ReviewsTweeter Wire

2 Pairs Rockville RV68.2C 6x8/5x7 Component Car Speakers 1800 Watts/340w RMS CEA

  • Includes: (4) 6x8 speakers. (4) tweeters. (4) Crossovers. (4) Grills. Flush and surface Mounting accessories. Speaker wire. Features: Rockville....
  • Flex Motion Butyl Rubber Surround. 1.2 PEI dome tweeter with ferrite magnet give amazing highs. Flush and surface mounting tweeter options. Fine-tuned....
  • Crossover will cut anything higher than 3.5 Khz @ 12 dB / octave slope from the woofers. Sensitivity: 91 dB @ 1w/1m. Mount depth: 2.52". Impedance: 4....
  • Magnet dimensions: 90mm x 15mm. Fs: 65.102 hz. Re: 3.6 OHM. Qes: 1.663. Qts: 1.173. Qms: 3.977. Fits 6x8 and 5x7 openings. Top mounting depth of....
Check Stock

Disc Jockey Traditionals 11 CD Set New & SEALED

  • Traditional passive loudspeakers - passive old school speaker design, Simply drive power from your amplifier or receiver. Full range sound coverage with 2-way tweeter and woofer configuration and internal crossover wiring system.
  • High quality - deluxe 8" Woofer with polymer Treated Cone, 2. 5" X 5. 5" Wide dispersion horn tweeter, banana Plug and raw speaker wire inputs.
  • Portable and durable - high quality CARB compliant MDF wood cabinet with grey aviation grade Carpet, metal mesh grill and protective corners. (H x W x D) 16" X 10" X 9. 25", 45hz-30 kHz with 87dB at 8ohm.
  • System requirements - any amp or receiver with raw speaker wire or 1/4 inch jack outputs, power from your amp should be no less than 10 and no more than 300 watts per Channel, cables to connect your amp to the speakers. Use for DJ, PA, Karaoke and live stage.
  • What's in the box - 2 Goldwood DPI-800C/8 passive speakers, instruction manual.
Check Stock

Rockville Pair RV68.2C 6×8 / 5×7 Component Speakers+6×8 Coaxial 3-Way Speakers

  • Package Includes: (1) Pair of RockvilIe RV68.2C 6×8 / 5×7 Component Car Speakers 900 Watts/170w RMS CEA. (1) Pair of RockvilIe RV68.3A 6×8″ 3-Way Car Speakers 900 Watts/170 Watts RMS CEA Rated. Includes: (2) 6×8 speakers. (2) tweeters. (2) Crossovers. (2) Grills. Flush and surface Mounting accessories. Speaker wire. Features: RockvilIe RV68.2C 6×8 and 5×7 Component car speakers (pair). Peak Power Rating: 900 Watts per Pair / 450 Watts Each.
  • CEA Compliant RMS Rating: 170 Watts per Pair / 85 Watts Each. Injection Molded Polypropylene woofer cone gives amazing bass and mids. Flex Motion Butyl Rubber Surround. 1.2 PEI dome tweeter with ferrite magnet give amazing highs. Flush and surface mounting tweeter options. Fine-tuned 2-Way Crossover, 12db/Octave Roll Off. Ferro Fluid Cooled Tweeter Magnet. Steel high quality basket. Rubber magnet boot cover. Frequency response: 32-22,000 Hz.
  • Crossover will cut anything lower than 3.5 Khz @ 12 dB / octave slope from the tweeters. Crossover will cut anything higher than 3.5 Khz @ 12 dB / octave slope from the woofers. Sensitivity: 91 dB @ 1w/1m. Mount depth: 2.52″. Impedance: 4 Ohm. Grilles included. Aluminum voice coils. 100% oxygen free copper voice coil windings. Black electro-plated T-yoke and washers. C....
Check Stock

