ReviewsUltraviolet Curing Agent

OSRAM HBO R 103W / 45 Mercury Short-Arc Discharge Lamp with Reflector

  • Reflector discharge lamp with intense point source providing a broad spectrum through the visible and ultraviolet range.
  • OEM replacement bulb for equipment in the medical & scientific fields, including microscopy, fluoresence, fiber illumination, surgical lighting, and UV curing.
  • Wattage: 100W, Voltage Range: 20-25V, Current: DC, Average Lifetime: 300hrs, Special Characteristics: precision reflector alignment.
  • Reflector light source especially designed to ensure high arc stability.
  • Reflectorized lamp used often in UV spot curing equipment.
Check Stock

REALINN Epoxy Tile Grout Bright Porcelain White 400 ml, Dual Tube Waterproof Stain-Proof Colorant Resin Sealer, Restore and Spruce Up Tile Grout Line for Bathroom Kitchen Wall Floor

  • Epoxy Grout, made of epoxy resins combined with curing agent, pigment. Advanced double tube design, easy to apply, no mixer pre-mix, just one double tube epoxy gun to finish the job. (NOTE: Caulking gun and tools are not included. ).
  • Color: Bright Porcelain White. Even color, long lasting and no discoloration. Non-hazardous, no unpleasant odor..
  • Strong and durable, with greater bond strength and greater flexibility. Heat and cold resistant, no cracking, shrinkage or discoloration..
  • Waterproof and stain-proof, widely used in tile showers and kitchens, floors and walls, splashback tiling over vanities and countertop, surfaces underneath sinks or basins, swimming pools, could use both indoor and outdoor. Ideal replacement for regular grout and sealant caulk..
  • Kit includes: Double tube epoxy grout (200g for tube A + 200g for tube B) + 3 static mixing nozzle. Tips: When using the first time, please squeeze out grout about 30 cm and discard. Prevent failure to dry and poor adhesion due to uneven mixing of pigment and curing agent..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against mold hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL Film #10 Polyvinyl Alcohol (PVA) Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Half Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against surface hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL ® Film #10 Polyvinyl Alcohol (PVA) Half Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned surfaces can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble.
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).
Check Stock

OSRAM HXP R 120W / 45C UV Mercury Short-Arc Discharge Lamp with Reflector

  • Reflector discharge lamp with intense point source providing a broad spectrum through the visible and ultraviolet range.
  • OEM replacement bulb for equipment in the medical & scientific fields, including microscopy, fluoresence, fiber illumination, UV curing and solar simulation.
  • Wattage: 120W, Voltage Range: 60-90V, Current: AC, Average Lifetime: 2,000hrs, Special Characteristics: designed with enhanced UV output.
  • Compact, reflector light source with very high luminance and long lifetimes.
  • Specially designed to ensure high arc stability and provides enhanced output in the ultraviolet range..
Check Stock

Bewinner UV Glue Curing Lamp Ultraviolet 3W USB LED Purple Light - LED Lamp Bead,Wavelength: 395 - USB Powered,Support Plug and Play - Wide for Repairing Phones or Fluorescent Agent Detection

  • 【Multi-Purpose Maintenance Light】UV glue curing LED purple light is used for cell phone circuit board repair. It can also be used for fluorescent agent detection and fluorescent banknotes..
  • 【Flexible Uv Glue Curing Lamp】The gooseneck can be bent freely in 360 degrees, and the height and direction of the light can be flexibly adjusted to always find the ideal position. With fixing clip to ensure smooth and stable operation..
  • 【USB Powered】The UV glue curing lamp is equipped with a control switch and a USB power supply interface. It supports plug and play and is easy to use. 3W LED lamp beads, wavelength: 395, low power consumption, long life, safety and environmental protection..
  • 【Easy To Use】The UV glue curing lamp is equipped with a clip, which is very suitable for fixing on the bedside table, desk, laptop table, headboard, etc. The clip can be opened 3 to 5 cm, the metal arm can bend flexibly, but at the same time it can fix the position..
  • 【Quality Service】If the product has any quality problems or you have any questions about this product, you can contact us at any time,we have a 24-hour online professional customer service team.we will try our best to solve your problem in time,please rest assured to buy..
Check Stock

UV Resin Hard Type Crystal Clear Glue Ultraviolet Curing (100g Round Bottle)

  • PREMIUM - Ultraviolet resin cures crystal clear, glassy finish that provides excellent scratch resistant, stain resistance and yellowing resistance.
  • FAST CURE CLEAR UV RESIN: Our UV resin is ready to use anytime and can instantly cure hard in minutes with UV Lamp (The uv light wattage matters, the higher the watt the faster is cures. ) or strong sunlight.
  • SAFE - Our hard type uv resin is made of high-quality and non-toxic materials.There is an odor before curing, it is harmless and will completely disappear after curing. Environment friendly.
  • SIMPLE TO USE: Comes with small tip, you could just simply open and squeeze the uv resin out. Therefore, it will not cause unnecessary waste.
  • WIDELY USED - The clear UV glue can be used for jewelry making, crafts decorations, casting and coating, cast figurines and make resin paintings etc. It can also be mixed with mica powder, colorants, glitter to get colorful finishes.
Check Stock

Boekel 920-0307 Ultraviolet Bulb, Black, 368nm

  • Replacement ultraviolet bulb for hybridization applications such as crosslinking DNA or RNA samples, conducting blot analysis, or UV curing.
  • For use with the Boekel UV Crosslinker AH (sold separately).
Check Stock

Aoshang 5 pc UV Gel Painting DIY Design Nail Art 2 Way Dotting Pen Tool Nail Art Tip Dot Paint Manicure kit

  • ...emovable,soft and easy to clean, can fit any type of nail.Not suitable for metal or sharp ornaments. Suitable for crystals, dried flowers,stickers, nail foil, and other soft nail accessories or decor..
  • 【QUICK-DRYING】ANGNYA nail art stamper with mini UV nail lamp can provide good optical performance, super strong ultraviolet rays, faster phototherapy and quick-drying nail embossing than ordinary LEDs. The clear silicone head can flatten glitter, sequins and other accessories while pressing, so that the accessories stay flat on the nail surface..
  • 【DURABLE AND HIGH-QUALITY】The nail art stamper'appearance is composed of aluminum and with a clear silicone head, which is very soft to the touch and durable. The flashlight uses 3 AAA batteries (not included). The body lasts for several hours of light.Suitable for gel nails..
  • 【12 LED BEADS】The nail art stamper with nail UV lamp is a star-shaped nail toenail dryer, equipped with 12 LED lamp beads. The use of enhanced light sources no longer dizziness or eye discomfort. Ultraviolet rays are safe and will not affect nails or manicure..
  • 【ATTENTION】Since the silicone head is removable and replaceable, it is a greater risk of falling off when curing, we suggest to entangle the silicone head with a prese....
Check Stock