ReviewsTv Power Bridge

Wireless Bridge,UeeVii CPE-452 Point to Point 5.8G Long Range Outdoor WiFi CPE with 14DBi High-Gain Antenna,24V PoE Adapter,2 LAN Port,for Network and Surveillance Range Extension,2-Pack

  • UeeVii CPE-452 is an outdoor high power and 5.8G high-performance wireless bridge, that supports point to point and point to Multi-Point wireless connections. Pairing can be done by dialing without having to access the GUI, making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional, and saving much human work and cost..
  • CPE-452 WiFi bridge built-in 14Dbi high-gain antenna enables the transmission rate between 2 wireless bridges to reach 300Mbps, the highest wire network speed that can be achieved max is 100Mbps. To achieve the bridge function, one needs to act as a receiver and the other one as a transmitter..
  • Point to point wireless bridge can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM. Trees will not block the transmission speed of the point-to-point internet wireless bridge, suitable for shop warehouses or garages next to your house..
  • Point-to-point bridge easily helps you expand the network range to the second building(barn, shop, warehouses, garages), or wireless extend the IP camera monitoring range. IP65 Level weathe....
Check Stock

Gemini Sound XGA Series Amplifiers (5000)

  • CLEAN AND DEPENDABLE AMPLIFICATION: This Gemini XGA-5000 Professional Power Amplifier Provides Clean and Reliable Amplification Without Any Clipping, Featuring a Rugged Design with 5000 Watts of Peak Power..
  • PERFECT DIMENSIONS: The Power Amplifier Measures 8” inches L x 5” inches W x 12” inches H and Weighs 25.3 lbs. Made of Durable and Lightweight Metal Chassis..
  • RUGGED DESIGN: Features a Durable Metal Construction with Safety Thermal and Short Circuit Protection for Reliability Even on Adverse Conditions on the Stage. Comes with Front-to-Rear Airflow Fans..
  • EXTREME PERFORMANCE: Features A Frequency Response Of 10Hz-50kHz at 1.5dB, Total Harmonic Distortion of Less Than 0.1%, and Input Sensitivity and Impedance of 0.77v. This is Designed to Deliver Pure and Consistent Wattage Everytime..
  • Features XLR and 1/4-inch Jack Balance, Stereo and Mono Bridge, Comprehensive Front Panel Indicators (Including Signal, Clip, Protect, and Bridge), and a Bridge Control Switch..
Check Stock

Gemini GPA-2500 3000W Professional DJ Power Amplifier

  • CLEAN AND DEPENDABLE AMPLIFICATION: This Gemini GPA-2500 Professional Power Amplifier Provides Clean and Reliable Amplification Without Any Clipping, Featuring a Rugged Design with 2000 Watts of Peak Power..
  • PERFECT DIMENSIONS: The Power Amplifier Measures 8” inches L x 5” inches W x 12” inches H and Weighs 17.6 lbs. Made of Durable and Lightweight Metal Chassis..
  • RUGGED DESIGN: Features a Durable Metal Construction with Safety Thermal and Short Circuit Protection for Reliability Even on Adverse Conditions on the Stage. Comes with Front-to-Rear Airflow Fans..
  • PURE PERFORMANCE: Features A Frequency Response Of 10Hz-50kHz at 1.5dB, Total Harmonic Distortion of Less Than 0.1%, and Input Sensitivity and Impedance of 0.77v. This is Designed to Deliver Pure and Consistent Wattage Everytime..
  • Features XLR and 1/4-inch Jack Balance, Stereo and Mono Bridge, Comprehensive Front Panel Indicators (Including Signal, Clip, Protect, and Bridge), and a Bridge Control Switch..
Check Stock

