ReviewsUl T8 Ballast

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 3000K

  • ...ING: All electrical wiring and installation of this product should be performed by a qualified electrician to NEC standards. Although these lights may be used with your existing shunted or non-shunted tombstones, we highly recommend replacing aging tombstones with new ones to avoid potential arcing and overheating..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house ....
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 5000K

  • ...ING: All electrical wiring and installation of this product should be performed by a qualified electrician to NEC standards. Although these lights may be used with your existing shunted or non-shunted tombstones, we highly recommend replacing aging tombstones with new ones to avoid potential arcing and overheating..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house ....
Check Stock

20 Pack 4FT LED T8 Hybrid Type A+B Light Tube, 18W, Plug & Play or Ballast Bypass, Single-Ended OR Double-Ended, 5000K, 2400lm, Frosted Cover, T8 T10 T12 for G13, , 120-277V, UL Listed

  • ✅ Work With or Without a Ballast - This tubes are designed to work in a plug-and-play fashion with your current fluorescent ballast or without a ballast (direct installation). Check the ballast compatibility full list of fluorescent ballasts that are compatible with these LED tube lights..
  • ✅ Single or Dual ended Connection - This T8 LED bulbs 4 foot convenient for installation with a single-ended or double-ended connection. They work best for your garage, warehouse, or office storage areas, fabrication floors, retail spaces, hospitality..
  • ✅ High Quality - led T8 tube uses high quality LEDs which are more energy saving and environmental protection (no UV, IR, or mercury). UL Listed for better quality, safety, reliability and have longer lifetime up to 50,000 hours than halogen/incandescent/fluorescent bulbs..
  • ✅ Shatterproof - These led t8 are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
  • ✅ 5 Years Warranty - ALL our LED luminaires are confidently guaranteed for 5 years! We aim for quality followed up with quality customer service directly provided by manufacturer. We offer free-exchange for any product quality problems within warranty, our support t....
Check Stock

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 5000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
Check Stock

Luxrite 4FT T8 LED Tube Light, Ballast and Ballast Bypass Compatible, 13W=32W, 4000K Cool White, Single-End or Double-End Powered, Plug & Play, F32T8 Fluorescent Tube Replacement, Damp Rated (4 Pack)

  • UNIVERSAL INSTALL - Use these 4 foot LED tube lights with your existing fixture in any type of setup. Whether you are using an existing ballast or in a direct wire connection, these plug and play lights will work with ease. Each LED t8 bulb can be either single-end or dual-end powered and will work with standard 120 volts or 277 volts installations. Check extensive ballast list for compatibility..
  • BRIGHT - Every LED light tube provides your 4 ft light fixtures with 1900 lumens of crisp, quality light that will brighten your space more efficiently than your standard 48 inch fluorescent tube lights, equivalent to 146 lm/W. Use these in your shop, garage, workshop, office, basement, indoor, outdoor, or anywhere in your home requiring tube light bulbs..
  • SAVE ENERGY - Cut the cost of your energy usage by up to 59% when you use these 13 watt 4ft LED light bulbs which are the perfect replacement to 32 watt fluorescent tubes. Save yourself time and money by making the switch to energy efficient lighting that is brighter and longer lasting..
  • CONTINUOUS LIGHT - Built with an astounding 50,000 hours of lifetime which means no replacement will be needed for the next 45 years. Each t8 LED bulbs 4 foot lasts 3.8x longer than traditional tube lights and at a frac....
Check Stock

Sunco Lighting 50 Pack T8 LED 4FT Tube Light Bulbs Ballast Bypass Fluorescent Replacement, 5000K Daylight, 18W, Clear Cover, Retrofit, Single Ended Power (SEP), Commercial Grade – UL, DLC

  • Top Rated Clear 18W T8 LED Tube Single Sided Ballast Bypass Type B with G13 Base.
  • ✅ SINGLE ENDED POWER (SEP)- Convert existing fixtures to LED for instant energy savings (up to 85%). Sunco T8 LED tubes help you avoid costly ballast replacement and provide instant bright light with no flickering..
  • ✅ COMMERCIAL GRADE - We test each product for optimal performance and safety. Certifications: UL, DLC, FCC, RoHS. Specifications: Length 4ft (48"), 120-277V, 160° Beam Angle, Instant On, 50,000 hour Lifetime..
  • ✅ EASY INSTALL – Follow our installation guide for a quick and easy setup. Rewire your fixture to disconnect and remove or bypass the existing ballast, then connect live and neutral wires from the power source to corresponding socket wiring. Requires non-shunted tombstones (not included)..
  • ✅ SUNCO BENEFITS - 5-Year Warranty! Sunco is proudly based in the USA, offering quality products at affordable prices backed by industry-leading warranties and knowledgeable support specialists..
Check Stock

Keystone KTEB-120-1-TP-EMI Fluorescent Ballast 1-Lamp F20T12 20W T12 120V

  • F20T8, F20T12, F18T8, F17T8, F15T8, F15T12, F14T8 or F14T12.
  • Keystone KTEB-120-1-TP-EMI electronic rapid start T12/T8 ballast..
Check Stock

Sunlite 40199 LED T8 Ballast Bypass Light Tube (Type B) 8 ft, 43 Watt 59W Equivalent (F86T8 Replacement), 5500 Lumens R17D Base, Dual End Connection, Shatterproof UL Listed, 4000K Cool White, 10 Pack

  • ...s from Sunlite. They are instant on at full brightness with no buzzing or flickering. Glass outer tubes prevent yellowing and bending over time. Our wide 170° beam angle with shatterproof glass gives you great light coverage. High Color Rendering Index (CRI) rating of 82.
  • BALLAST BYPASS REQUIRED - These bulbs are direct replacements for 8 foot T8 R17D base fluorescent tubes. You must bypass the ballast in all fixtures before installing these bulbs. Simple instructions can be found online or consult an electrician for more information.
  • ENERGY EFFICIENT - With a life-span of up to 50,000 hours each bulb puts out a bright 5500 lumens of light with a 4000K Cool White color temperature while only using 43 watts of electricity. Annual energy costs are a low $5.18 (Based on 3 hours/day at $0.11/kWh).
  • DLC AND UL LISTED - These shatterproof led bulbs are UL Listed and have been tested to meet their rigorous safety standards, they are also DLC listed for quality and efficiency. Suitable for enclosed fixtures.
  • FOOD & RESTAURANT SAFE - This T8 bulb is covered with pet film which prev....
Check Stock

GE Lighting 78619 GE332MAX-H/ULTRA 120/277-Volt UltraMax Electronic Fluorescent T8 Multi-Volt Instant Start Ballast 3 or 2 F32T8 Lamps

  • Multi-volt Instant Start T8 Ballast will accept up to 3 or 2 F32T8 lamps.
  • Accommodates multi-voltages from 120 to 277-volts, extra versatile for your unique projects.
  • Cool operation casing is rated UL55C at 131-Degree Fahrenheit, suitable for high temperature applications.
  • UL Type CC Rating provides protection against arcing in electrical components.
  • Mounting dimensions: 9-Inch L x 0.9-Inch W, Mounting slot set 0.3-Inch apart.
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL - 5000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
  • ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable.UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, UL - 4000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
  • ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
Check Stock