1.5” Audio Car Tweeter Speaker - Aluminum Die-Cast Frame, 500 Watt Peak, 2 kHz - 25 kHz Frequency Response, 4 Ohm, Heavy Duty 30 oz. Magnet Structure - Pyle PDBT31 SILVER

  • 2 kHz - 25 kHz FREQUENCY RESPONSE: Pyramid’s 1'' car tweeter speaker has enhanced Ferrofluid and 2 kHz - 25 kHz frequency response that will complete a sound system of a car or woofer enclosure.
  • 500 WATT POWER: This bullet horn super tweeter speaker provides up to 500 watts peak power because it is equipped with 30 oz magnet structure. It's all housed in heavy duty aluminum housings.
  • 4 OHM IMPEDANCE: This car tweeter has 4 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this set with a 1” audio tweeter plus an aluminum frame. The heavy duty housing and structure provides a strong foundation.
  • SENSITIVITY: This titanium super tweeter is very easy to install with a capacitor crossover network and hardware. The sensitivity is 106dB and weighs 3.4 lbs.
Check Stock

Goldwood DJ Speakers (DPI-800C/8)

  • Traditional passive loudspeakers - passive old school speaker design, Simply drive power from your amplifier or receiver. Full range sound coverage with 2-way tweeter and woofer configuration and internal crossover wiring system.
  • High quality - deluxe 8" Woofer with polymer Treated Cone, 2. 5" X 5. 5" Wide dispersion horn tweeter, banana Plug and raw speaker wire inputs.
  • Portable and durable - high quality CARB compliant MDF wood cabinet with grey aviation grade Carpet, metal mesh grill and protective corners. (H x W x D) 16" X 10" X 9. 25.
Check Stock

2\ Inch Titanium Horn Driver - 600W High Power Car Audio Midrange/Tweeter Compression Horn Driver System w/ Aluminum Voice Coil, 1.5kHz ~ 18kHz Frequency,102dB, 8 Ohm, 13.5oz Magnet - Pyle PDS541

  • 600 WATT POWER: This high powered audio projection midrange/tweeter system has a maximum power output of 600-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 1.5kHz-18kHz FREQUENCY RESPONSE: The car tweeter compression driver has a frequency response of 1.5kHz ~ 18kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction. Fits horns w/ 1 3/8" x 18 TPI threads.
  • 8 OHM IMPEDANCE: This car tweeter has 2" flat aluminum voice coil, 102dB @ 1W/ 1M, & 8ohm impedance rating that compensates the undersized wire found in most cars. Reduces distortion so you can enjoy crisp & clear sound.
  • 2” TITANIUM DIAPHRAGM: PylePro follows the standard size for most car stereo systems & created this midrange/tweeter compression horn driver with 2-inch titanium diaphragm. This high power tweeter compression horn will get you higher than high.
  • 60 OZ MAGNET STRUCTURE: These tweeters have a 60 oz magnet structure. The heavy-duty housing provides a strong foundation & is easy to install to your car's sound system. Provides crispest, most accurate highs possible w/ modern speaker technology.
  • Midrange/Tweeter compression horn driver.
Check Stock

Pyramid 1 Audio Car Tweeter Speaker - Aluminum Die-Cast Frame 300 Watt Peak 2k-20kHz Frequency Response 4 to 8 Ohm Heavy Duty 30 oz Magnet Structure - 1 Tweeter - Pyramid TW44 Black One Size

  • 2k-20kHz FREQUENCY RESPONSE: Pyramid’s 1'' car tweeter speaker has enhanced Ferro fluid and 2k-20kHz frequency response that will complete a sound system of a car or woofer enclosure.
  • 300 WATT POWER: This bullet horn super tweeter speaker provides up to 300 watts peak power because it is equipped with 30 oz. magnet structure. It's all housed in heavy duty aluminum housings.
  • 4-8 OHM IMPEDANCE: This car tweeter has 4 to 8 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this set with a 1” audio tweeter plus an aluminum frame. The heavy duty housing and structure provides a strong foundation.
  • 1 Tweeter comes with all the necessary which are very to install with a capacitor crossover network and hardware. The sensitivity is 104dB and weighs 2.71 lbs.
Check Stock

