ReviewsTurning Tools

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

Lathe Tools, 18.6inch Full Size Carbide Lathe Wood Turning Tools with Rougher Finisher Swan Neck Solid Handles for Beginner Experienced Turners to Work on Lathe

  • UNSTOPPABLE - Carbide lathe tools are becoming popular these days. They are easy to use, stay sharp for a long time, and the cutter swaps out in a few seconds when it becomes dull, you can get right to turning without all the fuss.
  • ERGONOMIC GRIP - Turning tools with a wood handle for the toolbar, The comfortable rubber grip helps reduce hand fatigue while turning, allows long time working, Vibration-absorbing toolbar, improve the surface finish of the workpiece.
  • EASY TO USE - Very simplified learning by turning, no complicated angles to learn and remember, for all skill levels, woodworking or DIY enthusiasts. Whether you're a beginner or an experienced turner, you'll get great results from our Carbide Turning Tools.
  • SUITABLE FOR - Suitable for massive and small events, along with cards, Decorative items, sheets, and boxes. Unlike fluffing, you will find that the Rougher is a great method for forming the external area of the jar and transforming the particles on the rotor.
  • OUR TURNING SYSTEM INCLUDES - (1) 11.4 '' wood shank, (3) 7.2 '' shafts with 8 carbide cutting heads of the circle, square and diamond, carbide tipped and a T15 wrench, all packed in a presentation storage box.
Check Stock

Hurricane Turning Tools, HTT-102, High Speed Steel, 5/8\ Bowl Gouge (1/2\ Flute) for Woodturning

  • ✅ WOOD LATHE BOWL GOUGE Our wood lathe bowl tools have greatly simplified wood turning, This set of lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable, contains 3 separate bowl gouges, overall length is 22.5 inches each..
  • ✅ BLADE 9 inch/ 230mm, made from hardened and tempered high speed steel (HSS) that that will keep a sharpened edge about 8x longer than carbon steel and will give you years of use..
  • ✅ HANDLE 13.5 inch/ 340mm, Hard and Solid beech wood, Ergonomics design makes it more comfortable while doing turning job..
  • ✅ CONTENTS This lathe chisel set includes one piece of 1/4 inch, one piece of 3/8 inch and one piece of ½ inch bowl gauges-wood turning tool, packed in a wooden storage case..
  • ✅ SATISFACTION GUARANTEE Our number one priority is customer satisfaction! If you aren’t happy with our lathe bowl turning tools we offer a no questions asked, 100% money back guarantee..
Check Stock

Simple Woodturning Tools Carbide Wood Lathe Tool Mid Size Set of 5 with Solid Aluminum Beautiful Color-Coded Lathe Tool Handles Stainless Steel USA Made

  • Set of 5 professional carbide wood lathe tools are American made by Harrison Specialties in Ramsey, Minnesota, a family owned CNC machining and....
  • Simplify woodturning tool selection with beautiful color coded solid aluminum handles. Each CNC machined powdercoated turning tool handle is 1-1/8"....
  • Carbide woodturning tools feature ultra-sharp replaceable tips, which have multiple sides that can be rotated. Replacing or turning the cutters is....
  • Four included tools are designed with a 3/8" square shaft making it easy to keep tools flat on the tool rest. Overall turning tool length is 9". The....
  • Greatly simplifies woodturning with no need for any sharpening equipment..
Check Stock

FJL FORCE Lathe Tools Set of 4, Mirror Polishing Wood Lathe Tools Latest Version Carbide Lathe Tools, Carbide Turning Tools, with Diamond Round Square Carbide Inserts

  • 【PRODUTCS INCLUDE】 - Carbide lathe tools including:(1)11" handle(2)7.9" wood turning tools including square,round,diamond,rounded(3)easy to replace the cutting head of the T15 wrench,all parts are made of special hard sponge full fit wrapped and placed in a packaging box..
  • 【REFUSE TO LOOSEN】 - Some common wooden handle carbide lathe tools will feel a certain degree of looseness or even fall off at the connection between the handle and the tool bar after 25 to 30 days of use.In contrast,the high-quality aluminum alloy handle,stainless steel handle all-metal material,double insurance carbide turning tools fixing structure can free you from the worry of product sturdiness in full..
  • 【HIGH CUTTING EFFICIENCY】 - The sharp high-density tungsten lathe tools cutting edge allows you to confront the wood as if a hot knife cutting butter as simple and smooth,compared with other typical carbon and high-speed steel material cutting head more durable,if wood turning tools becomes dull,just use the included T15 wrench to change the blade direction,you will have a fresh,clean cutting edge again..
  • 【EASY TO CONTROL】 - Whether it is the frosted aluminum handle of the wood lathe ,or the high- speed steel material of the knife shank,the mirror polished f....
Check Stock

