ReviewsU Bolts Inch Wide X 8

Upper Bounce Trampoline Safety Enclosure Set including Trampoline Net, 8 Trampoline Poles (with 8 pole caps) Trampoline Pole Foam Sleeves - Fits 15ft Round Trampoline Frame - Installs Inside the Frame

  • Included in the Set: This Upper Bounce trampoline safety enclosure set includes safety enclosure net, 8 heavy duty upper and lower trampoline poles, trampoline pole foam sleeves for poles, 8 trampoline pole caps and 16 u-bolts (2 U-bolts for each pole)..
  • Pole Foam Sleeves and Pole Caps: The pole foam sleeves included in this set will protect your kids from getting hurt in case they bump into trampoline poles while jumping. This set also includes trampoline pole caps to cover the top edges of the poles..
  • U-Bolts: A set of 16 U-bolts is provided with this trampoline safety enclosure set. these bolts are used to attach the trampoline poles with the trampoline frame. Each of the trampoline poles uses 2 U-bolts to hold the trampoline poles firmly in place..
  • Trampoline Net Poles: This trampoline safety enclosure set comes with 8 heavy duty tarmpoline poles. the trampoline net poles are made from high quality stainless steel which protects the trampoline poles from all types of outdoor weather conditions..
  • Net for Trampoline: The trampoline net included in this set installs inside the frame. It is compatible with 15ft round trampolines from any brand out there. This trampoline net is tested for its safety and durability to ensure maximum protection..
Check Stock

Kolpin Stronghold Autolatch

  • Auto-latching design provides quick secure attachment of any Kolpin Stronghold products.
  • Engineered steel bracket for precision angling and attachment to vehicles.
  • Spring loaded latch with stainless steel spring.
  • Durable glass-reinforced nylon auto-latch construction.
  • Includes u-bolts and universal mounting hardware. Included Mounting Hardware: (8) Nylon Lock Nuts, M6-1.0, (8) Flat Washer, M6, (4) U-Bolt, M6-1.0 x 25mm ID x 45mm, (4) Flange Hex Bolt, M6-1.0 x 35mm LG, (1) Mounting Bracket.
Check Stock

DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
  • Bolts and washers are 5/16”-18 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includes ....
Check Stock

DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
  • Bolts and washers are 1/4”-20 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includ....
Check Stock

VEVOR Roof Rack Cargo Basket 46 x 36 x 4.5 Rooftop Cargo Carrier Heavy-Duty 200 LBS Capacity Universal Roof Rack Basket Luggage Holder for SUV Truck Vehicle

  • ...ll steel basket fence prevents your items from falling..
  • Aerodynamic Design: The front of the roof cargo rack is equipped with a wind fairing to reduce resistance and wind noise. The cargo basket is designed with a curved corner to avoid scratches and accidental injuries when loading and unloading cargo..
  • Universal U-Bolts: Thanks to the easy to install 4 universal U-bolts, the installation process has never been quicker. The u-bolts accommodate square crossbars up to 4.65" wide x 1.375" thick or round bars up to 1.375" in diameter. Please make sure your car has a crossbar..
  • Perfect for Travel: This rooftop cargo basket is ideal for loading irregularly shaped items such as camping equipment, luggage, cargo bags, bikes, kayaking gear, and other outdoor equipment. It is a simple yet effective solution for maximizing the storage area of your vehicle. Bring all your favorite camping gear with you, and enjoy your trip!.
Check Stock

VEITHI Boat Cleats 8 inch (4 Pack) - Hot Dipped Galvanized Boat Cleats, Rope Cleat, Anchor Line Cleat - Boat Dock Cleats Ideal for Boat Docks, Decks, Piers for Tying up Boats, Marine Decor

  • Rough Cast Hot Dipped Galvanized Iron -These are well durable galvanized cleats, 100% protected against rust. Include 4 boat cleats with 8 bolts and nuts ready to use indoor and outdoor.These can hold their own against the weather..
  • Hexagonal Hole for Easy Installation - Boat tie down cleats bolt will stay in place when securing the cleat. no more holding the bolt with one hand and tightening with the other..
  • Size&Hardware- These dock cleats 8 inch L x 1.9 inch H ,base measures 2.8 inch x 1.2 inch.
  • mounting holes 1.65 inch center to center,boat cleats with hardware - M8x 4.1 inch bolts and nuts included, perfect size to fit any use, bolts can be cut if needed..
  • Wide Footprint for Strength - Dock cleats 8 inch galvanized large bottom footprint for additional strength,Perfect as cleat hook for boat docks, decks, piers for tying up boats, kayaks and jet ski's..
  • Home Nautical Decor- Galvanized boat cleats make your home stand out.
  • perfect for maritime, beach, garden, pool, coastal decorations.
  • use them as cabinet pulls, boat cleat towel rack, rustic coat hanger, curtain tie-backs, nautical coat hooks..
Check Stock

