ReviewsU Bearings

Traxxas Stampede 2wd XL-5 VXL MAGNUM 272 GRAY CASE TRANSMISSION w/ STEEL GEARS

Make sure this fits. by entering your model number..
Magnum 272 Transmission - Gray The Magnum 272 Transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears (not included), power is delivered quietly to the telescoping U-joint driveshafts (not included). The sealed gearbox protects the transmission components from dirt and rocks. Includes Gray Transmission Gearbox Halves (Part # 3691A) Input Slipper Shaft (Part # 3793) Six (6) 5x11x4 Ball Bearings.
Includes: Gearbox Halves w/Idler Gear Shaft - Gray (Part # 3691A) Input/Slipper Shaft w/ Spring Pin (Part # 3793) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 3) 20 Fiber Washers - 5x8mm (Part # 1985) Planetary Gear Differential & Steel Ring Gear (Part # 2388X) 22T Top Steel Drive Gear (Part # 3195) Steel Idler Gear - 30T (Part # 3696) 6 Button Head Machine Screws - 3x23mm Hex Drive (Part # 2591) 6 Button Head Machine Screws - 3x20mm Hex Drive (Part # 2580) 6 Flat Head Hex Dri.
Part number(s) included (in factory packaging): 3691A 3793 5116 1985 2388X 3195 3696 2591 2580 3931.

SOLE DESIGN: U-BUY has designed a range of brake and clutch different from other levers, it used modern CNC and laser techniques which can guarantee a long life of the product and an excellent visibility of the laser graved logo..
HIGH QUALITY PARTS: By simply adjusting a setscrew on the U-BUY lever, the reach can be adjusted to accommodate the smallest to the largest hands and gives the best clutch or brake response.U-BUY levers use chrome steel precision sealed bearings, stainless steel pivot and bushing parts, Chrome Silicon cantilever springs, aerospace grade stainless steel and chromoly fasteners..
U-BAY ADVANCEMENT: This levers has high quality CNC levers handle which can ensure superior durability and performance,prevent from bending or breaking in the accident.Anti-slip rough surface lever can make your fingers feel perfectly on the levers..
QUALITY ASSURANCE: 12-Month Warranty. If you have any questions,please feel free to contact us,we will give you a response as soon as possible..
Package Includes： ① Lever X 2 (Brake & Clutch) ② a tool for length adjustment ③ free gift (Other sellers are unable to provide).

The 27 Pieces of Press and Pull Sleeve Kit is designed for removal and installation of all types of bearings, bushes and seals. It is designed to....
Tool Press and Pull Sleeve Kit can also be used with a workshop press if required. It kit contains a unique design with U-Plot on each sleeve for....
This professional pull and press sleeve kit set with 5 pulling spindles and nuts is designed for the removal and installation of bushes, bearings and....
5*pulling spindle 45# Carton steel + nuts sizes: M10, M12, M14, M16, M18..
Specifications: 1. Press Sleeves Side Diameter: 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 75, 80mm Outside....

Forged high quality alloy steel cross is case hardened to provide good wear resistance and maximum service life. Pre-installed grease fitting in the cross saves time, prevents installation damage and allows for easy U-Joint maintenance..
Forged high strength steel cups are case hardened for strength and durability. Cup face and outer diameter are precision ground to provide precise fit, lock up and balance ability..
High carbon steel needle bearings are through hardened and precision ground using a optimized crowning profile for maximum life and load carrying capacity..
Seals are made out of high quality nitrile rubber for optimal grease retention and contaminant exclusion. Multi-lip seal is pliable, yet tough and tear resistant..
All U-Joints are pre-lubricated with a premium, high temperature grease that performs well in a wide temperature range and provides a long service life..

Forged high quality alloy steel cross is case hardened to provide good wear resistance and maximum service life. Pre-installed grease fitting in the cross saves time, prevents installation damage and allows for easy U-Joint maintenance..
Forged high strength steel cups are case hardened for strength and durability. Cup face and outer diameter are precision ground to provide precise fit, lock up and balance ability..
High carbon steel needle bearings are through hardened and precision ground using a optimized crowning profile for maximum life and load carrying capacity..
Seals are made out of high quality nitrile rubber for optimal grease retention and contaminant exclusion. Multi-lip seal is pliable, yet tough and tear resistant..
All U-Joints are pre-lubricated with a premium, high temperature grease that performs well in a wide temperature range and provides a long service life..

Lithium Thickened Amber Grease for General All Purpose Grease Applications from Vehicle to Household Items.
Applications: Ball Joints, Tie Rod Ends, Sway Bars, Bearings, Bushings, Cables, Gears, RV Slide Out, ATV Spreader, Guide Rails, Hinges, Industrial Chains, Latches, Lawn Mowers, Locks, Nuts/bolts, Overhead Door Tracks, Pivot Points, Slides, Springs, Winches, Drive Shafts, U-joints, And External Moving Parts.
Suitable For Light Duty Greasing of Journal And Anti-friction Bearings, Non-disc Brake Wheel Bearings, Chassis Fittings, Springs, Water Pumps, Universal Joints, Lawn Mower Equipment, Power Tools And More!.
Universal Fit: Works with Lock N' Lube, DEWALT, MILWAUKEE, Lincoln, Lucas, Ryobi, Bravex, GreaseTek, STEINBRÜCKE and Many More Manual and Automatic Grease Gun Brands!.
Reduced Risk of Tube Arriving Damaged Due to Carrier Mishandling - A Very Common Customer Complaint Our Competitors Have Yet To Address! GreaseCo Tube Labels are FULLY SHRINK WRAPPED - Sealing and Securing Both Ends Reducing Loose/Broken Caps in Transit Handling. SEAL AND PEEL TUBE LABELS.

3D Printer filament holder: the width can be adjusted (about 33mm-77mm/1.30inch-3.03inch) to adapt to different wire reels.
4pcs green U-shaped wheels with bearings inside, which rotate smoothly and feed printing flexible filament more smoothly, Stable and durable foot pads....
The Filament tray fits closely to the U-shaped wheel so that the filament will not fall out of the U-shaped wheel during work, the material draws and....
The range of the material spool holder can be adjusted according to the size of its filament, which is more flexible.
There is a fixed hole in the middle of the filament spool holder, which can be placed on a desktop, and can also be fixed on the top of the 2020....

Reference 7184-0156, 7184-0432, Coleman Part # 1468-306, 1468-3069, 7855MVA-A11U (8333 series).