ReviewsTwo Injection Mold

Soft Plastiс Mold Lure Making Injection Molds Fishing Lures C138

MATERIAL: Enginered stone. Stone powded mixed with polymers to create a low-porous and durable material, which is a perfect fit for soft plastic lure molds..
INJECTION: Standart 5/8". This size unsures compatibility with most injectors..
LUBRICATION: Recommended. For best results use silicone grease..
DETAILED BAIT DESIGN . Fine level of detail comparable with aluminium molds and far better than sikicone molds..
SMART AIR VENTS design to release air and make sure that soft plastic fills all details of the mold..
Using only one lure mold and different additives you can make a soft plastic lure kit such as ice fishing lures, saltwater lures, freshwater lures, bass lures, etc..

Check Stock

Dilwe Simulation Universal Tail Wing, Model Accessory Plastic Tail Wing Decoration for 1/10 Scale Drifting RC Car

Function: This tail can not only decorate your remote control car, but also effectively reduce the air resistance of the remote control car during fast driving..
High-quality Materials: This product is a high-quality mold injection molding, sturdy and durable, is the perfect choice for decorative your remote control car..
Easy Installation: The product includes a wing, two bases and four screws for easy installation and removal, anti-collision and non-deformation..
Fit For: It is universal for 1/10 scale drifting remote control car. After this rear wing being installed, your remote control car will become more beautiful and authentic..
Guarantee: Our product have 180 days warranty, if you have any question about this product, please feel free to contact us, we will try our best to help you solve your problem..

Check Stock

FR4 Epoxy-Sheet Resin Glass-Fiber Insulation-Plate - 335X300X1MM Green

1. FR-4 epoxy board has the characteristics of insulation, flame retardant, high temperature resistance, and strong physical properties.
2. It is an indispensable main material or auxiliary material for high -end motor electrical appliances, wind power, hydropower, rail transit, aviation navigation, mold molds, electronics, intelligent physiotherapy and other industries..
3. You can injection mold molding machine, motor, PCB, ICT treatment table grinding pad, high -performance electronic insulation, FPC reinforcement board, carbon film, insulation pad ..
5.Size: 1/25 "Thick x 11.8" Wide x 13.2 "Long.

Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
They have the characteristics of small size and high precision.
【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.

Check Stock

Yinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs

【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
They have the characteristics of small size and high precision.
【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.

Check Stock

Yinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs

【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
They have the characteristics of small size and high precision.
【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.

Check Stock

Plastic Bodywork White Blue Fairing Fit for Suzuki 2006 2007 GSXR 600 750 Injection Mold ABS New Bodyframe 06 07 GSXR-600 750

1.[Fit for] SUZUKI 2006 2007 GSXR 600 750.
2.[Complete Pieces Included] Front nose+ both sides fairings+ front fender+tail fairing+ unpainted black inner pieces+ rear seat cover + half tank cover.
3.[Complete Pieces Included]Fairing Pieces + Windscreen + Heat-shielding.
Holes and tabs are built into the mold and align to Factory Settings.
Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
5.[Attention]Instructions are Not Included.Highly Suggest Fairing be Installed by Professionals..

Check Stock

Samuelworld Ice Cube Trays - 2 inches Jumble Big Cubes & 2.5 inches Sphere Ice Mold Combo - Large Ice Tray for Whiskey and Cocktails - Craft Ice Maker to Keep Drinks Chilled - Gray

Large Ice Balls & Cubes Tray Combo: Keep your party cool and your drinks cooler with the large ice balls and cubes from Samuelworld ice freezing trays. The combo includes two trays that make four 2.5 inches ice balls and six 2 inches square ice cubes respectively.
4 Easy-to-make Giant Ice Balls: The ice ball mold comes with a funnel-shaped water-injection design that allows you to fill it easily without spillage. The hassle-free ice ball maker features flexible silicone that makes 4 perfectly round ice balls and also has a plastic base for fast portability.
6 Large Square Cubes in One Tray: Create 6 perfect giant ice cubes of water, soda, herbs, juice, and more by simply filling the cavities of the jumbo square ice cube tray and keeping it in the freezer.
Long-lasting Ice Cubes: The slow-melting round and square ice maker molds keep your drinks cool for an extended period of time. They are perfect for cocktails, bourbon whiskey, punch, fruit juice, and more. Use them for your house parties, home bars, restaurants, and events.
Safe & Easy to Clean: Both the silicone ice mold makers are made of high-quality food-grade material and are 100% safe to use in a freezer, microwave, and dishwasher.

Check Stock

Smedioks Premium Soft Plastiс Mold Lure Making Injection Molds Fishing Lures 3 Cavity Yama Senko 5''

MATERIAL: Enginered stone. Stone powded mixed with polymers to create a low-porous and durable material, which is a perfect fit for soft plastic lure molds..
INJECTION: Standart 5/8". This size unsures compatibility with most injectors..
LUBRICATION: Recommended. For best results use silicone grease..
DETAILED BAIT DESIGN . Fine level of detail comparable with aluminium molds and far better than sikicone molds..
SMART AIR VENTS design to release air and make sure that soft plastic fills all details of the mold..
Using only one lure mold and different additives you can make a soft plastic lure kit such as ice fishing lures, saltwater lures, freshwater lures, bass lures, etc..

Check Stock

Fairing Purple Fit for Suzuki 2006 2007 GSXR 600/750 Injection Mold ABS Bodywork New Aftermarket Bodyframe Kit Plastic 06 07 GSX-R 600 750 Y111

1.[Fit for] SUZUKI 2006 2007 GSXR 600/750.
2.[Complete Pieces Included] Front nose+ both sides fairings+ front fender+ half tank cover+ tail fairing+ rear seat cowl+ unpainted black inner pieces.
Holes and tabs are built into the mold and align to Factory Settings.
Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
5.[Attention]Instructions are Not Included.Highly Suggest Fairing be Installed by Professionals..

Check Stock

SRAM Road Computer Mount

Injection mold nylon/glass fill with stainless T25 bolt.

Check Stock