ReviewsU joints Coupling

OEMTOOLS 24538 Heavy Duty Automotive U Joint Puller U Joint Tool Works On Most Class 7 and Class 8 Trucks Easy-to-Use U Joint Puller Green

  • REMOVE ON VARIETY OF MODELS: Don’t rely on dangerous and damaging methods like hammers, sockets, and vises to remove U joints.
  • GENTLE ON VEHICLES: Prevent damage on the driveshaft, yokes, joints, and bearing cups by utilizing our U joint press.
  • EASY AND SAFE TO USE: No hassle and safe to use.
  • Our heavy duty universal joint puller can be used with a 1" drive impact wrench or smaller.
  • DURABLE BUILD QUALITY: Built to hold up against multiple heavy duty uses.
  • Easily torque the U joint removal tool kit by hand to remove a seized back....
  • A PROFESSIONAL’S U JOINT PULLER KIT: Working on a budget doesn’t mean you have to sacrifice quality.
  • Professional mechanics will find that our....
Check Stock

TEKTON 1/4, 3/8 Inch Drive Universal Joint Socket Set, 33-Piece (1/4-3/4 in, 6-19 mm) | SHD99301

  • Includes 7-pc. 1/4 in. drive 6-point inch u-joint sockets: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in..
  • 9-pc. 1/4 in. drive 6-point metric u-joint sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14 mm.
  • 7-pc. 3/8 in. drive 6-point inch u-joint sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in..
  • 10-pc. 3/8 in. drive 6-point metric u-joint sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm.
  • Combines a shallow 6-point socket and compact universal joint.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Sockets come organized in a sturdy case that features strong latches and clear, molded markings for each tool.
Check Stock

NEW SOUTHWEST SPEED STEEL DRIVESHAFT WITH SLIP SPLINE YOKE AND U-JOINTS FOR RACING, STREET RODS, HOT RODS, AVAILABLE FROM 27" TO 69"

  • Precision balanced, lightweight steel shafts are in stock & ready to ship.
  • Your choice of any length from 27" to 69" long, in 1/2" increments.
  • These lengths are measured center of u-joint cup to center of u-joint cup (2nd picture above), but we also have a way to measure them without having a current shaft..
  • Includes new 27 spline yoke and 1310 series u-joints. Other yokes & conversion u-joints are available. Just ask before ordering for the price difference..
  • These driveshafts have been used for years by some of the best race car & street rod builders in the country.
Check Stock

Bailey Universal Joint Assemblies (Standard Series), Standard U Joint with 1 inch x 1 inch Inner Diameter - Universal Joint with Relubricable Bearings - Standard Rod Ends Ball Joint, 1000 RPM, 2.52 lb

  • SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 1-inch x 1-inch inner diameter, ¼” keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.52 lb (1.14 kg)..
  • PRECISE CONTROL: This driveline u joint is ideal for connecting control rods, steering links, etc. It maintains a fixed point of contact between two shafts and can control the movement of the shafts with high precision..
  • HIGH SPEED OPERATION: This 1000 RPM u joint offers 90 degree deflection and is capable of carrying up to 1000 RPM torque. Thanks to its needle roller bearings, this universal standard joint can tackle big and rigid shafts with ease..
  • MADE TO LAST: This universal joint is made with durability in mind. Its forged yoke is sturdy, flexible, reliable, and holds up well against high heat. Our universal joint is long-lasting and low maintenance..
  • MULTIPURPOSE USES: Our steering shaft u joint has a wide variety of applications in automobiles including lightweight, commercial and off-highway vehicles. It offers hassle-free interchange with the Spicer 1000 series..
Check Stock

OEMTOOLS 37089 Ball Joint and U Joint Press Set Forged Steel U Joint Removal Tool Ball Joint Separator Rust-Resistant Coated Ball Joint Removal Tool

