ReviewsU shaped Clamps

HEIHAK 3 Packs 18 Inch Large C Clamp Locking Pliers with Swivel Pads, Heavy Duty Vice Grip Clamp Set, Adjustable Welding Clamps Tools for Woodworking Welding

  • 10Pcs x Locking Pliers Set : included Long Nose Pliers (5in. 6in. 9in.).
  • Curved Jaw Locking Pliers (4in. 5in. 7in. 10in.).
  • Straight Jaw Locking Pliers (7in. 10in.).
  • 2Pcs x Locking C Clamps 11 inch : 3-3/8 inch Max Jaw opening capacity, Welding C clamp pliers with Regular Tip and Swivel Pad, Provide stronger gripping and clamping.
  • 3Pcs x Welding Clamps : included Sheet metal clamp 8inch, U-shaped clamp 9 inch, 90 degree Offset locking pliers 7 inch.
  • Total 15 different types and sizes heavy duty Pliers Set, come with a nice nylon tool bag, good for storage and ideal gift for professional welder.
  • There's a hex Hole on knurled thumb screw for using with hex keys, offering greater tightens to adjust pressure and draw materials together.
Check Stock

Antenna Mast Clamp Cross-Over Bracket Kit with U Bolts for 1'-1.8' OD Poles, Heavy Duty Antenna Pole Mounting Hardware for MINO Yagi TV Antennas, Security Camera, Weather Station

  • Important: Only Clamps, Poles are not included!.
  • [Easy to Install] Mount 2 antenna mast poles at a 90°(cross or T shape) firmly, V jaw blocks and U-shape bolts would prevent it slip down..
  • [High Quality Made] Made of Q235 low carbon alloy steel that could effectively prevents rusting, and it is galvanized which provide oxidation and corrosion proof..
  • [Widely Used] Long time service antnena pole mount that suitable for mino antennas, yagi antenna, TV antenna, weather station, security camera, solar panel, LED street light etc..
  • [Heavy Duty Hardware] 3mm thick steel plate for heavier mast and not easy to be bent, can strongly against winds and extreme weather to keep your device safe. The entire hardware can be used for poles 1"-1.8" in diameter.
  • [Package Included] The package contains 1*steel plate, 4*U-bolt, 8*nut, 8*washer, 8*grommet. If you have any issues about it, contact us freely..
Check Stock

MAXPOWER 15-pieces Locking Pliers with C-clamps Set, Long Nose Pliers, Pinch Off Pliers, Sheet Metal Clamp, U Shaped Pliers with Tool Bag for Storage

  • 10Pcs x Locking Pliers Set : included Long Nose Pliers (5in. 6in. 9in.).
  • Curved Jaw Locking Pliers (4in. 5in. 7in. 10in.).
  • Straight Jaw Locking Pliers (7in. 10in.).
  • 2Pcs x Locking C Clamps 11 inch : 3-3/8 inch Max Jaw opening capacity, Welding C clamp pliers with Regular Tip and Swivel Pad, Provide stronger gripping and clamping.
  • 3Pcs x Welding Clamps : included Sheet metal clamp 8inch, U-shaped clamp 9 inch, 90 degree Offset locking pliers 7 inch.
  • Total 15 different types and sizes heavy duty Pliers Set, come with a nice nylon tool bag, good for storage and ideal gift for professional welder.
  • There's a hex Hole on knurled thumb screw for using with hex keys, offering greater tightens to adjust pressure and draw materials together.
Check Stock

ZQULOYO 4 PCS Universal Stainless Steel Roof Box U-Bolt Clamps Rooftop Cargo Carrier Rack Bolts Car Van mounting Accessories U-Bracket Clips with 8 Lock Nuts 2 Strap Kit for Most Cars

  • 【FITMENT】This roof box u bolt clamps is suitable for most cars on the market, can be used for up 85mm(3.34 inch) width and 40mm(1.57 inch) thick luggage rack..
  • 【HIGH-QUALITY MATERIAL】u-bolt clamps using galvanized steel material, durable, good alkali resistance, acid resistance, corrosion resistance, strong temperature resistance..
  • 【FEATURE】This product has a rubber gasket and a plastic back plate，which can protect your car from scratches to the greatest extent, and can increase friction to improve overall stability..
  • 【EASY TO INSTALL】: No need to drill and install directly. Accurate mounting size and long-enough bandages, suit your roof box and daily opening and closing box..
  • 【PACKAGE INCLUDED】 Roof box rack mounting fitting U-Bolt clamp kits included 4pcs galvanized U bolts, 4pcs plastic backplane, 4pcs rubber gasket, 8pcs heavy lock nuts, 2 bandages，1 Hole Sealing Sticker..
Check Stock

WYKA 16mm Heavy Duty 2 Hole U-Tube Strap Clamp,10 Pcs Stainless Steel-304 Rigid U-Bracket Pipe Strap,Wire Cable Clip Fastener(ID 5/8 Inch)

