ReviewsUltimate Clamping Strength

O'SKOOL Self Centering Dowel Jig Kit Drilling Guide Bushings Set Wood Wide Capacity Doweling Jig Puncher Locator Joints Tool

Guide hole sizes are 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch. Package induldes: Dowel jig x1.
Our jig is patented and easy to adjust ,and can be clamped on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling and wood board joints, it is an ideal tool for panel furniture..
The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
The drilling bushing is made of high-quality materials, with high strength and accurate positioning. When using a hand held drilling machinel, the countersunk drill bushing allows the drill bit to slide into the hole easily, ensuring the correct angle of the drill bit..
There are 4 holes along the top of the jig, only 2 of the holes accept threaded bushings(Replaceable 1/4" 3/8" 5/16").the other two holes accept 7/16" and 1/2" drill bits..

Check Stock

Hand Wheel, 250x22mm Lathe Handwheel for Machine Tool

DURABLE MATERIALS: Made of 40Cr and carbon steel materials, with carburizing and quenching process, high hardness and strength..
INTEGRATED FORMING: The inside and outside of the tool holder are integrally formed, fine control processing, with stable performance..
HIGH ACCURACY: Inner hole grinding treatment, has high concentricity, suitable for high accuracy machine tool processing..
CLAMPING RANGE: The clamping range of the extension rod is 1‑7mm, standard in size, and it is suitable for ER11 collet..
WITH WRENCH: Equipped with a wrench, stable in processing, and can effective vibration suppression..

Check Stock

Z011 3-Jaw Lathe Chuck, 10-35mm Zinc Alloy Mini Lathe Chuck, Self Centering Wood Turning Chuck with Connecting Rod for Mini Lathe, Power Lathe Accessories

Material: Made up of zinc alloy material, good corrosion resistance, not easy to rust. High strength and hardness, small size, comfortable to wear..
Clamping Range: The clamping range of this chuck is between 10-35mm(0.39-1.38inch), which is suitable for clamping a variety of industrial parts..
Application: Design of three jaws, self-centering, widely used for woodworking lathe..
Accurate: The high precision design of the chuck-bevel gear guarantees the accuracy of the chuck operation..
Compact Size(D*H): About48x21mm/1.89x0.83inch. The compact chuck is small in volume, easy to use..

Check Stock

Router Lift, Metal Router Lift System Kit for Router Table Saw Insert Base Plate, 4 Jaw Clamping, with Strong Grip

DIY ROUTER LIFT TABLE: This lifter base is suitable for making your own router worktable for high precise woodworking, easy to install and operate. NOTE: Only include lift part, not included insert plate! The other parts pictured are for display purposes only and need to be purchased separately (link on the details page below).
FIRM CLAMPING: The router lift base adopts 4 jaw clamping way, the clamping is firm and stable, not easy to fall off..
WIDE LIFTING RANGE: The base supports lifting height up to 51mm, supports machine diameter is 64mm to 66mm, ideal for small trimming machines..
EXCELLENT MATERIALS: Composed of aluminum alloy body and stainless steel support rod, with high strength, rust and corrosion resistance..
EASY ADJUSTMENT: Come with crank handle, you can easily and accurately adjust the height of the router bit from above the desktop..

Check Stock

Raynesys Bench Vise, 4-1/2\ for Workbench, 4.5 Inch Table Vise Heavy Duty with 260° Flexible Swivel Base for Woodworking, Metalworking, Cutting Conduit, Drilling - Blue

【Universal 4.5 Inch Bench Vise】: Jaw Width 4.5inch/11.5cm.
Maximum Opening of Jaw is up to 4.3inch/11cm.
Throat Depth 2.4inch/6cm. Clamping Force: 10KN.
this bench vise fits most workbench, and kinds of thickness of tables..
【Multifunctional】: Mounting vise on the workbench, then you could do the work of woodworking, cutting conduit, drilling, gluing, metalworking, sanding or planing, sawing, etc. It can be used indoors or outdoors. Convenient and quick to install on or remove from kinds of workbench..
【Heavy Duty Casting】: Made of high strength ductile iron and chrome-plated spindle and nuts, durable for long-term use and reliable to grip. The jaw adopts quenching and re-fire technology to increase its hardness and strength. Non-slip textured surface increases the grip force of jaw, which firmly holds the material, save time and effort when you work..
【Swivel Feature】: Built in 260 degree swivel base, perfect for a wide range of clamping angles. It allows an ever greater degree of accuracy while you are working with a hand tool as there is no need to keep inserting and removing the piece you are working on..
【Rubber Jaws Covers】: Packaged with 125mm rubber vise jaw covers, can be used on any metal vise for holding wood, metal, plasti....

