ReviewsUltra low Profile Jack

Walker's GWP-RSEMPAT-FDE Electronic Muffs

  • PROTECT YOUR HEARING - Walker's Razor Ear Muffs have an ultra low-profile design featuring extra slim ear cups, for a secure fit.
  • these ear muffs protect against hazardous noises, while still letting you clearly hear everything going on around you.
  • SOUND AMPLIFICATION - Walker’s Razor Ear Muffs amplify safe sounds using two hi-gain microphones to provide clear omni-directional hearing.
  • The low end frequencies are enhanced to produce accurate, natural sound.
  • RUGGED DESIGN - These muffs feature a rugged design with a rubberized coating, helping to prevent damage to the interior electronics.
  • the housing is made from a sound dampening composite.
  • the headband is a padded metal wire frame.
  • EASY-TO-USE CONTROLS - These muffs have a volume control knob on the outside that is slightly recessed - a perfect balance between providing easy-to-use controls, and preventing accidental volume adjustments.
  • the battery door also opens from the exterior.
  • LISTEN TO MUSIC - These ear muffs also have an audio input jack, allowing you to plug in your phone or other favorite sound source, effectively converting these ear muffs into a set of headphones with hearing protection.
Check Stock

Pake Handling Tools Multi-Purpose Hydraulic Jack (5T) - Toe Jack - Heavy Duty Compact 360 Degree Rotation 11023lbs Capacity

  • MULTI-USE JACK: Use this quality, compact hydraulic jack for repairs, maintenance, or installation of heavy machines..
  • CONVENIENT HEIGHT: Lifts 1-9” and has a head lifting range of 14.5-22.5” to give ample room for maintenance..
  • POWERFUL: Capable of lifting 5 tons/11,023 pounds with ease..
  • 360° ROTATION: Can be used horizontally and vertically – the most convenient hydraulic jack yet!.
  • COMPACT SIZE: The low profile, compact design makes this jack easy to store and transport..
Check Stock

Jack Reacher

  • Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) capacity.
  • Constructed of durable, high-strength steel.
  • Equipped with a single piston quick lift pump, allowing you to easily raise the jack to the desired height.
  • Lifting range from 3-7/10" to 18-7/100" allows you can gain easy access under low-profile vehicles.
  • Foam bumper on the handle helps protect your vehicle from damage.
Check Stock

JEGS 80077K4 3-Ton Aluminum Floor Jack Kit Includes: Floor Jack Jack Stands Whee

  • (1) JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack....
Check Stock

Simplex RJ84A Steel Mechanical Ratchet Jack, 5 Ton Capacity with 7\ Stroke

  • [LOW PROFILE] - Low Profile with lifting range 3-3/20" to 14".
  • Dual pump quick start: 7 pumps (no load).
  • [HYBRID ALUMINUM] - Hybrid aluminum & steel construction provides stability and endurance. Total 36 LBs weight. Light weight!.
  • [EASY TO USE] - Swivel rear casters and saddle provide smooth maneuvering and positioning.
  • [OVERLOAD PROTECTION] - Built-in valve protects against jack over-loading.
  • [WARRANTY] - Covered by a 1 year warranty on material and workmanship.
Check Stock

Cable Matters 10-Pack Low Profile 4-Port Cat5e, Cat6 Keystone Jack Wall Plate in White

  • 4 port wall plate for keystone jacks creates an A/V cable patch location for a home theater media center or office conference room.
  • Accepts many types of keystone jacks including RJ45 Cat 6 Ethernet, HDMI, RG6 coax, banana plug, and more.
  • Single gang cover plate fits a standard-sized receptacle with the included mounting screws.
  • Add a new patch cable location using a low voltage mounting bracket.
  • Low profile cable wall plate with a cover that is almost flush with the wall.
  • Contemporary glossy design of this Ethernet wall jack outlet provides a professional looking installation.
  • Cost effective 10 pack of keystone jack wall plates provides enough outlet plates for a few renovation projects at home or in the office.
  • UL listed keystone jack (E486099) wall plate meets building specifications for low combustion wall outlets with flame-resistant, ABS plastic construction.
Check Stock

Alphastat Table Mat Grounding Kit - Universal Snap Kit and 15' 1 Meg Male Low Profile Ground Cord