Easy Wood Tools Full-Size Easy Finisher (4200) Woodturning Tool with Round Cutter Scraper Chisel with Replaceable Carbide Insert

  • Ergonomic Hardwood Maple Handle: 18" Maple / Tool Bar: 1/2" x 8.5" / Overall length 24.5" / Max Reach: 4". Comes Mounted with a Ci0 Carbide Cutter.
  • Never sharpen again! When cutter dulls, loosen screw, turn cutter 1/4 turn for new sharp edge, tighten screw down and start turning! . Stays sharp many times longer than steel.
  • Optional Cutter Available: Ci0-NR Patented Negative Rake Round Carbide Replacement Cutter. Negative Rake Carbide Cutters are AWESOME for turning resins, acrylics and extreme hardwoods.
  • Easy Wood Tools have a lower cost of ownership due to all you need is a lathe and Easy Wood Tools.
  • no need to purchase expensive re-sharpening equipment, plus our tools will not get shorter like high-speed steel which will eventually need replacing. Our tools are also safer due to turning on centerline = no catches..
  • Designed and Manufactured 100% in the USA.
Check Stock

Carbide Inserts Dowel Maker Dowel Plate Wood Raw Materials Rods Wood Sticks Maker Dowel Round Bar Auxiliary Tool Metric 3 Holes 10mm 12mm 14mm

  • ROUNDING BAR TURINING TOOL: This is a turning auxiliary tools for turning square sticks to making round sticks applied to electric drills..
  • PACKAGE INCLUDES: Rounding stick turning jig*1, Blade*3, Wrench*1..
  • SIZE: The size is 3.5*2.5*13cm, and the three blades on the jig can be adjusted and fixed by a wrench..
  • HOW TO USE: Sharpen both ends of the square stick embryo, then fix the Rounding Bar Turning Tools on the work surface, and finally rotate the square stick embryo with the electric drill and pass through the hole on the jig..
  • APPLICATION: Turning aids jig are commonly used in woodworking activities to make wooden round bars with diameters of 10mm, 12mm, and 14mm..
Check Stock

Simple Woodturning Tools Carbide Lathe Turning Tool Set of 3 Full Size with 17 Foam Grip Handles USA Made

  • American Made Set of 3 Full Size Carbide Lathe Turning Tools with Color Coded Handles: Hollower, Detailer & Rougher.
  • 17" long solid aluminum foam grip tool handles are color coded for easy tool identification. Overall tool & handle length is 26.5"..
  • This set of carbide lathe tools is ideal for turners at any skill level. With carbide it's all turning and no sharpening so you can begin turning....
  • Each lathe tool is 1/2" square CNC machined by Harrison Specialties in Ramsey, Minnesota. These tools are designed to be kept flat on the tool rest....
  • Each lathe tool features a carbide tip with multiple sharp edges that can be rotated several times. A Torx star wrench is included..
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

Carbide Tipped Wood Turning Lathe Tools Set, 30' 4Pcs Upgrade Sharp Lathe Rougher Finisher Swan Neck Hollower Tools with Durable Free Combination Alloy Handle Include Round Square Inserts

  • 【High Efficiency Tool】MYKASEN lathe turning tools is developed for experienced or novice woodworkers. It can keep sharp for a long time. When the tool becomes dull, the tool can be replaced in just a few seconds, without the need to sharpen it. It is a high-efficiency tool..
  • 【Value Pack】The carbide turning tools set includes 4 types of tools (rough/detail/finishing/) to meet different grinding needs. Equipped with 1 handle and 1 extension handle at the same time, which can be used alternately. We also thoughtfully prepared a pair of protective gloves to ensure your safety during use..
  • 【Dimension and Material】Matched with 4Size Carbide Cutters Inserts(1pcs Square11 × 11 × 2.0mm-30°, 1pcs Round 12 × 2.5mm-30°, 1pcs Round 8.9 × 1.85mm-30°, 1pcs Diamond 10×30mm with Radius Point), We provide high-quality products, hard alloy blades, stainless steel rods, aluminum alloy handles and shells. Everything in this tool set is dynamic and reliable..
  • 【Interchangeable Grip Handle】We provide two smart and interchangeable handles. They can be used alone or connected together. The length of a single root is 280mm, and the combined length can reach 500mm. Clever design. However, for safety reasons, be sure to tighten the two tool rods before use..
Check Stock

Indexable Lathe Turning Tool,3/4'' Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • OSCARBIDE 1/2"Shank Heavy-Duty Lathe Turning Tools Set including 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning holder, 1 pcs MGEHR grooving tool holder,1 pcs SER threading tool holder.
  • Turning Holders are made of high quality stainless steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general metal lathe cutting tools.
  • Carbide Cutters are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose metal lathes cutting action.
  • Metal Lathe Cutting Tools Overall Length: 4.
Check Stock