ReviewsTyre Cutting Blade

EZARC 5 inch Diamond Blade, Segmented Stone Expert Diamond Saw Blades for Angle Grinder, 5\ Stone Blade for Cutting Concrete Granite Masonry Brick (2-Pack)

  • ★【Stone Master】EZARC diamond blade is designed for aggressive cutting on masonry materials such as granite, concrete, nature stone and brick. Whether you are a construction worker, plumber, tile installer, roof worker, paver, DIY enthusiast or work at your home studio, this cutting blade is the perfect for you..
  • ★【Speed-optimized cutting】EZARC has increased the cutting speed of its new Stone-Master Segmented rim diamond saw blade by 30% to meet the current market requirement for speed..
  • ★【Long Service Life】Thanks to premium diamond grit with hardness HRC90+ and special dimensional arrangement, our grinder masonry blade has maximum cutting life. This angle grinder concrete blade guarantees a much longer lifetime for heavy duty cutting demands..
  • ★【Fit Tools】 EZARC 5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor. Disc Size:5 Inch.
  • ★【Reliable Safety】This 5 Inch diamond blade for angle grinder is manufactured with high strength alloy steel and prime diamond matrix, which ensure spark-free cutting without burning marks on hard materials. Universal for dry or wet cutting..
Check Stock

Andis – 64071 Ultra Edge Dog Clipper Blade – Constructed of Carbonized Steel Resists Heat & Rust with Long-Lasting Sharp Edges

  • CONSTRUCTION: High-quality carbonized steel is used in the construction of the Ultra-Edges blade, extending the blade's edge life.
  • The blades are extremely heat and rust-resistant..
  • HIGH RESISTANCE: The chrome-finished, heat- and rust-resistant close-cutting blade offer animals a cooler, more comfortable cutting experience.
  • They won't experience any pain or harm when getting their hair cut..
  • ULTRA EDGE: The UltraEdge blades undergo a special hardening process for a longer blade life, extending the period they can be used.
  • CUTTING LENGTH: The clipper blade is extremely cutting.
  • The thick and lengthy hairs on the pet's feet, pads, face, ears, and tail can be easily removed by using this size-10 blade and a 1/16-inch cutting length..
  • COMPATIBLE: The dog clipper blade is compatible with the Andis AG, AGC, AGP, AGRC, AGCL, AGR Plus, AGRV, DBLC, MBG, and SMC detachable blade clippers.
  • It also works with the Oster A5 and Wahl KM series..
Check Stock

MantisTol LVP-231 8.9' Vinyl Plank Cutter ,for LVT/VCT/LVP/PVC/WPC/Rigid Core.

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor. The blade of our LVP-230 cutters can be moved. There are many complex scenes on the construction site that need special cutting (irregular corners,most of which are columns, door edges and wall corners). It can help you finish your work smoothly. Be sure to buy one of the good things and try it, not to mention the beautiful price, which will save you a lot of time to accompany your family!.
  • Straight cut, Angle cut, Notch cut, Rip cut and more . Clearly marked measuring guide. 0-45° Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it!.
  • 2.2mm thick 9” length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service life,this is a man-made damage and is not covered by the warranty! Or replace blade..
  • If you received the cutter that cuts less than 8mm thick, please remove the blade, clean....
Check Stock

EZARC 4-1/2 inch Diamond Blade, Segmented Stone Expert Diamond Saw Blades for Angle Grinder, 4.5\ Stone Blade for Cutting Concrete Granite Masonry Brick (2-Pack)

  • ★【Stone Master】EZARC diamond blade is designed for aggressive cutting on masonry materials such as granite, concrete, nature stone and brick. Whether you are a construction worker, plumber, tile installer, roof worker, paver, DIY enthusiast or work at your home studio, this cutting blade is the perfect for you..
  • ★【Speed-optimized cutting】EZARC has increased the cutting speed of its new Stone-Master Segmented rim diamond saw blade by 30% to meet the current market requirement for speed..
  • ★【Long Service Life】Thanks to premium diamond grit with hardness HRC90+ and special dimensional arrangement, our grinder masonry blade has maximum cutting life. This angle grinder concrete blade guarantees a much longer lifetime for heavy duty cutting demands..
  • ★【Fit Tools】EZARC 4.5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor. Disc Size:4-1/2 Inch.
  • ★【Reliable Safety】This 4 1/2 diamond blade for angle grinder is manufactured with high strength alloy steel and prime diamond matrix, which ensure spark-free cutting without burning marks on hard materials. Universal for dry or wet cutting..
Check Stock

Diapro 4.5\ Tile Saw Blade Diamond Blade for Cutting and Grinding Porcelain Tile Granite Marble (4.5\

  • Wet or dry cutting with Arbor size:7/8"-5/8".
  • Dry cutting & grinding applications on one blade.
  • 4.5" Tile saw blade can make straight cuts and grind bullnose edges.
  • This diamond blade provides a faster & smoother chip free cut.
  • 4.5" Tile blade available for cutting porcelain,ceramic tile,granite,marble.
  • Grinding height:20mm,Cutting height:10mm,Segment thickness:1.7mm.
Check Stock

MantisTol 8.9

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. You need to know that this can only cut vinyl plank, not laminate floor or wood floor!!!No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • " L & " cut and Lengthwise cut (Solve the installation of wall and corner). Clearly marked measuide. 0-45 Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it.
  • 2.2mm thick 9 length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service lifethis is a man-made damage and is not covered by the warranty! Or replace blade..
  • Angle Cutting: 0 - 45 inch 160mm wide plank.
Check Stock

Freud LU77M010 10-Inch 80 Tooth TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor

  • TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade.
Check Stock

Freud 10 In. 80 Tooth Ultimate Plywood and Melamine Cutting Saw Blade with 5/8 In. Arbor (LU80R010), Multi, One Size

  • Hi-ATB Ultimate Plywood and Melamine Cutting Saw Blade.
Check Stock

TECCPO Cordless Circular Saw, 4.0Ah 20V 4,500RPM Saw with Laser, 3 Blades(4-1/2'), Fast Charger, Max Cutting Depth 1-11/16''(90°), 1-1/8''(45°), for Wood, Plastic, Soft Metal and Tile Cuts - MTW510B

  • [ 4.0 Ah Battery & High-Efficiency Motor ] 20V 4,000mAh large capacity battery allows for a long working time every charge. 2.0A charger is equipped for fast charging. The pure copper motor delivers 4,500 RPM no-load speed for high-efficiency cutting..
  • [ 0-45° Bevel Cutting & Multipurpose Cutting ] 0-45° adjustable bevel cutting enables various angle cutting. Max cutting depth: 1-11/16" at 90° and 1-1/8" at 45°. 3 blades of different materials meet your different cutting needs: 24T TCT blade for wood, HSS blade for plastic & soft metal, and grit diamond blade for tile..
  • [ Precise & Straight Cutting ] Integrated laser together with scale ruler ensures precise and straight cutting. The ergonomically designed rubber-covered handle and 9.5” long metal blade plate largely reduces vibration and make cutting more stable and precise. The dust removal tube can be connected to vacuum cleaner to ensure a clean and clear working environment..
  • [ Safety & Ergonomic Design ] The double protection switch avoids accidental start of the machine and ensures safer cutting operations. Metal blade guard prevents children from touching the blade. Ergonomic design with slim rubber handle makes it possible to grip and handle with one hand..
Check Stock

DODAER Size 7F/5F/4F/3F Detachable Pet Dog Grooming Blades of Stainless Steel,Compatible with Andis,Oster A5,Wahl KM10 Series,4 Count

  • SIZE:7F Blade Cutting length 1/8 In(3.2mm),5F Blade Cutting length 1/4 In(6.3mm),4F Blade Cutting length 3/8 In(9.5mm),3F Blade Cutting length 1/2 In(13mm).
  • Materials:blade 440C Stainless-steel,Blade sharp and strong hardness, water will not rust..
  • Model:Compatible with Andi-s UltraEdge/CeramicEdge series,for Andi-s model detachable blade clippers:Compatible with A-G, A-GC, A-GP, A-GRC, A-GCL, A-GR Plus, A-GRV, DBLC, M-BG, SMC,V-ersa and Most Oster-A5 and most detachable-type clippers and Wahl-KM-10 Series.
  • Product list:7F blade*1,5F blade*1,4F blade*1,3F blade*1,4 size blade to meet your cut needs.
  • After-sales service:If blade set that you purchase fails to fit your machine, please contact customer service and we will reply within 24 hours, we will arrange free of charge or refund.
Check Stock

DEWALT Jig Saw, Top Handle, 6.5-Amp, Corded (DW331K)

  • Powerful 6.5 amp motor of the jigsaw tool delivers the cutting power needed for the most demanding materials.
  • Variable speed of the jig saw delivers 500 - 3,100 strokes per minute for optimal cutting speed for a variety of applications.
  • Keyless, lever-action blade clamp for quick and easy blade changes.
  • All-metal gear case and keyless blade lever enhance tool durability in a professional shop environment.
  • 4-position orbital action provides control of cut quality and speed.
  • Positive bevel detents ensure accuracy at the most common angles 0 degree, 15 degree, 30 degree, and 45 degree.
  • Extra-large rubber grip dampens vibration and provides comfort during prolonged use.
  • Integrated dust blower maintains visibility of cut line.
  • Non-marring plastic shoe cover protects soft or glossy materials from scratches from the shoe.
  • Accepts T-shank blades for optimal holding power and professional results.
  • Powerful 6.5 Amp motor delivers the cutting power for the most demanding materials.
  • variable speed delivers 500 - 3,100 strokes per minute for optimal cutting speed for all applications.
  • Keyless lever-action blade clamp for quick and easy blade changes.
Check Stock