on the turbine wheel..
  • If your turbo is an HX40 you may need two turbine seals because some HX40 turbine shafts utilized two turbine end seals. This kit contains two turbine....
  • Nice quality kit. Complete gasket set included. Gaskets are high quality fiber material with controlled-swell styrene butadiene rubber binder and can....
Check Stock

Pulsar Turbo Systems GTX3071R GEN II Dual Ball Bearing Turbo Billet Compressor T3 0.63

  • 8 Blade Gen2 Billet Compressor Wheel with Extended Tapered Tip Technology.
  • .84 Trim high flow Inconel 713c turbine wheel, rated at 340-650hp, Max Air Flow rate: ~60 lb/min, rated @ 650 FWHP.
  • Gen2 Cover Integrated with the Speed Sensor Port.
  • Performance turbo for race applications with 1.8 – 3.0L engines.
Check Stock

55565353 667-203 Docas Turbocharger Turbo Compatible with 2013-2019 Buick Encore 2011-2019 Chevy Cruze 2012-2019 Sonic 1.4L

  • When the performance of the supercharger is reduced the compressor or turbine blade is damaged or the noise generated when the turbo chargers is operating, it's time to replace your turbocharger.
  • Compatible with 2011 - 2019 Chevy Cruze 1.4L L4, 2016 Chevy Cruze Limited 1.4L L4, 2012 - 2019 Chevy Sonic 1.4L L4, 2013 - 2019 Chevy Trax 1.4L L4.
  • Compatible with 2013 2014 2015 2016 2017 2018 2019 Buick Encore 1.4L L4.
  • Replace part numbers: 667-203, 667203, 55565353 7815040001 7815040002, 781504-0002 7815040004 781504-0004 7815040001 781504-0001 7815040002, 7815040004 7815045006 55565353, 7815040005 781504-0005 7815040006.
Check Stock

GM G-Body Performance Upgrades 1978-1987

  • Two year, unlimited-mileage warranty. Guaranteed Exact Fit for easy installation.
  • Direct bolt-in replacement for the factory BorgWarner K03 unit, with larger K04 style compressor housing and wheel..
  • This is NOT LEGAL for sale or use in California, Colorado, or anywhere else that requires CARB emissions certification.
  • Fits all US-spec 1997-2006 Audi A4 & VW Passat 1.8T. Does NOT fit VW Golf, Jetta, Beetle or Audi TT due to different mounting points. This Turbocharger is NOT CARB-approved and not legal for sale in California..
  • This is a K04-style bolt-in high performance upgrade turbocharger. Please note that your results may vary depending on which supporting mods are done to your vehicle. It is HIGHLY recommended that you upgrade your fuel injectors, intercooler, and have the vehicle professionally tuned for maximum potential and reliability.
Check Stock

Universal Car Turbo Charger Manual Boost Controller 1-30 PSI Manual Adjustable Boost Controller - Black

  • Material: The turbocharger pressure regulating valve is made of high-quality aluminum, and the surface is anodized, which is not easy to rust, high temperature resistant, durability and practicality and long service life.
  • Easy to install: It is easy to install, cut the turbo vacuum tube, install the tee, one end of the controller is connected to the vacuum tube, and the other end is connected to the pressure relief valve.
  • Function: The pressure regulator valve adjusts air pressure, improves engine performance and reduces fuel consumption. When the turbine starts, an extremely high pressure is generated inside.
  • Scope of application: Suitable for most turbocharged and supercharged cars.
  • Customer Service: If you are unsure about our products, please contact us through Buyer Information. We will provide you with a solution within 24 hours..
Check Stock

Enrilior Subaru Downpipe 5 Bolt to v Band,TD04 5 Bolt Turbo Downpipe Flange to 3in V-Band Conversion Adaptor Fit Compatible with Subaru WRX 14412AA451

  • Made of high quality stainless steel material, high strength and toughness..
  • It has strong impact resistance and scratch resistance, and has both moisture and corrosion resistance..
  • This adapter flange converts the standard TD04 5 bolt turbine casing downpipe to a 3in V-band..
  • The outer 5 holes are used to bolt the flange and then convert the turbocharger exhaust to 3in..
  • Good sealing, which can eliminate leakage caused by poor welded joints..
Check Stock

55 Gallon TH Swing T-Style Barrel Mixer | Triple Mixer Blade for Barrel-36 Shaft

  • 3-5 3/4" Mixer Head x 1/2" Shaft Diameter x 36" Shaft Length.
  • Inserts into the Tight Head 2" Coarse Threaded Bung Cap Hole.
  • T-Style Triple Mixer Blade for Barrel-36" Shaft.
  • Turbine-like teeth on the top and bottom produce a tornado-like mixing action.
Check Stock

TOPEMAI 7.3L Powerstroke Turbo Upgraded 360°Thrust Rebuild Kit Compatible for 1994-2003 Ford Garrett GTP38 TP38 Replacement 817-1004-002F by TOPEMAI

  • GTP38 Rebuild Kit fits 1994 - 2003 Ford 7.3L Powerstroke Turbochargers,for Ford Excursion F-350 Super Duty E-350 Club Wagon F-250 Super Duty E-350....
  • GTP38 Rebuild Kit is durable,upgraded 360 Degree Copper Bar Thrust Bearing,Copper helps dissipate heat much better than the factory steel thrust....
  • 94-03 Powerstroke 7.3L Turbo Upgraded 360°Thrust Rebuild Repair Kit for Ford replace Turbo P/N:817-1004-002F,813-1002-002.
  • With the upgrade turbine side stepped gap piston ring, it can also eliminates the oil leaking problem. Every Item per Garrett Turbocharger Standard....
  • Feel free to contact us by emails if you have any problems..
Check Stock

Pulsar Turbo 99.5-03 7.3 GTP38 Turbo Rebuild Kit+Turbine Wheel

  • 360 degree CNC machined brass thrust bearing for better durability.
  • Staggered step gap seals on compressor and turbine ends to reduce oil leaking.
Check Stock

Cutting Edge Power DC Wind Turbine Project Motor Generator

  • Voltage output: 0-30V . Maximum Generator Output: 15 watts.
  • 1/8" (3mm) shaft diameter. Shaft has a flat spot for attaching the blade.
  • Two 3/16 spade terminals for power connection.
Check Stock

Fits Shopsmith Lathe Spindle Adapter 1/2 -20 Threads 5/8 Smooth Motor Arbor

  • M10-5mm sleeve, suitable for 16mm bore of the saw blade or grinding wheel, connect 5mm shaft or 5mm motor shaft.
  • M10-8mm sleeve, suitable for 16mm bore of the saw blade or grinding wheel, connecting 8mm shaft or 8mm motor shaft..
  • M10-10mm sleeve, suitable for 16mm bore of the saw blade or grinding wheel, connecting 10mm or 10mm motor shaft.
  • M10-12mm sleeve, suitable for 16mm bore of the saw blade or grinding wheel, connecting 12mm shaft or 12mm motor shaft.
Check Stock