Gemini GPA-6000 5000W Professional DJ Power Amplifier

  • CLEAN AND DEPENDABLE AMPLIFICATION: This Gemini GPA-6000 Professional Power Amplifier Provides Clean and Reliable Amplification Without Any Clipping, Featuring a Rugged Design with 5000 Watts of Peak Power..
  • PERFECT DIMENSIONS: The Power Amplifier Measures 8” inches L x 5” inches W x 12” inches H and Weighs 25.3 lbs. Made of Durable and Lightweight Metal Chassis..
  • RUGGED DESIGN: Features a Durable Metal Construction with Safety Thermal and Short Circuit Protection for Reliability Even on Adverse Conditions on the Stage. Comes with Front-to-Rear Airflow Fans..
  • EXTREME PERFORMANCE: Features A Frequency Response Of 10Hz-50kHz at 1.5dB, Total Harmonic Distortion of Less Than 0.1%, and Input Sensitivity and Impedance of 0.77v. This is Designed to Deliver Pure and Consistent Wattage Everytime..
  • Features XLR and 1/4-inch Jack Balance, Stereo and Mono Bridge, Comprehensive Front Panel Indicators (Including Signal, Clip, Protect, and Bridge), and a Bridge Control Switch..
Check Stock

VONETS WiFi Bridge 2.4GHz Wireless Ethernet Bridge Signal Repeater WiFi Hotspot with 5V/2A USB Power Adapter RJ45 to WiFi Convert for DVR, Monitoring, IP Printer, Network Device VAP11G-300

  • 【WiFi Bridge/Repeater】Industrial mini 2.4GHz WiFi Bridge Repeater Wireless Ethernet Bridge RJ45 to WiFi Adapter WiFi Hotspot Signal extend cover.
  • can achieve Wireless to Wired or Wired to Wireless function (WiFi to Ethernet or Ethernet to WiFi convert).
  • support WiFi 802.11b/g/n, WiFi rate:300Mbps..
  • 【Multiple Application Methods】WiFi Bridge: can smart control the device's WiFi mode ( IP layer or MAC layer transparent transmission).
  • WiFi Repeater (extend the distance of WiFi transfer).
  • WiFi Access Point hotspots. One 10/100Mbps adaptive Ethernet port (one 30cm cable with 1 male DC port and 1 male USB port)..
  • 【Connect Wired Device to WiFi】Good Partner for monitoring, electronic scales, DVR, IP camera, medical devices, IoT devices, video transmission, Industrial PLC, AGV, PS3, Network Printer, Robot and more Network devices and applications. Point-to-Point Transmission: maximum can be up to 80 meters when without obstacle and small data, then less than 50 meters when used for video transmission..
  • 【Power&Parameters】USB or DC optional powered mode, powered by wide voltage DC5V-15V(Typical Standard 5V/2A, ripple less than 100mV), With a 5V/2A USB power supply adapter.
  • the average power consumption is less than 2.5W.
Check Stock

Amped Wireless ProSeries High Power AC1750 Wi-Fi Range Extender / Bridge REB175P

  • Blazing-fast AC1750 Wi-Fi speeds provide Fast data transfers and seamless streaming.
  • Get better Wi-Fi coverage with 12 high power amplifiers and 3 high gain antennas.
  • Multiple operational modes: range extender, firewall range extender, network Bridge, and WDS-Bridge.
  • Each extender/Bridge supports 100 users and 30 Wi-Fi networks with unique security Features.
  • Power over Ethernet and magnetic mounting brackets make Installation Easy.
Check Stock

3pcs 24-Pin ATX Power Supply Jumper Bridge Connector PSU Tester

  • 24 Pin EPS / ATX power supply jumper bridge tool is compatible with 24/20 pin connector..
  • 24 Pin psu jumper bridge connector plug can run and start up any EPS / ATX power supply by its self..
  • 24 Pin power supply jumper is using Standard 18AWG UL1007 cable for reliability in long use..
  • Often used when assembling/testing liquid cooling systems, hard drives, fans, testing lights, BTC Miners or the power supply itself..
  • What You Get: 3x 24-Pin power supply jumper,.
Check Stock

Wireless Bridge Point to Point for 3KM Remote Transmission,Outdoor CPE PtP & PtMP with 14dBi High-Gain Antenna, 10/100Mbps Ethernet Port, 24V PoE, 2 Pack, for WiFi Extend/Surveillance Cameras