  • RELIABLE BALL JOINT PRESS KIT: Don’t let removing and installing ball joints be complicated.
  • Remove ball joints quickly and easily with our ball....
  • VERSTAILE BALL JOINT PRESS: Maintain the health of your suspension system.
  • Our ball joint tool kit works on U joints, brake anchor pins, and more.
  • DURABLE DIY TOOL: Get a ball joint puller kit that pays for itself.
  • Easy to use, our ball joints press kit is excellent for saving on the expense of....
  • PRACTICAL JOINT PRESS: Remove and install ball and U joints with ball joint puller set's selection of adapters.
  • EFFECTIVE PRESS KIT: Don’t rely on makeshift methods and lesser C-clamps to do a heavy duty job.
  • Our ball joints kit system is the best way to....
Check Stock

Zouminyy Motor Shaft Coupling Universal Joint Connector U Joint Coupler ID 12mm OD 24mm for Model

  • Made Of Premium Metal Material, It Is Durable And Has Long Service Life..
  • This Joint Or Coupling Connects Rigid Rods Whose Axes Are Inclined To Each Other..
  • Rotatable Joints Can Be Bent, It Is Very Easy To Use. It Is Exquisite And Compact And Light In Weight..
  • It Is Commonly Used For Shafts That Transmit Rotary Motion..
  • Ideal Accessories For Rc Model Motor, Such As Model Airplane, Boats And Robots..
Check Stock

Strong Ball Joint,U-Joints and Brake Anchor Pins Press and Removal Tools丨Universal Installation Kit for Pre-pressed Upper or Lower Control Arms

  • This Dynofit U joint and brake anchor pins for Most 2WD and 4WD Cars and Light Trucks, Heat Treated C Clamp Puller is made of high quality material which can excellent press rusted parts effortlessly and it’s not easy to bent..
  • This Ball Joint Press Kits has a wide range of applications, it can not only be used to remove ball joints, but also U-joints and brake anchor pins, the operation is easy which won’t take a long time..
  • Package:10pcs as pic shown in box, 7/8" (22mm)socket recommended, and the exquisite plastic is through heat treated which make the surface more beautiful, you are not only got a set of tool, you also got a nice gift..
  • Well Made: better finish, more smooth screw, flat machined to keep sitting flush against the ball or u-joint, air damping new design thread for little accurate adjustment!.
  • Brand Promise: 1 year warranty, free return replacement or refund if missing parts, thread problems or anything else.
Check Stock

ABN Extra Large Ball Joint Press Kit Wheel Bearing Press Kit - Universal Ball Joint Separator Tool and Removal Adapters

  • [Easily Service Your Vehicle]: Keep your suspension system running smoothly by replacing worn or rusted ball joints with the ABN Ball Joint Removal Tool Set.
  • Use as ball joint puller kit, control arm bushing tools, U joint press kit, or tie rod and track pin press set.
  • [Fits Your Project]: Ball joint press kit heavy duty 4x4 U joint removal tool kit fits most 2 and 4 wheel-drive domestic and imported cars, pickup trucks, and SUVs with press-fit type ball joints.
  • Ball joint compressor control arm bushing press kit may even fit your tractor.
  • [Built To Last]: Professional-grade forged steel provides maximum strength and durability while the black oxide finish resists elemental damage and wear.
  • Ball joint kit will endure years of heavy use.
  • [Contents]: 11.5-inch (29.2cm) tall extra large ball joint press tool C-frame has 2 interchangeable pressure screws and a 3.5-inch (8.9cm) pressure screw head adapter.
  • Two 3-inch (7.6cm) wide stepped automotive press adapters fit the 10 and 6.5-inch (25.4 and 16.5cm) pressure screws.
  • [Convenient Storage]: 14.5 by 10.3-inch (36.8 x 26.2cm) plastic bl....
Check Stock

Timken NTA5266 Needle Bearing

  • Widely used for connecting model cars, model ships, robots, etc..
  • This joint or coupling connects rigid rods whose axes are inclined to each other..
  • Made of premium metal material, it is durable and has long service life..
  • It is commonly used for shafts that transmit rotary motion..
Check Stock

Timken B4416 Needle Bearing

  • It is commonly used for shafts that transmit rotary motion..
  • Widely used for connecting model cars, model ships, robots, etc..
  • Made of premium metal material, it is durable and has long service life..
  • This joint or coupling connects rigid rods whose axes are inclined to each other..
Check Stock

Nilfisk GM80 HEPA Vacuum, 110-120V, 3-1/4 Gal.

  • Ball-joint coupling give 360° freedom of movement.
Check Stock