ReviewsTurning Tool

Woodturning Carbide Lathe Tools 17” Full Size Wood Turning Tool Set of 3 Rougher Detailer Finisher Includes Replacement Cutter Inserts 6 pcs – Diamond Round and Square Screws and Key Star Wrenches

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Re....
Check Stock

Simple Woodturning Tools Carbide Lathe Turning Tool Set of 3 Full Size with 17 Foam Grip Handles USA Made

  • American Made Set of 3 Full Size Carbide Lathe Turning Tools with Color Coded Handles: Hollower, Detailer & Rougher.
  • 17" long solid aluminum foam grip tool handles are color coded for easy tool identification. Overall tool & handle length is 26.5"..
  • This set of carbide lathe tools is ideal for turners at any skill level. With carbide it's all turning and no sharpening so you can begin turning....
  • Each lathe tool is 1/2" square CNC machined by Harrison Specialties in Ramsey, Minnesota. These tools are designed to be kept flat on the tool rest....
  • Each lathe tool features a carbide tip with multiple sharp edges that can be rotated several times. A Torx star wrench is included..
Check Stock

Hollower Swan Neck Woodturning Lathe Tipped Tool Bended Lathe Chisel Tool Hollower with 12mm Round Carbide Insert and a Screw and star key wrench for wood hobbyist or DIY or carpenter, RC-12

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of inde....
Check Stock

Toolly 0XA Wedge Type Quick Change Tool Post Set For Mini Lathe up to 6-9 Inch Swing OXA TOOL POST

  • Quickly and easily install on an engine, bench, or turret lathe for a wide range of operations. Fully interchangeable with Aloris, Dorian, Phase II,....
  • This set includes: No. 0 Wedge Type Tool Post(1.75" L x 1.75" W x 2.5" H), No. 1 Turning & Facing Holder(up to 1/2" tool capacity),.
  • No. 2 Boring Turning & Facing Holder (up to 1/2" tool capacity), No. 4 Heavy Duty Boring Holder (3/8" & 1/2" tool capacity),.
  • No. 7 Universal Parting Blade Holder (1/2" tool capacity), No. 10 Knurling, Turning & Facing Holder (up to 1/2" tool capacity)..
  • Stud size is M10 and is perfect for most mini lathes, although modification may be needed for some machines (a bushing or new center stud for a....
Check Stock

Accusize Industrial Tools 1/2 x 1/2 x 4 in. (Width by Height by Oal) Hss+5% M35 Cobalt Lathe Tool Bit, 5095-0032

  • M35 Cobalt (HSS + 5%) square lathe tool bits blank, much harder and more durable than M2 high-speed steel lathe tool bits.
  • Ground for heavy-duty cuts on casting and forgings. It has significantly higher wear resistance than M2 HSS。.
  • You may machine it to turning tools to do any lathe turning operations. The possibilities are infinite..
  • Step turning, taper turning, chamfer turning, contour turning, facing, grooving, parting, cut-off, internal threading, outside threading, boring, knurling, etc..
Check Stock

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • Package: you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
Check Stock

3PCS 5/8\ CNC Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 3pcs wnmg431, cnmg431, tnmg331 Indexable Carbide Inserts (Right Cutting)

  • ★Package Included：3pcs indexable carbide turning tool holder (MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 ).
  • 3pcs indexable carbide turning inserts (CNMG431 + WNMG431 + TNMG331).
  • ★Shank Diameter （length×width）: (16*16mm ≈ 5/8"x5/8" ).
  • Overall Length：(100mm ≈ 3-7/8" ) ,Cutting Direction：right hand..
  • ★The material of the turning tool holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
  • ★The material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
  • ★If you need more matching insert or 5/8" left turning holder set, you can search for B07G386Y3B , B07Q1117MJ (inserts) or B07B8XNH98 , B07TTL32HW (holder).
Check Stock

IRONWALLS Carbide Wood Lathe Turning Tools Set, Carbide Tipped Turning Chisels for Lathe Include Finisher, Rougher, Detailer, Carbide Lathe Tools Woodworking with Interchangeable Handle & 8PCS Inserts

  • 【Complete Wood Turning Chisels Carbide】IRONWALLS carbide tipped wood lathe turning tools set for woodworking includes 1 x 11.2” Interchangeable grip handle, 1 x 10.6” Extension Rod, 4 x 9.6” stainless steel arbor shafts, 2 x round inserts, 2 x square inserts, 2 x diamond inserts, 2 x square circle inserts, 1 x T15 wrench, 1 x L-shape wrench and beautifully packaged in an easy-to-store & carry aluminum box..
  • 【Adjusted Freely for Different Applications】Designed with a small lock on the lathe tool handle and coming with a removable extension rod, you can adjust the length of the shafts and the overall length of the carbide lathe tools woodworking freely. Furthermore, this wood turning lathe kit includes 4pcs shafts with 8pcs carbide inserts, which does not need to frequently change inserts in complex turning tool projects so that improving the working efficiency..
  • 【Rotatable Blade Insert Design】Per piece of carbide insert tip is designed with four indexable tungsten carbide edges, which are sharp, solid and wear-resistant. When one edge of the cutter head is blunt, you can turn it to a new edge, which makes the blade can be used for a longer time, money saving. Furthermore, there are 8pcs carbide wood lathe tools blade inserts replacemen....
Check Stock

OSCARBIDE 5/8\Shank 7 Pieces/Set Indexable Lathe Turning Tool Holder,CNC Metal Lathe Tools Heavy-Duty for Turning Grooving Threading Nickel Plated Cut Off Set, Tin Coated Carbide Inserts

  • OSCARBIDE 5/8" Heavy-Duty Turning tool set including 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external lathes turning holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder.
  • Turning Holders are made of high quality steel with Nickel Cotated, Cutters are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use.
  • Metal Lathe Cutting Tools Used for semi-finishing/roughing steel, Metal,Fit for Turning,grooving or threading.
  • Replacement Cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it..
  • 7pcs lathe cutting tool holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

uxcell Indexable CNC Lathe Turning Tool Holder 93°DVJNR2020K16 3/4 Shank Carbon Steel Carbide Turning Tool Holder for Turning Grooving Threading

  • [Specification] - Cutting Angle: 93°, Cutting Direction: Right, Material: High Steel, Model: DVJNR2020K16, Holder Width: 20mm / 0.79inch, Holder Thickness: 20mm / 0.79inch, Total Length: 125mm / 4.92inch, Available Inserts: VNMG16 Inserts.
  • [Durable to Use] - The material of the turning tool holder is Carbon Steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance..
  • [Finish] - Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size for easy identification of the tool holder..
  • [Wide Range of Applications] - The boring bar is suitable for cutting step surface processing and other processing..
  • [Package Content] - You will receive 1pc indexable lathe turning tool holder(carbide insert not included) and 1pc wrench..
Check Stock