Audiobank AB-TW220 3.75 inch 600 Watt Car Audio Heavy Duty Compression Super Horn Tweeter/Die cast Aluminum Frame/Frequency Response: 2000 Hz - 20000 Hz

  • 300 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 300-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2 kHz - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker is ferrofluid enhanced and has a frequency response of 2k-25kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 OHM IMPEDANCE: This car tweeter has 96 dB SPL and 4/8 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this tweeter with 3.25" aluminum bullet horn w/1 inch super titanium tweeter. The heavy-duty housing and structure provides a strong foundation.
  • COMPLETE PAIR: This complete set includes a pair of aluminum die-cast super titanium tweeters with 30 oz magnet structure, capacitor crossover network, and mounting hardware which are very easy to install.
Check Stock

4x10 Inch Horn Tweeter Speaker - Heavy Duty 200 Watt High Power Horn Audio Tweeter System w/ 25mm Voice Coil, 20 Oz Magnet Structure, 102 dB, 8 Ohm Impedance - Pyle PH391

  • 200 WATT POWER: This high powered audio projection horn tweeter system has a maximum power output of 200-watt peak power so you can play your favorite tracks as loud as you want and with style.
  • 1kHz - 15 kHz FREQUENCY RESPONSE: This car horn tweeter speaker has a frequency response of 1kHz - 15 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
  • 8 OHM IMPEDANCE: This car tweeter has 102dB/w/m sensitivity and 8-ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 25mm VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 4” x 10” horn car audio tweeter speaker with 25mm voice coil size.
  • 20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. It is super easy to install in your vehicle’s sound system. Total dimension measures 4.3” H x 10.6” W x 8.25” D.
Check Stock

DS18 EN2T High Density Abs Universal A Pillar Pod 2 X 1 Tweeters (No Tweeters)

  • 300 Watt power: This high powered audio projection tweeter system has a maximum power output of 300 Watt peak power/ 150 Watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2kHz - 25 kHz frequency response: This car tweeter speaker is Ferro fluid enhanced and has a frequency response of 2kHz - 25 kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 Ohm Impedance: this car tweeter has 1” high temperature Kapton voice coil, 98 dB SPL and 4-8 Ohm Impedance Rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • Standard SIZE: Pyle Pro follows the standard size for most car stereo systems and created this 1 inch super titanium car audio tweeter speaker with 3.75 inch aluminum Bullet horn and has a 3.75” diameter and 2” mounting depth.
  • Strong structure: This pair of tweeters have 20 oz Magnet structure and comes with a Mylar capacitor Crossover network. The heavy duty housing and structure provides a strong foundation and it is super easy to Install.
Check Stock

3 Car Audio Speaker Tweeter - 1000 Watt High Power 3 Inch Super Titanium Tweeter System w/ Die Cast Aluminum Frame, 2k - 25 kHz Frequency, 109 dB, 4-8 Ohm, Heavy Duty 100 oz Magnet - Pyramid TW57

  • 1000 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 1000 watt peak power / 500 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • 2k - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker is ferro fluid enhanced and has a frequency response of 2k-25kHz that will complete your current car woofer enclosure system for full range stereo sound reproduction.
  • 4-8 OHM IMPEDANCE: This car tweeter has 109 dB SPL and 4-8 ohm impedance rating that compensates the undersized wire found in many of todays cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • STANDARD SIZE: Pyramid follows the standard size for most car stereo systems and created this 3-inch super titanium car audio speaker tweeter w/ high temperature voice coil, die cast aluminum frame, and has a 5" diameter / 2 mounting depth.
  • STRONG STRUCTURE: This complete tweeter has a 100 oz magnet structure and comes with a crossover capacitor. The heavy duty housing and structure provides a strong foundation and it is super easy to install.
Check Stock