ReviewsU Power Exhaust Tips

AUTOSAVER88 1.75-2.25 Inch Adjustable Dual Exhaust Tip, 1.75'-2.25' Inlet 3' Outlet 8.66' Long Stainless Steel Double Layer Exhaust Tail Tip for 1.75'/2.0'/2.25' O.D. Tailpipe, Bolt On, Black Plating

  • Dimension: 1.75-2.25 inch adjustable inlet diameter.
  • universal fits 1.75″/2.0″/2.25″ outside diameter exhaust pipes whatever its Year/Make/Model is (Note: please measure dimension to make sure the outside diameter of your tailpipe is between 1.75-inch and 2.25-inch before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the light black plating finish gives your car a new & sporty appeal.
  • Easy installation: Bolt-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

IFOKA 2.5 Inch Inlet Exhaust Tip , 2.5' Inlet x 3' Outlet 6 Inch Long Diesel Exhaust Tips, Stainless Steel Polished Finish Exhaust Tailpipe Extension, Clamp-on Design

  • Dimension: Exhaust tips 2.5 inch inlet, 3 inch outlet, 6 inches overall length. Note: Fits tailpipe with 2.5 inches outlet diameter only, please measure the outlet diameter of your pipe before purchase.
  • Material: Stainless steel with mirror polished surface treatment, anti-corrosive, high temperature resistance, and not easy to scratch & fall off. Prevent the original exhaust tailpipe from sun and rain..
  • Easy to install: Cleaning tailpipe and exhaust tips, unscrew the bolt but not remove it, slide the tip into place on the tailpipe, move the clamp to a place flush with the entry port, then tighten the screw and clamps..
  • Unique Driving Pleasure: Rolled edge and angled cut design, and elegant chrome can perfectly decorate your vehicle. Thicker inner waller design makes the vehicle sounds rumble and crackle, give you the unique driving pleasure..
  • Rustproof Design: There is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. In order to prolong the service life of the product, clean up once a month..
Check Stock

Floshine 8PCS DIY Stainless Steel 3 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe,Universal Fit 3.0 Inch Exhaust System…

  • DIY Exhaust System–Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality–Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit– 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes, 2 pcs 180° U-Bends.
  • Easy to installation–Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment–Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 3.0 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

Akrapovic Exhaust End Cap

  • Quiet Core and Quiet Tips inserts produce a more subdued exhaust note.
  • End caps offered in a variety of sizes to allow fine-tuning of power delivery for different types of riding and terrain.
Check Stock

Pro Circuit Exhaust Spark Arrestor Screen Replacement

  • Quiet Core and Quiet Tips inserts produce a more subdued exhaust note.
  • End caps offered in a variety of sizes to allow fine-tuning of power delivery for different types of riding and terrain.
Check Stock

Floshine 8PCS DIY Stainless Steel 2.25 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe,Universal Fit 2.25 Inch Exhaust System

  • DIY Exhaust System--Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality--Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit-- 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes, 2 pcs 180° U-Bends.
  • Easy to installation--Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment--Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 2.5 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

Cowin Solar Fan System - Solar Energy Fan (16’’ Blade), LED Light, 15W Solar Panel, USB Port, Comes with Outlet Converter

  • Solar Exhaust Fan --- 5V Solar panel, 8" mini fan and long 110 cm/43.3" USB line set. It can be used conveniently and quickly outdoors anytime, anywhere. Solar powered fan ventilator applicate for pet house, chicken house, tree house, dog house, greenhouse etc..
  • USB or Solar Powered --- This solar fan can be easily charged by USB devices such as power bank, computer and so on, or by solar panel, both for your indoor and outdoor use. There is no rechargeable battery in the fan. If you need the fan works at night, you can use a power bank..
  • ❗NOTE AND TIPS --- When connected to a waterproof solar panel, the way the solar greenhouse fan works depends on the sunlight. When the sunlight is strong, the fan works quickly. When the sunshine is not strong enough, the solar fan will working more slow or stops working when the sunshine is weak. O....
Check Stock

AUTOSAVER88 1.5-2.5 Inch Exhaust Tip, 1.5"-2.5" Inlet 4" Outlet 9" Long Blue Burnt Stainless Exhaust Tip with Clamps and Adapters Fit for 1.5"/1.75"/2.0"/2.25"/2.5" Outer Diameter Tailpipe, Bolt-On

  • Dimension: Standard 1.5"-2.5" x 4" x 9" (inlet, outlet, and overall length).
  • Fits for cars with 1.5"/1.75"/2.0"/2.25"/2.5" outside diameter exhaust pipes, no matter what its model is (Please make sure the outside diameter of your car tailpipe is between 1.5-inch and 2.5-inch before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel with blue burnt finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of ....
Check Stock

IFOKA Exhaust Tip 2.5 Inch Inlet 2.5 Inlet 2.5 Outlet 9 Long Black Exhaust Tips Turn Down Diesel Stainless Steel Powder Coated Finish Tailpipe Extension Bolt On Design Pipe Down

  • Dimension: Black exhaust tips 2.5" inlet, 2.5 inches outlet, 9 inches overall length. Universally compatible with vehicles which have exhaust pipes....
  • Material: Stainless steel with black powder-coated surface treatment, prevent corrosion, high-temperature resistance, and not easy to scratch & fall....
  • Easy to install: Before the installation, cleaning the tailpipe and exhaust tips are necessary. The bolt on design make it easy to install, and not....
  • Unique Driving Experience: Angle cut and turn down design, more thicker inner waller design makes the vehicle sounds rumble and crackle, give you the....
  • Rustproof Design: Angle cut on the bottom of the exhaust tip, not easy to accumulate water and avoid rust effectively. In order to prolong the service....
Check Stock

Exhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Check Stock

DUCKY PRODUCTS Original Water Spot Remover: Spray for Boat, Car, Motorcycle & RV Exterior Detailing, 32 oz

  • Spray-On, Wipe Off: Just spray on affected area and watch as hard water deposits are easily dissolved away, leaving a newly restored surface free of calcium and mineral deposits..
  • No Wax Formula: Free of wax and gloss enhancers and is recommended for use on matte, flat, denim or on surfaces where no wax or gloss enhancement is desired. (If wax coating is desired, try Ducky Water Spot Plus).
  • Cleaning Power: It doesn't stop at the water spot's edge. It's amazingly effective at removing exhaust deposits from the transom and chrome exhaust tips..
  • Non-Toxic: The non-toxic and biodegradable formula safely and effortlessly eliminates hard water spots.
  • The Original: Developed in 1989, The Original Ducky Water Spot Remover was developed in 1989 and remains the most popular and sought after product of its kind..
Check Stock