  • 003cp003eThis clamp fits for 0.4 inch(12mm) diameter pipe. 003c/p003e.
  • 【Size and Quantity Varieties】---M5, M8, M10, M12, M14, M16, M20, M22, M25, M27, M32, M35, M40, M42, M45, M50, M60, M63, M65, M70, M75, M80, M90 , M100, M110, M120, M130, M140, M150, M160, M170, M200..
  • 【U-shaped Pipe Clamp】---The U-Tube Strap Clamp is corrosion resistant, can continue to be bent and tough, and can be fixed on the wall with screws or expansion screws..
  • 【High-quality Materials】 --- The U-Tube Strap Clamp is made of 304 stainless steel, with a rigid thickness of 0.6 mm, our pipe clamps are highly resistant to corrosion and rust, and are durable..
  • 【Easy to Install】 --- It can be installed only with screws, convenient and fast, heat-resistant and cold-shrinkable, surface polished, anti-oxidation, long-term use..
Check Stock

Buyers Products RC10S Small Rubber Clamp

  • IN STOCK – SHIPS TODAY! Hold shovels and other equipment securely..
  • Clamps anything from 1 inch to 2.25 inch diameter. Holds up to 25 lbs (2 clamps support 50 lbs)..
Check Stock

DE-STA-CO 812-U Pneumatic Hold-Down Clamp with U-Bar, 150 lb Hold Capacity

  • Low-profile, compact clamp fits in tight workspaces.
  • Built-in air flow control provides smoother operation during repetitive clamping operations than manual clamps.
  • Holding screw moves on the U-shaped hold-down bar for larger clearance angle.
  • Holding capacity is 150 lb. and maximum clamp bar opening is 99 degrees.
  • Port size is M5, operating temperature is -10 degrees F to 165 degrees F, and maximum inlet pressure is 53 psi.
Check Stock

ForGoldPearl Cable Railing Kits and 304 Stainless Steel Wire Rope Cable Tension Kits

  • What you get: 50ft PVC Coated Wire Rope, 5PCS M5 eye turnbuckle, 10 pcs M2 Wire Rope Thimbles, 10 pcs M5 Wire Eye Straps, 20 pcs Aluminum Crimping....
  • Material: Made of 304 stainless steel, offers good corrosion resistance and rust resistance.
  • crimping loop sleeve are made of aluminum, hard and....
  • Insulated PVC-Coated cable of smooth surface prevent the wire rope getting rusty.
  • Suitable for outdoor applications of tent rope,clotheslines,hanging outdoor lights,deck cable railing and etc..
  • For a safe connection, make sure to use the right number of clamps and the U-shaped bolts must be tightened.
Check Stock

East Lake Axle replacement for front left cv axle Arctic Cat 550/650 / 700 Prowler 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015

  • 1, 【What Will You Get】We prepared 12Pcs small stainless steel cv boot clamps and 12Pcs large clamps for fixing cv boots in this kit!.
  • 2, 【Wide Application】Suitable for inner or outet CV joints on most cars and light commercial vehicles, 100% brand new , professional manufacturing, steel clamp is the best replacement for your old one. A perfect replacement for your car broken drive shaft CV boot clamp..
  • 3, 【Simple to Use 】There is the band that goes round the boot, and then a part of it sticks up like a upside down U and the rest of the band clips into place over the other end of the band making a full loop. You get it as tight as you can then use the pliers to pinch the U shut to tighten it the rest of the way. This would be easier with a drawing..
  • 4, 【 High Quality】The cv boot clamps are made of non-magnetic stainless steel material, which is an ideal choice for areas that get a lot of rainfall or snow because the metal is resistant to rusting and very durable..
  • 5, 【100% Satisfaction Guarantee 】 We promise to provide every customers with 100% satisfying shopping experience. If you come across any issues during use our products, please feel free to contact us by email, we will be here to help..
Check Stock

DE-STA-CO 810-U Pneumatic Hold-Down Clamp with U-Bar, 600 lb Hold Capacity

  • Built-in air flow control provides smoother operation during repetitive clamping operations compared to manual clamps.
  • U-shaped hold-down bar for larger clearance angle when used with a holding screw (not included).
  • Magnetic ring piston accommodates round or T-slot sensors.
  • Holding capacity is 600 lb. and maximum clamp bar opening is 99 degrees.
  • Port size is 1/8" NPT, operating temperature is -14 degrees F to +195 degrees F, and maximum inlet pressure is 51 psi.
Check Stock

Cimeton 11Pcs Hose Clamp Pliers Set Including 3Pcs Hose Clamp Pliers, 1Pc Car Water Pipe Locking Pliers and 6Pcs Hose Removal Hooks Set for Hose Installations

  • ✅ [High Quality Material]: This hose clamp pliers set are made of heavy duty carbon steel and firm handles, you don’t need to worry about hose clamp pliers will damage your hoses. It is professional hose clamp pliers set and easy to dismantle flat or ring hose clamps..
  • ✅ [What You Can Get]: You can get 3pcs hose pinch pliers, 1pc water pipe hose clamp pliers and tool box, 6pcs hose removal hooks with different sizes and types, totally 11pcs. It is a complete hose clamp pliers kit and you don’t need to buy others..
  • ✅[Hose Clamp Pliers Set]: Our o shape hose clamp pliers is flat, it is easy to get into those tight spaces and complete the job. Tips swivel can allow access in confined areas and be used at any angle. And three sizes hose pinch pliers can meet your different needs. Special buckle design makes it can be caught by a safety buckle according to the size of the clamp. Our hose pinch pliers can prevent most liquids from getting dirty and prevent air from escaping..
  • ✅ [With 2Pcs Hose Removal Hook Set]: This kit included a U type and V type hose removal hook with red handle. It can be installed between various fittings and hoses. It is essential tool for fixing CV boots and flattens clamps on ear type CV joint boot clamps..
Check Stock