ReviewsTwo Patch

Broken Wings Patch Small - 5x1.75 inch

  • Broken Wings Patch Small measures 5x1.75 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your l....
Check Stock

Oakland Patch - 4x1 inch. Embroidered Iron on Patch

  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to....
Check Stock

1789 2nd Second Amendment Homeland Security Womens Pink Embroidered Patch

  • 2nd Amendment Rocker Patch measures 4x1.5 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your ....
Check Stock

Sour Patch Kids Easter Favorites and Specialty Candy Bundle for Easter Baskets. Bundle of 4 Items

  • SOUR PATCH KIDS BUNDLE: You'll get 4 Sour Patch Kids Easter candy. All of your favorites for Easter fun..
  • BUNDLE INCLUDES: Sour Patch Kids Bunnies 10 ounce stand up bag, Sour Patch Kids Jelly Beans 13 ounce bag, Two theater size boxes of Sour Patch Kids Bunnies 3.1 ounces each..
  • GREAT GIFT FOR EASTER: These are a great candy to give as a gift for Easter and for Easter baskets. Limited Edition candies that won't last forever, stock up while you can..
  • GREAT FOR EASTER EGG HUNTS and EASTER PARTY FAVORS: Just pop a few of these into an Easter egg, and you got the perfect Easter egg for your Easter egg hunt..
Check Stock

Chicago City Flag Patch - 3x2 inch. Embroidered Iron on Patch

  • Chicago City Flag Patch measures 3x2 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leath....
Check Stock

Patch Panel 24 Port Cat6 10G Support, Rapink Network Patch Panel UTP 19-Inch, Wallmount or Rackmount 1U Ethernet Patch Panel Punch Down Block for Cat6, Cat5e, Cat5 Cabling

  • 【10G Speed Support】This home networking panel support outstanding network connection up to 10G speed Ethernet network..
  • 【Widely Compatiable】Cat6 patch panel 24 port punch down type is compatiable for Cat6, Cat5e, Cat5 cabling. Therefore, this ideal punchdown panel punch can be use as punch panel cat5. This Cat6 patch panel has more expansion and upgrade capabilities than 12 port patch panel and 16 port patch panel, and also can use two of 24 port patch panel cat6 instead of 48 port patch panel..
  • 【1u & 19 inch】24 port patch panel cat6 is 1u height and 19 inch width. Easy to Install this network patch panel wall mount into 19 inch standard wallmount and rackmount or cabinet..
  • 【Gold plated pins】 All 8P8C of network punch panel are golden plated to support better network connection up to 10G speed Ethernet network. 568B labling on 24 port cat6 patch panel offer quick reference for punching down patch panel cat6..
  • 【Cable tie】Ethernet patch panel come with screws and zip tie wraps. With zip ties, it can effectively reduce the deformation of the ethernet cable, improve the working stability of the network connection port, and avoid the occurrence of network failures caused by the loosening and deformation of the cable..
Check Stock

Game Over Marriage Patch Medium - 3x3.75 inch. Embroidered Iron on Patch

  • Game Over Marriage Patch Medium measures 3x3.75 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch....
Check Stock

Machine Gun Bunny Rabbit Patch - 3.1x3.75 inch. Embroidered Iron on Patch

  • Machine Gun Bunny Rabbit Patch measures 3.1x3.75 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorc....
Check Stock

Calvin Klein Girls' Ultimate Skinny Fit Stretch Denim Jeans, Whiteout Knee Rip, 10

  • She's ready for fashion in white stretch denim by Calvin Klein Jeans, featuring a skinny fit with vintage accents and lurex-stitched back pockets..
  • Two front pockets, two back patch pockets.
Check Stock

Respect is Earned Loyalty is Returned Patch - 4x1.5 inch - Embroidered Iron on Patch

  • Respect is Earned Loyalty is Returned Patch measures 4x1.5 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this ....
Check Stock

I'm Your Huckleberry Black White Patch - 3x3 inch - Embroidered Iron on Patch

  • I'm Your Huckleberry Black White Patch measures 3x3 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will sc....
Check Stock