  • Better Wireless Signal Transmission and Reception: 5.8G long range wifi extender outdoor wireless bridge better than traditional CPE, the Ethernet physical rate is 10/100Mbps, Built-in 14dBi directional antenna can significantly improve the transmission and reception performance of wireless signals.
  • Easily Setup & Energy Efficient: The WIFI bridge is already paired, no manual pairing is required. Connect POE/DC power supply and you're ready to go. Our "wireless bridge kit" is adopting low power consumption design, supports dynamic MIMO power saving mode and 24V POE / 12V DC power supply, With US standard POE power plug and POE cable, suitable for North America.
  • Support WISP(Client + Router) & AP Modes: One works as AP mode and another works as Station mode to create a long distance point-to-point, point-to-multipoint wireless connection for CCTV surveillance and data transmission. Connect wirelessly to WISP station or hotspot to share the Internet over a local wired and wireless network. Dual modes solves the problem of long-distance signal transmission and makes you share the stable internet signal with your family or friends.
Check Stock

Ueevii 5.8G Point to Point Wireless Bridge CPE452&2 * 1-Pack Wireless Bridge Bracket Mount 360°Adjustment

  • UeeVii CPE-452 is an outdoor high power and 5.8G high-performance wireless bridge, that supports point to point and point to Multi-Point wireless connections. Pairing can be done by dialing without having to access the GUI, making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional, and saving much human work and cost..
  • Stainless steel material: The bracket is made of high-quality stainless steel, which has the characteristics of strong and sturdy, corrosion resistance, high temperature resistance, waterproof and lightning protection.
  • CPE-452 WiFi bridge built-in 14Dbi high-gain antenna enables the transmission rate between 2 wireless bridges to reach 300Mbps, the highest wire network speed that can be achieved max is 100Mbps. To achieve the bridge function, one needs to act as a receiver and the other one as a transmitter..
  • 360°adjustment: There are many small holes on the wireless bridge bracket plate, you can adjust it for 360°, which can easily meet your installation needs at any angle.
  • Point to point wireless bridge can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual....
Check Stock

Large Current 50A H-Bridge High-Power Single-Channel Motor Driver Module Semiconductor Refrigeration

  • 【H-bridge Driver Module】The drive uses a full H-bridge driver module full-bridge MOSFET driver chip and composed with very low internal resistance and high current. MOSFET H-bridge driver circuit, with strong drive and braking effect, signal isolation chip isolates motor drive effectively..
  • 【Effective Protection】With the microcontroller PWM signal isolation, effectively protect microcontroller..
  • 【Input Maximum】To achieve the motor forward and reverse rotation, two PWM input maximum 200kHz frequency..
  • 【Fully Compatible】Power indicator is schematically clear. The power supply voltage 5V to 15V. 3.3V to 12V, PWM level is fully compatible. High current 50A..
  • 【Warm Tips】Ffor your safety and protection of use, our product is tested to ensure trouble-free installation and performance, please rest assured to buy..
Check Stock

ZJchao Nose Up Lifting Shaping Clip Electric,Vibrating Massager Nose Shaping Bridge Shaper Lifter Beauty Tool

  • UNIQUE DESIGN:unique structure, consist of nose bridge vibration part and nose holder, which effectively make nose bridge higher.
  • SAFE AND SIMPLE:electric lifting nose up clip helps shape and lift your nose without the need for expensive plastic surgery, no worry of fail.
  • HIGH QUALITY:made of high quality of environmental and healthy silica gel,elastic resin and stainless steel with considerate shape fit your nose. Comfortable and will not damage your nose.
  • SHAPING THE HIGH NOSE BRIDGE:Physical way to help shape and lift your nose, and it also has the effect of nose correction,the face instantly becomes delicate and stereoscopic.
  • ANYTIME & ANYWHERe HELP YOU:small and easy to carry, simple and easy to operate, it is the beginning of your beauty,you can take it while watch TV, work, do household chores, without any impact, and shaped your nose all the time.
Check Stock