ReviewsTwist Tight Fasteners

TEKTON 3/8 Inch Drive Deep 12-Point Socket Set, 15-Piece (1/4-1 in.) | SHD91115

Includes 15-pc. 3/8 in. drive deep 12-point sockets: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in..
12-point opening fits double hex (12-sided), hex, and square-shaped fasteners.
Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
Deep-length sockets reach into wells and accommodate the excess threads of longer shafts.
Extra-large die-stamped size markings are easy to read and can’t wear off.
Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
Four detent grooves provide a secure connection with the drive tool.
Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
Twist-to-Lock Socket Rail organizes and securely holds sockets in place, both for in your toolbox and on the go.

Check Stock

Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner

Powerful motor penetrates fasteners through the hardest materials.
Shoots fasteners up to 1-3/8-inch length easily, even-inch hardwoods.
Patented design eliminates need to adjust for different fastener lengths.
Double trigger safety prevents accidental firing of tool.
Narrow nose reaches tight areas and corners for detailed trim work.

Check Stock

SATA 1/4-Inch Drive 72-Tooth Quick-Release Ratchet with a Teardrop Head, Polished Chrome Finish - ST11971U

HIGH-QUALITY TOOL: SATA 1/4" drive ratchet is perfect for tightening or loosening small fasteners.
INCREASED PRODUCTIVITY: 5° ratcheting arc allows you to turn fasteners in tight spaces.
FAST ENGAGEMENT: 72-tooth ratchet supports tighter turns and quickly engages fasteners.
HASSLE-FREE DESIGN: Teardrop, low-profile head offers better access, while a flush-mounted switch lets you single-handedly change directions.
Quick-release function makes switching between sockets a breeze.

Check Stock

Lug Nut Remover 6 Pieces Twist Socket Set Extractor Tool Metric Bolt and Lug Nut Extractor Socket Tools

【TIGHT GRIP AND BIT】The plum-shaped internal thread design provides excellent torque and can rotate deep-studded fasteners. The unsmooth concave wall inside is more conducive to the grabbing of the stubborn nut and easy to remove..
【Excellent Torque &Tight Grip】This stripped lug nut removal tool is in plum-shaped internal thread design provides excellent torque.
The unsmooth concave wall inside is more conducive to firmly wheel lock and quickly remove the worn lock bolt and rusted, damaged lug nut with less effort.
【Center Punch Bar】A hex top on the extractor makes it easy to use a wrench instead of a ratchet. The extractor may bite together with the broken bolt. After removing it, please use the center punch to knock the bolt off the extractor..
【Multi-Application】17mm, 19mm, 21mm,22mm 27mm and 5 different size nut extractors and an extra metal rod can meet the various needs of the usual needs, they easily pop a removed nut from your extraction sockets, whether it is car repair, remove damage nuts, can provide you with Great convenience..
【BUILT TO LAST】The hardened alloy steel provides this twist socket lug nut remover set with maximum strength and durability.
Black oxide finish resists rust and corrosion.

Check Stock

push pin pliers, heavy duty push pin pliers push pin pliers-30 Degree Push Pin Remover Tool Pliers for Retainer & Anchor Removal

[Perfect Design and Easy To Use]- 30 and 80-degree spring-loaded design allows you to safely remove push pin style fasteners without damaging the surround trim and fasteners, and the ergonomic handle prevents hand fatigue during long term use..
[Reliable and Efficient]- Do not waste your time by using a screwdriver that damages your vehicle, Push Pin Removal Pliers Set is designed to work in tight spaces to enable you to remove those center locking pin style fasteners with ease..
[Widely Applications]- Our push pin pliers work on anchors that are found in many makes and models including , , , , , and many other late model vehicles..
Push Pin Removal Pliers Set is the perfect tool for removing center locking pin style fasteners..
If you have any questions, our customer service will reply to you within 24 hours..

Check Stock

SATA 3/8-Inch Drive Quick-Release 72-Tooth Ratchet with an Teardrop Head, Full-Polished Chrome Finish - ST12971U

[PROFESSIONAL-GRADE TOOL] SATA 3/8-inch drive ratchet is ideal for tightening or loosening small to large fasteners.
[INCREASED PRODUCTIVITY] 5° ratcheting arc allows you to turn fasteners in tight spaces for maximum productivity.
[FAST ENGAGEMENT] 72-tooth ratchet supports tighter turns and quickly engages fasteners.
[HASSLE-FREE DESIGN] Teardrop, low-profile head offers better access, while a flush-mounted switch lets you single-handedly change directions.
[QUICK-RELEASE] Quick-release function makes switching between sockets a breeze.

Check Stock

Brewing Trouble: A Paranormal Women’s Fiction Novel (Crow’s Feet Coven Book 2)

【HIGH QUALITY MATERIAL】The material of the crowfoot wrench is carbon steel, heat-treated, chrome-plated surface. The material of the ratchet handle is carbon steel, heat-treated, knurled, electroplated, round head handle..
【SPECIFICATION】3/8” Square drive open end crows foot wrenches – Sizes included (SAE/Standard): 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 ”..
【EXTEND YOUR REACH】These handy problem solvers give you more options when you are trying to get at fasteners in tight awkward spaces..
【EASY STORAGE】Mounted on a convenient storage rail. Each wrench size is permanently stamped for simple identification..
【WIDE APPLICATION】Crow’s feet wrench adapters speed up installations & removals fitting perfectly on any 3/8” drive ratchet extension or torque wrench reaching inaccessible fasteners that sockets can’t get to – Great for car automotive & truck work in tight engine/radiator areas like o2 sensors or for underneath sink/toilet work like faucet spray hoses..

Check Stock

TEKTON 1/2 Inch Drive Deep 12-Point Socket Set, 26-Piece (3/8-1 in, 10-24 mm) | SHD92204

Includes 11-pc. 1/2 in. drive deep 12-point sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in..
15-pc. 1/2 in. drive deep 12-point sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm.
12-point opening fits double hex (12-sided), hex, and square-shaped fasteners.
Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
Deep-length sockets reach into wells and accommodate the excess threads of longer shafts.
Extra-large die-stamped size markings are easy to read and can’t wear off.
Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
Four detent grooves provide a secure connection with the drive tool.
Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
Twist-to-Lock Socket Rail organizes and securely holds sockets in place, both for in your toolbox and on the go.

Check Stock

ABN Right Angle Cutting Pliers - Spring Loaded Flush Cut Pliers for Automotive or Crafting - Car Push Retainer Rivet Trim Clip Wire Cutting Tool

These pliers feature a superior long reach design for work in confined areas.
[Perfect Design and Easy To Use]- 30 and 80-degree spring-loaded design allows you to safely remove push pin style fasteners without damaging the surround trim and fasteners, and the ergonomic handle prevents hand fatigue during long term use..
[Reliable and Efficient]- Do not waste your time by using a screwdriver that damages your vehicle, Push Pin Removal Pliers Set is designed to work in tight spaces to enable you to remove those center locking pin style fasteners with ease..
[Widely Applications]- Our push pin pliers work on anchors that are found in many makes and models including , , , , , and many other late model vehicles..
Push Pin Removal Pliers Set is the perfect tool For removing center locking pin style fasteners..

Check Stock

GEARWRENCH Teardrop Ratchet

120XP ratchets have two double stacked 60 tooth pawls (120 positions) providing a 3° swing arc so you can turn fasteners in tighter confines.
Double-stacked pawls alternately engage the 60 tooth gear, providing exceptional strength.
Highly visible on/off markings on the head for fast size identification.
Enclosed head design for extreme resistance to dirt infiltration.
Teardrop, low-profile head and flush-mounted on/off switch allow better access in tight spaces.
Longer reach handle to access hard-to-reach fasteners.
Bright, full polish chrome finish easily wipes clean and resists corrosion.

Check Stock

Grex P650L 23-Gauge 2-Inch Headless Pinner with Lock-Out

Lock-out mechanism that prevents dry-firing of tool.
Shoots fasteners up to 2-inch length easily, even in hardwoods.
Patented magazine design eliminates need to adjust for different fastener lengths.
Powerful motor penetrates fasteners through the hardest materials.
Narrow nose reaches tight areas and corners for detailed trim work.

Check Stock