ReviewsTurn Signal Switches Combination

Partsam 2Pcs 2\ x 6\ Rectangular Trailer Marker LED Lights 21 Diodes with Chrome Plastic Light Bezel w/Visors, Amber 6\ x 2\ Rectangular LED Marker Lights/Turn Signal lights Surface Mount

  • ...me plastic light bezels with visor helps you dress up your 2 inch by 6 inch trailer style rectangular LED lights. Note: this bezel mounts over your existing marker light. You may need to use a little silicone for a more stable hold.
  • 6" amber led marker lights 3 wires pigtails: 6 inch rectangle LED lamp for use as a combination turn signal lights and running lamps, can be installed anywhere you'd like to surface mount them. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker light (or only an auxiliary turn signal light) by using two wires and leaving the third wire unused.
  • This 6x2 led marker light is hardwired with 3 wire pigtails: White is ground, black is low brightness as marker lights or running lights, red is high brightness as turn signal lights.
  • Overall dimensions: 6" x 2.18" x 1.57" approx. and hole to hole distance: 4.92".
  • These 2x6 led trailer lights are universal for almost all 10-30 DC volts vehicles like truck trailers Motorhome or heavy trucks like peterbilt, kenworth, freightliner etc. You can found on road people use them for kenworth bumper lights, car aux turn signals, Motorhome turn signal lights and son on. Note: This 2x6 rectangular m....
Check Stock

Signaworks LED 5 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts to Build a Highly Visible, Red/Amber/Green/Blue/White LED Andon Tower Light with five 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Five 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case o....
Check Stock

Signaworks LED 3 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This is a Kit of all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, three 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in cas....
Check Stock

Signaworks LED 4 Light Steady & Flashing Andon Tower Light Kit - Parts Only Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green/Blue LED Andon Tower Light with four 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Four 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable....
Check Stock

TSL1401CL Linear Sensor 128X1 Linear CCD Camera Sensor Ultra Wide Angle Lens 120 Degree Black and White Line Tracking Module

  • BASIC SPECIFICATIONS: With sensitivity pure tones , field cut and signal output, circuit board output switch (can be directly passed through the microcontroller).
  • MULTIPLE OUTPUTS: The linear magnetic sensor switches has signal output indication, single signal output, active low signal output.
  • IDEAL CHOICE: This linear magnetic sensor switches is ideal for temperature control, proximity switches, alarm detection or rotate encoders.
  • WITH SENSITIVITY: Universal sensor module with potentiometer to adjust the sensitivity of the sensor, provides analog and digital output.
  • HIGH COMPATIBILITY: With A3141 chipset, 49E linear effect sensor, LM393 dual differential comparator, potentiometer, 2 LED and 6 resistors, fully compatible with standard microcontrollers.
Check Stock

Partsam 20 x 3/4" Round Led Light Trailer Boat Marker Clearance High Low 3SMD Clear Lens, 3/4" round LED combination turn signal running lamp fender lights 3-WIRE assembly Taillights(10Red+10Amber)

  • Package includes 20Pcs(10Pcs Red and 10Pcs Amber) 3/4" Led Marker Lights 3 Wires in Clear Lens, 3 diodes per light, Fix 3/4" Hole.
  • Sealed Light, 3 Wires Setup, High Low Function.
  • 3/4" amber led marker lights 3 wres in clear lens: 3/4" round LED lamp for use as a combination turn signal and running lamp, can be installed anywhere you'd like to mount them by drilling a 3/4" hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp(one function at a time). It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused.
  • 3/4" red led marker lights 3 wres in clear lens: Clear Lens Red Mini 3/4" Stop Turn Tail Lights 3 LED with Rubber Grommets,very bright for it's size. Dual brightness. install with a rubber mounting grommet and requires a cutout hole of 3/4" diameter. These 3/4" led lights come with 3 wires (white wire ground, black wire is tail light/marker light/clearance light/running light and red wire is for stop and turn functions). This light is DOT approved as your only tail light or turn signal.
  • These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet....
Check Stock

UCTRONICS PoE hat for Raspberry pi

  • For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
  • Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
  • Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
  • NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..
Check Stock

PBYMT 1157 LED Turn Signal Light,Front Rear Running Brake Light, 2\ Smoke Lens Cover, Compatible for Harley Davidson Sportster Softail Touring Electra Street Glide Road King 1997-2022

