ReviewsTwo bolt Flange Units

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

76pc SPECBOLT Body Bolt KIT for Plastics seat fenders Fork Guards shrouds & subframe. Fits KTM & Husqvarna 65 80 85 125 150 200 250 350 400 450 500 520 525 SX SX-F XC XC-F XC-W XCF-W EX EXC EXC-F

  • 76 matching factory fit flange bolts that fit: KTM Husqvarna.
  • OE type torx head flange bolts with factory matching Dacromet plating.
  • Generous selection of Original Factory Matching fasteners.
  • Used for body work, plastics, seat, fork guards, and subframe on 2 and 4 stroke bikes.
  • Complete with 2 styles Factory Match radiator shroud bolts gold screws and M5 flange bolt type.
Check Stock

maXpeedingrods New GT25 GT28 GT2871 Turbo Charger 350BHP+ 0.64 A/R, GT2860 SR20 CA18DET 5-Bolt Flange Universal Turbocharger for 1.5L-2.0L Engine Water + Oil Cooled Turbo W/Gaskets

  • 【Application】：Universal for Turbo Manifold with T25 Flange(T28 Flange can be converted to T25 Flange, Adrapter is needed). Perfect for all 1.5L-2.0L engine.
  • 【Specification Size】Exhaust (Turbo Manifold) Flange: T25 4-Bolt Flange / Exhaust (Downpipe) Flange: 5-Bolt Flange.
  • 【Horse Power】: Boost Horse Power up to 350BHP.
  • 【Cooling Type】: Water and Oil Cooled. Oil Restrictor: Yes . [Oil Thread Size: M12*1.25 & Water Thread Size: M8*1.25].
  • 【Important Notice】:1. This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore please check the specifications and verify compatibility prior to placing your order. 2. Some modification may be required, professional installation is highly recommended (No Instruction Included).
Check Stock

Complete Rear-End Bolt-On Rear Disc Brake Kit Conversion, Universal, Fits Ford 9-Inch

  • Disc brake stopping power for your Ford 9 inch or 8 inch rearend at nearly the same cost as rebuilding/replacing drum brakes.
  • Kits includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM metric style calipers (non-emergency brake), brake pads and hardware for increased stopping power.
  • Fits over an axle with maximum flange diameter of 6-1/4" O.D..
  • Rotors have a 2.780" center hole with both 5 on 4-1/2" and 5 on 4-3/4" bolt circles.
  • Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".
Check Stock

Deer Fence Posts – Angle Steel Black Garden Fence Poles (8 feet (10 Poles))

  • HEAVY DUTY Long lasting premium quality high-carbon rail steel posts with tensile strength of at least 80,000 lbs. per square inch. This higher quality steel gives more strength per weight than average fence posts..
  • WEATHER RESISTANT black powder coated, will not rust, corrode, or fade.
  • FUNCTIONAL two 11 GA flanges at 90 degree angles, Flange width: 1-1/4”, with 5/16” holes punched out 2” apart on one flange for easy connection of fencing with zip ties or connecting two poles together(bolts, nuts, washers not included).
  • GREAT FOR DEER OR GARDEN FENCES protect your property or garden with these durable posts. Recommended spacing of poles would be a maximum of every 15 feet..
  • MULTIPLE SIZES AVAILABLE either 8 ft or 4 ft tall. Sold in sets of 10 posts per bundle. Or get our combo set with both 8ft and 4ft posts.
Check Stock

SUNMAK Solar Panel Mounting Z Bracket Installation for Solar Panels Supporting on RV Roofs,Caravans,Cabins, Sheds, Garages or Any Other Flat Stands, 16 Units per Set

  • 【SUPERIOR QUALITY】 Anodized Aluminum Z bracket, Stainless Steel Hex Bolts and screws, service life up to 20 years, perfectly supporting solar panels in off-grid installation.
  • 【MULTIPLE APPLICABILITY】Z Bracket is ideally designed to install single solar panels from 50w~150w on RV roofs,Caravans,Cabins, Sheds, Garages or any other flat stands.
  • 【EACH SET CONTAINS】16 units per set, each set includes 16pcs Z brackets, 16pcs bolts ,16pcs Flange Nuts, 32pcs Self-Tapping screws.
  • 【HIGH PERFORMANCE】Light weight in quality construction,rust free and excellent corrosion resistance performance. We ensure our Z brackets performs well in all weather conditions.
  • 【CONSIDERATE AFTER-SALES SERVICE】If you have any questions about product itself or about installation, please feel free to contact with us, we will have our professional technical team to help.
Check Stock

70pc Specbolt fits CR CRF Body Bolt KIT for Plastics SEAT FENDERS SHROUDS. FITS CR85 CR125 CR250 CR500 & CRF150 CRF250 CRF450 R Models CRF150R CRF250R CRF450R

  • 70 flange bolts including hard to find M5 shroud bolts and fork guard bolts.
  • 24-M6 10.9 grade reduced head flange bolts with factory matching zinc plating.
  • Seat bolts (3 sets), fork guard, shroud, and fender bolts.
  • Professional grade heat treated fasteners.
Check Stock

RDP Bellowed Up Pipe Kit with Hardware Compatible with 1999.5-2003 Ford 7.3L Powerstroke Diesel

  • Comes with two flange bolts and one flange gasket per side for ease of installation.
  • Rust-resistant for long-lasting performance.
  • Corrosion-resistant for extended durability.
  • A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards.
  • OE#: F4TZ6K854C, F4TZ6K854F, F81Z6K854EA, F81Z6K854FA, F81Z6N632AA, F8TZ6K854AA.
Check Stock

ForeverPRO WRFT02 Universal Extra Thick Toilet Wax Ring Replacement Kit for Floor Outlet Toilet Bowl with Black Rubber Flange Funnel Water Tight Seal Gasket Accommodates 3 Inch and 4 Inch Waste Lines

  • ✅ Compatible with most floor outlet toilets. This toilet seal ring is ready to use. Will not harden or deteriorate. Forms a water-tight seal. Toilet wax seal used with almost any toilet bowls.
  • ✅ ForeverPRO soft and flexible high-grade wax toilet ring seal. Extra thick double wax toilet ring. Comes with One Year Warranty Guarantee or no questions asked 90 day return.
  • ✅ Durable Premium Universal wax ring for toilet seal bowl with black rubber flange funnel water tight seal. Comes brand new in original retail packaging.
  • ✅ Toilet wax seal ring kit has all necessary accessories including toilet wax ring, 2 brass bolts, 2 retainer washers, 2 metal washers, 2 locking nuts and 2 caps for easy DIY Installation.
  • ✅ Directions: 1. Set the toilet bowl upside down on a soft non-abrasive surface. Place the ForeverPRO toilet gasket ring firmly in place around the discharge opening (with the polypropylene flange pointing away from the bowl). 2. Carefully lift the bowl over the toilet flange, line it up with the flange bolts and set it in place. Twist the bowl slightly to spread the wax gasket and use your body weight to seat the bowl on the floor. 3. Tighten the flange bolts, but do not over tighten.
Check Stock