Check Stock

JORGENSEN 48-inch Bar Clamps, 90°Cabinet Master Parallel Jaw Bar Clamp Set, 2-pack

Heavy-duty steel jaws and high-carbon steel bar for up to 1500 lbs. of clamping force..
A reversible head enables spreader clamping and a clamp stand provides easy adjustments, while the maple handles won't wear down your hands..
Reinforced steel and castings protected by orange plastic add strength to the jaws..
Ideal for a wide range of woodworking such as panel glue-ups, boxes, cabinets, frames and raised panel doors..

Check Stock

Wurlitzer K7 Actuator Aftermarket Jukebox Part

RUST PROOF ALUMINUM ALLOY: The guide rail bracket is made of good quality aluminum alloy, which is rust proof and wear resistant. The is sandblasted and oxidized. Light in weight, high in strength, heavy in load and durable.
LOW FRICTION: Rail clamping rod possess low frictional resistance, movement, high rotation accuracy and low vibration.
ACCURATE ROTATE: Linear motion rail clamping guide support can get high accuracy rotation in motion, easy to maintain and replace.
MORE SECURE AND STABLE: Linear bearing bracket is an exquisite base, provide more secure fixation and quality assurance.
WIDE APPLICATIONS: Linear optical axes brackets are suitable for various electronic equipment guide rods, drive shafts and struts, and have a wide range of applications.

Check Stock

JORGENSEN 36-inch Bar Clamps, 90°Cabinet Master Parallel Jaw Bar Clamp Set, 2-pack

Heavy-duty steel jaws and high-carbon steel bar for up to 1500 lbs. of clamping force..
A reversible head enables spreader clamping and a clamp stand provides easy adjustments, while the maple handles won't wear down your hands..
Reinforced steel and castings protected by orange plastic add strength to the jaws..
Ideal for a wide range of woodworking such as panel glue-ups, boxes, cabinets, frames and raised panel doors..

Check Stock

OrangeA K11-200 Lathe Chuck 8 Inch 3 Jaw,Self Centering Chuck Hardened Steel Jaws,Internal External Grinding for Lathe Drilling Milling Machine

Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..

Check Stock

OrangeA K11-250 Lathe Chuck 10 Inch 3 Jaw, Self Centering Chuck Milling Hardened Steel, Internal External Grinding for Lathe Drilling Milling Machine

Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.24" / 6 mm - 9.84" / 250 mm, which is suitable for clamping a variety of industrial parts..
Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..

Check Stock

Houseables Spring Clamp, A Clamps, Hand Squeeze Clips, 6 Inch, Metal, 8 Pack, Orange, Heavy Duty, Large, Strong, Quick Grip, Strong Hardware Claps for Woodworking, Wood, Pony, Photography, Furniture

INDUSTRIAL GRADE CLAMPS - Our heavy duty clamps provide you with industrial strength clamping action for gluing, clamping, gripping any home or DIY projects. The strong and reliable grip won’t give way and will hold almost all materials.
3 INCH JAW-OPENING: Our clamps provides you with 3 inches of maximum opening mouth so you can fit it around thick boards, poles, walls, and more. Clamp photography backdrops to stands without slipping or sliding.
STRONG CLAMPING HOLD: The downward clamping force is reliable with a strong hold. Our heavy-duty spring clamps will be your tool of choice for projects where you need extra hold. The PVC coated tips will keep the metal clamp from digging in and destroying projects.
8 HEAVY DUTY CLAMPS: You’ll receive 8 heavy duty clamps per pack. Each clamp is 6 inches in length with PVC coated handles for a soft yet strong grip. More than enough clamps for multiple projects. Stiff enough for a stronghold, yet just enough give for easy handling.
GRIP’S CHOICE: Our heavy duty clips are every set grip’s choice. Perfect for rigging lights, sets, and anything else you might need a clip for!.

Check Stock