Boat Cleats 8 inch (2 Pack) - Electrophoretic Coated Boat Dock Cleats Black, Rope Cleat, Anchor Line Cleat,Dock Cleats With Hardware Ideal for Boat Docks, Decks, Piers for Tying up Boats, Marine Decor

  • Dock Cleats 8 inch Black- These are well durable iron nautical cleats and corrosion resistant, Include 2 boat cleats with 4 bolts and nuts ready to use indoor and outdoor.These can hold their own against the weather..
  • Hexagonal Hole for Easy Installation - Boat tie down cleats bolt will stay in place when securing the cleat. no more holding the bolt with one hand and tightening with the other..
  • Wide Footprint for Strength- These black boat cleats for dock lines large bottom footprint for additional strength,Perfect as cleat hook for boat docks, decks, piers for tying up boats, kayaks and jet ski's..
  • Size&Hardware- These black dock cleats 8 inch L x 1.9 inch H ,base measures 2.8 inch x 1.2 inch.
  • mounting holes 1.65 inch center to center,boat cleats with hardware - M8x 4.1 inch bolts and nuts included, perfect size to fit any use, bolts can be cut if needed..
  • Home Nautical Decor- Boat dock cleats 8 inch make your home stand out.
  • perfect for maritime, beach, garden, pool, coastal decorations.
  • use them as cabinet pulls, boat cleat hooks for towels, rustic coat hanger, curtain tie-backs, nautical coat hooks.boat cleat wall hook,boat cleat hooks..
Check Stock

Orange Cycle Parts Crankcase Breather Kit for Harley 1999-2017 Big Twin (Except 2017 FXDLS, 2016-2017 Softails and 2008-2017 Dressers)

  • Orange Cycle Parts Crankcase Breather Kit.
  • Can be used with most aftermarket air cleaners.
  • Included: (1) U-shape metal tube, (2) 1/2in. x 1-1/2 in. chrome banjo bolts, (2) 3/8 in. x 1-1/2 in. drilled chrome bolts, (8) 1/2 in. plastic washers, (6) 1/2 in. flat washers, and (4) 3/8 in. flanged washers.
Check Stock

Prime-Line 9071931 U-Bolts, Round Bend, 1/4 inch-20 X 1-1/8 inch X 2-1/4 inch - (3/4 inch Pipe), Zinc Plated Steel, (10-pack)

  • STOP: ONLY USE a Hand Socket Ratchet or wrench to run the nuts up and tighten..
  • DO NOT USE an impact or powered socket driver. Ignoring this instruction will cause U-Bolt Galling / Seizing / Breaking / Failure / Expletives / Sawzall. Let's keep it Fun, and Successful..
  • U-Bolt Size: 1/2" Diam x 3- 1/16" Inside Width x 5- 5/16" Inside Height (Length).
  • Attention: When measuring for Your needed Height (Length), add 1" for the nut and washer..
  • Threading: 1/2"-13 with a thread length of 2- 1/2"..
  • U-Bolts and hardware are made out of 304 Stainless Steel..
  • These U-Bolts will fit on 3" x 3" cross members, such as 3" x 3" box steel..
Check Stock

CURT 25388 Channel-Mount Adjustable Trailer Coupler Hardware Kit

  • Includes bolts for attaching a CURT channel-mount coupler to a channel (sold separately).
  • Compatible with CURT channels #48610 or #48650, and any CURT channel coupler.
  • Features grade-8 bolts for a solid mount.
  • Includes two 5/8-inch x 4-3/4-inch hex bolts, two 5/8-inch nylock hex nuts and four 5/8-inch flat washers.
Check Stock

CURT 25389 Channel-Mount Adjustable Trailer Coupler Hardware Kit

  • Includes bolts for attaching a CURT channel-mount coupler to a channel.
  • Compatible with CURT channels #48610 or #48650, and any CURT channel coupler.
  • Features grade-8 bolts for a solid mount.
  • Includes two 5/8-inch x 4-3/4-inch hex bolts, two 5/8-inch nylock hex nuts and four 5/8-inch flat washers (coupler sold separately).
Check Stock