ReviewsUncoated Tap And Drill Bit Set

6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case

  • COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
  • No more using a drill to drill the hole and then tapping it out later with another tool..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
  • you can use them in aluminum, plastic, wood and other thin soft material metal panel.
  • When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock

6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC（Golden）

  • Complete Set: Set of 6 pcs drill bit tool, 6 different size tap drill bit, M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch, a variety of specifications to choose from, convenient for work..
  • 3-in-1 Combination Tap: Drilling - tapping - chamfering, three-in-one composite tap with hexagonal handle can be achieved in one step without frequent replacement, and the operation is more convenient and faster, high processing efficiency..
  • Professional Tools: The standard 1/4 inch hex shank can be installed on ordinary electric drills and bench drills, with strong locking force and not easy to slip. The pointed tap can be tapped to the bottom of the blind hole, large helix angle, better chip removal performance.
  • Premium Material: Our tapping bits are made of high-speed steel with titanium coating. They have high hardness, sharpness and wear resistance, high heat resistance and strong cutting performance. They are a good helper for cutting high-hardness materials..
  • Widely Application: Our tap drill bits have strong cutting toughness, suitable for various cutting series, processing range: copper, aluminum, brass, iron plate, steel, metal sheet, plastic and other metals..
Check Stock

5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS Metric/Imperial Plug Drill Bits Hand Tools 1/4-20NC

  • ★【Combination Drill Tap Bit】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC, 8-32NC, 10-32NC, 10-24NC, 12-24NC, 1/4-20NC.
  • ★【Quality Material】Made of High-speed Steel 4341, Hard, Rustproof, Solid and Durable.Bonderizing Surface protects the metal from corrosion. Improve the finish adhesion and corrosion resistance. High quality, long lasting and durable..
  • ★【Working Efficiently】These Combination Drill Tap Bit complete hole drilling, tapping, deburring and countersinking in one operation save processing steps and time costs, improve working efficiency..
  • ★【Perfect Design】1/4 inch Hex Shank,quick change for cordless drill. Back tapered beyond tap to prevent thread damage from over-drilling, And self-centering point, do not need assistant center drilling or center punching..
  • ★【Widely Application】Suitable for Low Hardness Materials Such as 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
Check Stock

Hymnorq Metric HSS 4341 Combination Drill and Tap Bit Set of 6pcs – Including M3, M4, M5, M6, M8, M10-1/4” Hex Shank and Self-centering Split Point - For Tapping in Wood Plastic and Aluminum

  • Back tapered beyond tap to prevent thread damage from over-drilling.
  • Deburr/countersink also provided on bit beyond back taper.
  • Quick change adaptor included in both metric and standard kits.
  • All operation in one time with power drill saves labor and time.
  • Made from hardened high-speed steel vs. carbon steel for longer life.
  • Point is self-centering and eliminates the need for center drilling or center punching.
  • 6 sizes in one drill and tap bit set (M3, M4, M5, M6, M8, M10) to meet your diversified requirements.
  • Drill and tap bits have high quality hex shank to confirm strong connection to drill chuck. Ideal for hole drilling, tapping and deburring/countersinking applications in wood, plank, mild steel, copper, brass and aluminum metals.
Check Stock

aiyun 6 Pack Titanium Combination Tap Drill Bit Set, Thread Tap Drill Bits Set M3-M10 Metric Drill and Tap Set

  • [What You Will Have] Set of 6 metric tap drill bit set M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5 Short size is not easy to shake and can drill accurately.
  • [Easy Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic greatly save processing steps and time costs, improve working efficiency.
  • [Material] HSS4341 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.
  • [Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • [Guarantee] Here at Rirui-tool we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please c....
Check Stock

KnKut 18 Piece National Course Tap/Drill Bit Set

  • No Center Punch or Pilot Hole required for drill bit.
Check Stock

TEMO 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit

  • 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit.
  • Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation..
  • Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling..
  • One piece construction guarantees proper drill for tap size. | 135 self-centering split point tip. 10 gauge (3.5mm) capacity. Usage suggestions: use of cutting coil recommended. clean tap of metal chips to extend life. reverse drill to back out after completing tap..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thread Drilling Tapping Deburring Countersinking

  • Titanium Combination Drill tap bits are made of high speed steel 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • 13pcs drill tap kit include SAE and metric sizes, Suitable for most commonly used screw tapping.SAE Included 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC,Metric included M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 , Includes storage case and quick change adapter for easy bit switching.
  • Drill, tap, deburr and countersink in one quick and easy action,and complete job on copper, brass, aluminum, sheet metal ,mild steel and plastic.work completely, greatly save processing steps and time costs, and improve work efficiency..
  • Each drill tap bit is engraved with the right size, which is convenient for you to choose the size that suits you. Strong hex shank ensures strong connection to drill.a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Included convenient swivel storage case,Swivel feature props up tap drill bits and securely holds them in place until ready t....
Check Stock

BOSCH BDT1032 10-32 Plug Tap and No 21 Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

BOSCH BDT632 6-32 Plug Tap and No 36 Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

BOSCH BDT1024 10-24 Plug Tap and No. 25 Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock