ReviewsTurret Vertical Milling Machine

Samfox Ball Crank Table Handle - Machine Crank Handle for Bridgeport Milling Mill d26

  • Ball Crank Table Handle is safe and convenient to replace the handle.
  • Milling Machine Ball Handle is made of high hardness material, durable to use..
  • Three ball crank table handle for milling machine using..
  • D26 Ball Crank Table Handle is suitable for most milling machines.
Check Stock

LANTRO JS - D26 Ball Crank Table Handle, Milling Machine 3 Ball Crank Handle, Replace Handle for Bridgeport Milling Mill, 16mm Inner Hole Diameter

  • △Parameters: Whole Length: Approx. 197mm / 7.8in.
  • Inner Hole Diameter: Approx. 16mm / 0.6in.
  • △Premuim Quality: The crank handle is made of high hardness material, durable to use. The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use.
  • △Perfect Replacement:Three ball crank table handle for milling machine using, suitable for most milling machines and work benches.
  • △Comfortable Grip:The olive-shaped hand-held part of the three ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load.
  • △Easy Installation:Ball Crank Table Handle is safe and convenient to replace the handle.
Check Stock

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

  • ...--- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
  • ★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
  • ★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
  • ★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..
Check Stock

3 Axis DRO Digital Readout Magnetic Scale DRO Display Kit CNC Milling Lathe,DIY Travel Length

  • So you will have the follow product : A -----Aluminum profile 1pcs 1M and 2pcs 800mm , -Various assembly methods ,1 .you can cut it to 3pcs short scale 2. 1pcs long 1.8M and a short scale .That means the DIY kit can be widely for lathe machine .milling machine. B , 3pcs Magnetic Scale Sensor (reading head) 5um resolution , C. Magnetic Tape & Stainless Steel Strip -2.4M D,End cap - 3 Pair. E.All of accessory for mounting scale ( User Manual included ) . F Digital Readout 3 Axis DRO.
  • Why choose magnetic scale : Fully sealed redhead with perfect structure of the profile takes it match IP67 protection class ,life time is longer thna linear glass , baesd on we provide 5 years warranty.
  • High Performance- 3 Axis DRO Digital Readout can be widely used on the Milling Machine bridgeport milling machine,Lathe Machine /7inch LCD Screen DRO ,Easy for operation. Built-in User manual , freeing hands from paper manuals.
Check Stock

4" Cross Slide Drill Press Vise, Heavy Duty Cast Iron Milling Vice Holder Woodworking Clamping Vise Machine Bench Top Mount

  • 【Provide Strong Clamping Force】: Widened jaws of the cross slide drill press vise for stronger clamping force to keep workpiece more stable during machining.
  • 【Heavy Duty Construction】: Constructed of heavy duty cast iron, ensures high hardness and durability, hardened steel jaws on the cross slide milling vice holder add for extra durability and longevity.
  • 【Double Direction Design】: Features with double direction design, can move in horizontal and longitudinal for precise positioning, removable handle of the milling vice clamping machine for easy slide on and off.
  • 【Easy to Use】: There are several mounting holes on the bottom of drill press vice for convenient fastening firmly in position, provide great stability and easy to use.
  • 【Versatile Milling Vice Holder】: Hinged vise crank handles drops out of the way, designed for woodworking and metalworking, widely used in milling machine, drill press and machinery maintenance, etc.
Check Stock

3 Inch Cross Slide Drill Press Vise, Aluminum Alloy Milling Vice Holder Woodworking Clamping Vise Machine Bench Top Mount Cross Sliding Vise with Rotating Handle for Wood Working

  • 【Provide Strong Clamping Force】: Widened jaws of the cross slide drill press vise for stronger clamping force to keep workpiece more stable during machining, maximum jaw is 2.73in.
  • 【High Accuracy】: The handwheel has 0.1 mm increments marked by the machine for maximum accuracy. X direction adjustment is 80 mm. Y direction adjustment is 67mm.
  • Ergonomic handle of the milling vice clamping machine for easy slide on and off.
  • 【Heavy Duty Construction】: Drill press vice is constructed of high quality aluminum alloy, ensures high hardness and durability.
  • The gripper is equipped with a removable silicone pad, which can better protect the workpiece during operation.
  • 【Easy to Use】: With high-strength accuracy screw, the bench milling vice holder is not easy to slip or deform, provide great stability and easy to use, high working efficiency.
  • 【Versatile Milling Vice Holder】: 3 inch cross slide drill press vise is designed for woodworking and metalworking, widely used in milling machine, drill press and machinery maintenance, etc., great for home use or light professional use.
Check Stock

Fowler 52-720-000-0 Surface Finish Comparator Set 30 Specimens

  • SURFACE FINISH SPECIMENS: This surface roughness specimen set is ideal for checking, identifying, and specifying the degree of roughness of machine parts.
  • features 30 different specimens for flat lapping, reaming, grinding, turning, horizontal and vertical milling.
  • DIMENSIONS: The surface roughness specimens feature grade AA values displayed in microinch and micron values accurate to within ±12% of the nominal values.
  • each of the 30 specimens made of electro-formed solid nickel is 0.875" by 0.375" in size.
  • EASY COMPARISON: Each type of surface finish is accurately and consistently reproduced to give the operator a realistic idea of the feel, appearance, and texture of the machined components.
  • they can be easily compared with a loupe or by utilizing the scratch test.
  • COST-EFFECTIVE CHECKING: Eliminates costly checking methods, saves time, reduces the production of scrap caused by poor finishes.
  • SET INCLUDES: This roughness specimen set includes a vinyl wallet and instructions.
Check Stock

Blue Eyed Salaryman: From world traveller to lifer at Mitsubishi

  • R8 to 3/4" Weldon Shank Arbor for Milling Machine, with Coolant System.
  • For Drill Use Annular Cutters on Bridgeport Milling Machine.
  • Fit with Any Size Annular Cutters which Have 3/4'' Weldon Shanks.
Check Stock

Grizzly Industrial G0765-7" x 14" Variable-Speed Benchtop Lathe

  • R8 to 3/4" Weldon Shank Arbor for Milling Machine, with Coolant System.
  • For Drill Use Annular Cutters on Bridgeport Milling Machine.
  • Fit with Any Size Annular Cutters which Have 3/4'' Weldon Shanks.
Check Stock

Lenink 4 Pack Mini T Track Hold Down Clamps, T-Track Clamp Compatible with 3018-PRO,3018-MX3,3018-PROVer,1810-PRO CNC Router Machine

  • Compatibility: The T-Track clamp kit is compatible with 3018-PRO/3018-MX3/3018-PROVer/1810-PRO CNC router machine, it can hold most of the materials of a desktop CNC router machine.
  • Portable and Practical: Adjustable T Track hold down clamps are very easy to install, can accommodate 30mm materials and hold them firmly in place.
  • Wide Range of Use: Not only suitable for 3018 series desktop CNC router machines, but also suitable for positioning and fixing other woodworking or metalworking, such as drill presses, CNC, table saws, routers, jigs, vertical milling machines, etc.
  • Strong and Sturdy: Made of high quality zinc-aluminum alloy, strong and wear-resistant, long service life.
  • Packaging Includes: 4 Pcs T-Track hold down clamps (Need to assemble by yourself). 6 months super long warranty period.
Check Stock

ATLIN Vise Jaws 6' - Nylon, Non Marring Soft Jaws - Multi-Purpose Design for Woodworking, Jewelry Making, Plumbing

  • Non-marring – The vise jaws are made from a tough, but soft nylon. ATLIN 6in vise jaw pads will never mar or damage any of your project materials.
  • Easy Install – The soft jaws attach to your vise with 3 neodymium magnets.
  • Grooved Design – The 6 inch vise inserts feature a multi-purpose design which is ideal for, woodworking, jewelry making, threaded items, pipe, tubing, AN fittings.
  • Universal Compatibility – ATLIN vice jaws are compatible with any 6" milling vise, machine vise, drill press vise, bench vise.
  • Sizing & Specs – vise jaws measure 6" in length, Groove sizes: 3/8" @ 60° angle | vertical grooves: 1/4", 1/8", 1/16" 5/8" | horizontal groove: 1/4" – See second photo for further details.
Check Stock