ReviewsTurning Center

Hegebeck Combined Center Drills Bit Countersinks Plain Type 1/8 Inch Dia Shank High Speed Steel HSS 6542 Silver 5 Pcs

  • 【MATERIAL】-This combined center drills was made by High Speed Steel 6542,which is solid and high temperature wear resistant，not easy to break.
  • 【ADVANTAGE】-Used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walking..
  • 【FEATURE】-Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes..
  • 【APPLICATIONS】- Work with lathe machines and most electronic drills to drill holes in steel, iron, alum, carbon steel, brass,etc.
Check Stock

WEN LA3424 4.5-Amp 12-Inch by 18-Inch 5-Speed Benchtop Wood Lathe

  • Attack work pieces up to 18 inches long and 12 inches wide.
  • Switch between five different speeds: 520, 900, 1400, 2150, or 3400 RPM.
  • Includes 3-1/8 inch Faceplate for turning bowls, cups and other non-spindle work pieces.
  • MT2 tailstock and headstock tapers allow for compatibility with a wide variety of Lathe Accessories.
  • Features a 4. 5A motor, an MT2 headstock spur center, an MT2 tailstock live center, an 8-inch tool rest, and an on-board accessory holder.
Check Stock

3M FF-400-15 3M Lens Cover For Use With Ultimate FX Full Facepiece Reusable Respirators FF-401, 402 And 403 (25 Per Bag)

  • Remove center adapter assembly by turning counter-clockwise 1andfrasl.
  • 4 turn and withdrawing from lens center port.
  • Remove the (2) Philips screws from the lens/face seal frame. Pull the frame top and bottom away from face seal.
Check Stock

Bikehand Bike Repair Stand - Home Bench Mount Bicycle Mechanics Workstand - for Mountain Bikes and Road Bikes Maintenance

  • SPECS: The Distance From The Center Of The Clamp To The Center Of The Mount Is Approximately 8" (20.5cm), The Distance From The Bench to The Center of....
  • ROTATED HEAD: Smart Design: Head Rotated:360 Degree By A Quick Release And Turning Knob. The Teeth And Clamp Are Well Made And Heavy Duty. It Could....
  • DURABLE: The Bike Work Stand Was Released To The Market For More Than 10 Years. It Has Been Approved One Of The Most Reliable And Durable Bicycle....
  • MOUNTS TO ANY FLAT SURFACE: Mounting Bolts NOT included.
  • Bikehand QUALITY: ORDER NOW, WORRY FREE! Made in Taiwan We're So Confident About Our Product Quality That If You Have Any Product Issues, We’re Very....
Check Stock

RIKON Power Tools 70-105 10\ x 18\ 1/2 hp Mini Lathe

  • Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change..
  • Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum..
  • 5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing..
  • Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches..
Check Stock

Peachtree Woodworking Supply Pen Blank Centering Vise for Drilling Center Holes in Pen Blanks Using a Drill Press

  • Easily locate and drill pen blank centers and Drill through the exact center of your pen blanks with this simple but effective Pen Centering vise. By far one of the best selling pen vises available, this jig will be a go to tool when turning your pens..
  • The jaws on the drilling center move in and out simultaneously to insure precision center drilling of your blanks each and every time you use the vise..
  • Just set up the vise once and drill all of your blanks in the exact center. There is no need to change the setup regardless of the blanks size or shape..
  • Holds blanks up to 1-1/2" square. The pen center vise includes a scrap board piece of mdf. It measures approximately 2" by 1/4"..
  • The scrap piece can be flipped, slid and reversed to get numerous uses out of a single piece. When you use up all of the surface, simply cut another piece out of 1/4" thick stock. Wooden base is removable and replaceable. If you need a larger base to clamp the vise to your drill press, simply remove the wooden base and replace it with a base made to your exact specifications.
Check Stock

WFLNHB Live Center 2MT 60 Degree Lathe Medium Duty Live Tailstock Center for Wood & Metal Lathe CNC Work

  • Specification: #2 Morse Taper (2MT) shank, 60-degree point, 5000 Max RPM, 600 lbs max workpiece weight, runout of 0.0004in/0.01mm T.I.R..
  • Material: The live revolving center is made of precision ground hardened steel, hardened to 61-65HRC, with high rigidity and wears resistance.
  • Triple Bearing Design: The 2MT activity center adopts a combination of a thrust ball bearing and two ball bearings for stable and smooth rotation.
  • Seal Ring: There is a seal ring at the front gland to prevent the entry of cutting fluid and dust.
  • Application: The live center MT2 is specially designed for lathes under medium-speed and medium-load environments. It can be used for high-speed turning and is suitable for CNC lathes.
Check Stock

Childproof Gas Stove Knob Locks 5 PCS Child Safety Guards Acrylic Adhesive Installation

  • 1. [Easy to Use for Adults] The new unlocking method with a improved safety factor makes it hard for babies to figure out and open, but easy for adults to open/close the device with one hand. Prevent kids from turning on stoves and ovens, which could cause fires or release harmful gases..
  • 2. [Universal Size] In order to fully cover more different shapes and sizes of gas stove knobs, the size has been upgraded to fit gas stove and oven knobs with an inner diameter of less than 2.4 inches..
  • 3. [High Temperature Resistant & Clear View] Made of hard PC material, high temperature resistant, can ensure the quality and longevity of the gas stove knob covers. And the ultra-clear stove safety knob covers will not block the view of the temperature control mark when closed..
  • 4. [Child Safety Kit - Easy to Install] The pack contains 5 childproof stove knob covers & 1 oven lock child safety. It comes with 5 pieces of strong adhesive, you can choose to use the adhesive to fix the gas knob protectors covers to the stove to prevent the cover from turning. It will not cause any damage to the surface of the stove and the adhesive pad....
Check Stock

Grizzly Industrial G0842-14" x 37" Wood Lathe with Copy Attachment

  • Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change..
  • Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum..
  • 5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing..
  • Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches..
Check Stock

OSCARBIDE 1/2\Indexable Grooving Parting Holder QA08R-20 Heavy Duty Nickel Plated Right -Hand Lathe Cut Off Tool with Carbide Insert GTN-2, 1 Piece

  • Size：Shank Size (B x H): 1/2" x 1/2" Overall Length (L): 4.5".
  • GTN-2 insert stop assures accuracy of center height and precise depth of cut.
  • Simple set-up with one piece integral shank holder adapts easily to any machine type and turret configuration.
  • Opening of wide grooves by plunging and side turning,wedge clamping of insert provides superior stability in close quarters face grooving cuts.
  • For external parting & grooving, profile/copy turning.
Check Stock

PCIE Sound Card, 6channel Stereo Desktop Sound Card, 3D Stereo PCIe Audio Card,Suitable for Windows 7/Vista/XP 32/64bit PC Computers

  • Using for CMI8738 5.1 multi‑channel audio chip, compatible for DirectSound 3D and EAX audio effects..
  • 6-channel surround sound output, support front left/right, surround left/right, center/subwoofer, S/PDIF-Out interface..
  • Has the function of eliminating noise balance when turning off or turning on the computer..
  • Provide surround sound field and clear sound quality, suitable for home theater, large-scale 3D games, enjoy music and other entertainment..
  • Supports PC computer systems with PCI‑Express slots such as for Windows 7/Vista/XP 32/64‑bit..
Check Stock