  • TABLE MAT GROUND: A complete kit to install and ground ESD and Anti-Static table mats according to ANSI ESD S2020..
  • THICK OR THIN MATS: The kit includes a Universal Snap Kit that can install a 10mm snap or stud into materials up to 0.375" thick mats. Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station..
  • EASY INSTALLATION: The snap kit is installed into the mat with Philips head screw driver. The ground cord connects to that snap and the opposite end is connected to the center screw of an outlet.
  • MEETS ESD STANDARDS: A buried 1 meg resistor is included for safety. ESD Standards require 1 ground point per mat or every 10ft of ESD matting. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1..
  • Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station..
Check Stock

Jackco 3 Ton Low Profile Aluminum Racing Floor Jack with 3 Ton Aluminum Jack Stands

  • 3 Ton Aluminum Low Profile Racing Jack: Aircraft billet aluminum construction Dual Plunger for quick lift.
  • 3 Ton Aluminum Jack Stands: Aircraft-grade aluminum Lightweight - less than 5 lbs. each 6 adjusting positions from 9.5” to 15.25”.
Check Stock

Walker's Game Ear Razor Slim Electronic Muff - Flat Dark Earth

  • PROTECT YOUR HEARING - Walker's Razor Ear Muffs have an ultra low-profile design featuring extra slim ear cups, for a secure fit.
  • these ear muffs protect against hazardous noises, while still letting you clearly hear everything going on around you.
  • SOUND AMPLIFICATION - Walker’s Razor Ear Muffs amplify safe sounds using two hi-gain microphones to provide clear omni-directional hearing.
  • The low end frequencies are enhanced to produce accurate, natural sound.
  • RUGGED DESIGN - These muffs feature a rugged design with a rubberized coating, helping to prevent damage to the interior electronics.
  • the housing is made from a sound dampening composite.
  • the headband is a padded metal wire frame.
  • EASY-TO-USE CONTROLS - These muffs have a volume control knob on the outside that is slightly recessed - a perfect balance between providing easy-to-use controls, and preventing accidental volume adjustments.
  • the battery door also opens from the exterior.
  • LISTEN TO MUSIC - These ear muffs also have an audio input jack, allowing you to plug in your phone or other favorite sound source, effectively converting these ear muffs into a set of headphones with hearing protection.
Check Stock

Chief TS318SU Medium Swing Arm Single Stud Mount for 26-52 Inch Displays,Black

  • Ultra low profile sleek design collapses to 1.3" (33 mm), providing an ultra-low profile for all types of TVs, including LED, LCD and Plasma..
  • Extends up to 18" (457 mm) full extension maximizes viewing potential..
  • Centuries low-profile tilt provides up to 15° of effortless fingertip tilt to achieve optimal viewing angles..
  • Integrated cable management enclosed, tool-free cable covers and a wide-open wall plate make it easy to route power and signal cables, and connect to the wall for seamless installation..
  • Post installation height adjustment A total of 1" (25mm) of post installation height adjustment allows for perfect screen placement and alignment.
Check Stock

Walker's GWP-RSEMPAT-ODG GWP-RSEMPAT-ODG Hunting Earmuffs

  • PROTECT YOUR HEARING - Walker's Razor Ear Muffs have an ultra low-profile design featuring extra slim ear cups, for a secure fit.
  • these ear muffs protect against hazardous noises, while still letting you clearly hear everything going on around you.
  • SOUND AMPLIFICATION - Walker’s Razor Ear Muffs amplify safe sounds using two hi-gain microphones to provide clear omni-directional hearing.
  • The low end frequencies are enhanced to produce accurate, natural sound.
  • RUGGED DESIGN - These muffs feature a rugged design with a rubberized coating, helping to prevent damage to the interior electronics.
  • the housing is made from a sound dampening composite.
  • the headband is a padded metal wire frame.
  • EASY-TO-USE CONTROLS - These muffs have a volume control knob on the outside that is slightly recessed - a perfect balance between providing easy-to-use controls, and preventing accidental volume adjustments.
  • the battery door also opens from the exterior.
  • LISTEN TO MUSIC - These ear muffs also have an audio input jack, allowing you to plug in your phone or other favorite sound source, effectively converting these ear muffs into a set of headphones with hearing protection.
Check Stock