  • ▶FITMENT - Aftermarket front rear turn signal light kit compatible for Harley 1986-2020 models which with 2 inches standard bullet style turn signal lights and 1157 socket.*Does NOT fit 3-1/4” flat style turn signals or 1156 socket.Plug and play on most models.The turn signals may flash faster than normal on 2010-older Softails,2011-older Dynas,2013-older Sporsters,and 2013-older Touring and Tri-Glide models. If a slower flash rate is desired,the load resistor is required..
  • ▶NEW DESIGN LED TURN SIGNAL LIGHT - The LED turn signals feature raw LEDs without lenses giving the benefit of more light output. Each 1157 bulb is brighter 150% than traditional halogen bulb,you can switch turn signal and running light anytime.The front turn signal bulbs are switchback model, outer white ring for running light and center amber for front turn signal.
  • the red rear turn signal bulbs integrated tail light with brake light and turn signals function..
  • ▶VARIOUS APPLICATION - The front turn signal bulbs are switchback model, outer white ring for running light and center amber for front turn signal.
  • ▶SMOKE LENS COVERS - Made of high quality PC plastic,mounted on the turn....
Check Stock

Partsam 14Pcs 6.5" Inch Amber LED Side Marker Lights Clearance 16 Diodes Surface Mount Led Cab Panel Lights Turn Signals Sealed Waterproof 12V

  • Partsam 14 Pieces 6.5 inch amber 16 diode LED marker lights - Amber Lens. These side marker lights function at 12 volts dc current. Each led marker light contains 16 high-flux LEDs and consumes less energy than incandescent lamps.
  • These oval led marker lights can be used as a combination turn signal and running lamp. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. This trailer marker light is a flush mount style light and Mounting hardware not included.
  • Dimensions: 16.5cm(6-1/2") x 5.5cm(2") x 2cm(3/4"). Hole to Hole Distance: 118mm (about 4-5/8").
  • can be function as marker light, clearance lights, turn signal lights.
  • fits in a combo-style hole and Chrome bezel hides mounting screws.
  • sonically-sealed lens and IP65 waterproof housing, please do not use it under water.
  • Different from many other truck marker lights in the market, there led marker clearance lights have a more modern, curvy shape and look great on your bumper, cab-and-sleeper kits, fender guards, and just about everywhere else you can imagine. Its long, thin footprint and flush-mount installation makes it a ....
Check Stock

Partsam 10Pcs 3/4" Round Amber Trailer Led Marker lights 3 wire Turn Signal Light Clearance Lights Grommet Mount for Trailer Truck Fender Marker Lights Sealed

  • Partsam ( 10 x Amber ) 3/4" Side Marker light Grommet Mount Single Led, Install them on the front or rear of your vehicle as side marker lights, clearance lights, auxiliary turn signals or supplemental brake lights.
  • 3/4" round, Amber lens LED lamp for use as a combination turn signal and running lamp, for use with Poison Spyder fenders or anywhere you'd like to mount them by drilling a 3/4" hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. includes pigtail harness and mounting grommet for use on your vehicle.
  • Universal for most 12V vehicles. Perfect for Trailer, Truck, Car, Bus, Pickup, ATV, UTV, Van, Semi-trailer, Camper, RV, Boat Trailer, SUV, Caravan, Cabin Cars, Lorry, etc.
  • EASY TO INSTALL - 3 Wire Connections: Black is Negative, Red+Black - high brightness, White+Black - low brightness.Outer Diameter: 26mm (1.02'').
  • Package include:10x Amber 3/4" Side Marker Light. 1 Years Warranty Guarantee, Feel free contact us for any question.
Check Stock

DEDC Pair 08-15 Fit for Ford Super Duty F250 F350 F450 Power Heated with Signal Light Towing Mirrors 2008 2009 2010 2011 2012 2013 2014 2015

  • FITMENT: 2008-2015 Ford F250 F350 F450 Truck,Fits both LH (Driver Side) & RH (Passenger Side).
  • FEATURES: Power operation,Heated Function,With Amber Turn Signal Light.Original Shape,Manual Telescoping,180 Degree Swing.
  • OEM Number: 8C3Z-17683-BC,8C3Z-17682-BC,8C3Z17683AC,8C3Z17682AC.
  • PLEASE NOTE: You cannot add functions like power, heat, or turn signal if your vehicle did not have those functions or combination of functions on the....
Check Stock