ReviewsTurret Lathe Tool Holder

Basic Lathework for Home Machinists (Fox Chapel Publishing) Essential Handbook to the Lathe with Hundreds of Photos & Diagrams and Expert Tips & Advice; Learn to Use Your Lathe to Its Full Potential

  • ...Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
  • Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
  • Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
  • Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more..
Check Stock

Knurling Knurler Tool Holder 2cm/0.8inch Spring Loaded Holder Linear Knurl Tool Lathe Adjustable Shank with 4 Spare Knurling Wheels 45# Carbon Steel CR15 for 7X Mini Lathe

  • This knurling tool is made of high quality 45 # carbon steel, and the wheels are made of CR15, durable in use..
  • This knurling tool is specifically for the mini lathe..
  • Great design helps reducing the load on the lathe spindle bearings compared to any other standard knurling tool..
  • Pressure is applied via the turn screw instead of the lathe cross slide..
  • Knurling tool holder is also works with any of the quick change tool posts. This knurling tool fits in the standard tool post of the mini lathe without any modification..
Check Stock

Aloris Tool AXA-1S Oversized Turning and Facing Holder

  • OSCARBIDE 3/4" Heavy-Duty Lathe Turning tool set include 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning tools holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder.
  • Turning lathes Holders are made of high quality steel with Nickel Cotated, inserts are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use.
  • Used for semi-finishing/roughing steel,metal,Fit for Turning,grooving or threading.
  • Replacement cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it..
  • 7pcs lathe cutting holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Lathe Bar Replacement, High Grip Replacement MTNL 1616 H16 Turning Tool Holder 16x100mm Cast Iron Semi-Finishing for Lathe Turning Tool Finishing

  • Lathe Tool Holder--The accessories have good steel quality and long service life, which reduces the use cost of tools..
  • Lathe Turning Tools Holder--Maintaining tight tolerances, unmatched performance and practicality, can adapt to very harsh environments..
  • Carbide Lathe Tools Holder--High grip, impact resistance and powerful, fast cutting speed, large-scale processing..
  • Carbide Turning Tools Holder--User can easily replace the clamp, only need to use a wrench to complete the replacement of the blade and the pad..
  • Metal Lathe Cutting Tools--Original standard, direct replacement for the old or broken one..
Check Stock

5/8\ 2PCS CNC Lathe Carbide Indexable Threading Turning Tool Holder SER1616H16 + SEL1616H16 with 2PCS 16ER/IR AG60 BP010 Indexable Carbide Turning Insert Blade

  • PACKAGE INCLUDES : You will receive 1 pieces SER1616H16 5/8”/16mm shank diameter lathe turning tool holder , 1pcs SEL1616H16 5/8”/16mm shank diameter lathe turning tool holder,1pc 16ER AG60 threading carbide turning insert,1pc 16IR AG60 threading carbide turning insert and 2pcs T15 wrenches..
  • Material : The SER/L1616H16 5/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 3mm..
  • If you need more inserts,you can search for ASIN:B07FFR8K53(16ER AG60) or B07FFPFT93(16IR AG60) ..
Check Stock

Indexable Lathe Turning Tool,3/4'' Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • OSCARBIDE 1/2"Shank Heavy-Duty Lathe Turning Tools Set including 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning holder, 1 pcs MGEHR grooving tool holder,1 pcs SER threading tool holder.
  • Turning Holders are made of high quality stainless steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general metal lathe cutting tools.
  • Carbide Cutters are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose metal lathes cutting action.
  • Metal Lathe Cutting Tools Overall Length: 4.
Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

Threading & Tapping attachment-lathe tailstock die holder set MT3

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT3 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
Check Stock

4LIFETIMELINES Flaring Tool – Professional Turret Brake Line Flare Tool – 5 Tubing Sizes – Compatible with Stainless Steel Copper Coils

  • 5 TUBING SIZES: The 4LIFETIMELINES heavy duty turret brake line flare tool allows you to create 45 degree highly precise double, single and bubble flares in 5 sizes of tubing, 3/16″, 1/4″, 5/16″, 3/8″ and 4.75mm..
  • COMPATIBLE MATERIALS: This brake flaring tool can work with stainless steel, steel and nickel copper tubing, being a smart and practical solution for brake lines, fuel lines and transmission cooler lines..
  • EASY TO USE: Unlike similar products on the market, this professional flaring tool features a quick-release T handle ensuring fast holder die changeovers for a smooth and user-friendly experience..
  • CONVENIENT TURRET CARRIER: Keep all your dies ready, available and within immediate reach with the convenient turret carrier, which saves you the hassle of groping for small parts or losing them!.
  • PRECISION IS KEY: Keep your brake flares and brake system safe and at optimal length with this highly precise and accurate flaring tool, which requires minimal time, effort and cost!.
Check Stock

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
  • Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
Check Stock