ReviewsUndercoating

30 Inch Drop In Kitchen Sink Stainless Steel - BoomHoze Single Bowl 16 Gauge Top Mount Kitchen Sink Handmade Deep Kitchen Sink Basin

  • ✔Indestructible & Durable Construction: The Sink is constructed by 16 gauge T-304 stainless steel for exceptional resistance to corrosion, rust, and scratches. Added R10 design could let your wiping reach to each corner. Easy to clean and long-lasting..
  • ✔Heavy Duty Undercoating & Thick Rubber Padding: Extra thick rubber dampening pads cover over 80% of sink base to absorb noise. And heavy duty stone guard undercoating to prevent condensation and protect kitchen cabinets..
  • ✔Fast & Complete Drainage: Visible X-shaped water guideline on the slightly sloped bottom of topmount kitchen sink leads to fast and complete drainage, no blockage. Besides, deep single bowl prevents splashing from happening..
  • ✔Sink Dimension: 30" x 22" x 10" (minimum cabinet size is 33") | 10mm radius slightly curved inside corners for easy cleaning..
  • ✔Package Included: Box comes with stainless steel kitchen sink, roll-up dish drying rack, bottom rinse grid, 3.5" basket strainer drain, cutout template and topmount installation clips..
Check Stock

Signature Hardware 948483 Sitka 33\ Drop In or Undermount 60/40 Double Basin Stainless Steel Single Hole Kitchen Sink

  • Offering a pair of offset basins, the 33" Sitka double-bowl sink brings separation to your kitchen's workspace. Great for a high-traffic kitchen, this product is made of durable, 304-grade stainless steel. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. A pre-drilled mounting hole on the back rim accepts your choice of single-hole faucet..
  • Covered under Signature Hardware's limited lifetime.
  • Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
  • It is recommended to have the sink at the job site before cutting cabinet or counter top.
  • Sound absorption pads on the underside of sink.
  • Has an undercoating to prevent condensation buildup.
  • Basin Dimensions (Left): 17-1/2" L x 16-5/8" W x 10" D.
  • Basin Dimensions (Right): 11-3/4" L x 16-5/8" W x 10" D.
Check Stock

Signature Hardware 948481 Sitka 33\ Drop In or Undermount 60/40 Double Basin Stainless Steel 4-Hole Kitchen Sink

  • The 33" Sitka double-bowl sink has offset basins that provide separate working spaces. Great for a high-traffic kitchen, this product is made of durable, 304-grade stainless steel. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. Four pre-drilled mounting holes on the back rim accepts your choice of widespread faucet with a side spray..
  • Covered under Signature Hardware's limited lifetime.
  • Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
  • It is recommended to have the sink at the job site before cutting cabinet or counter top.
  • Sound absorption pads on the underside of sink.
  • Has an undercoating to prevent condensation buildup.
  • Basin Dimensions (Left): 17-1/2" L x 16-5/8" W x 10" D.
  • Basin Dimensions (Right): 11-3/4" L x 16-5/8" W x 10" D.
  • Faucet Centers: 8" (distance between the installation holes for the faucet handles).
Check Stock

Signature Hardware 948492 Calverton 32\ Drop In or Undermount 40/60 Double Basin Stainless Steel Kitchen Sink

  • Featuring a large basin for washing dishes and a smaller basin for prep work, the 32” Calverton Double-Bowl Sink is functionally designed. This product is made of durable, 304-grade stainless steel to handle all your demands. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below..
  • Covered under Signature Hardware's limited lifetime.
  • Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
  • Sink features dual basins with a 60/40 split.
  • It is recommended to have the sink at the job site before cutting cabinet or counter top.
  • Features a low center divide for maneuvering large pots and pans.
  • Sound absorption pads on the underside of sink.
  • Has an undercoating to prevent condensation buildup.
  • Sink Length: 31-3/8" (from left to right).
  • Sink Width: 20-3/8" (from front to back).
  • Basin Dimensions (Left): 13-1/2" L x 15-5/8" W x 7-1/2" D.
  • Basin Dimensions (Right): 14-7/8" L x 18-1/4" W x 10" D.
Check Stock

Signature Hardware 948486 Ortega 33\ Drop In or Undermount 50/50 Double Basin Stainless Steel 4-Hole Kitchen Sink

  • Designed for a busy kitchen, the 33" Ortega double-bowl sink has evenly split basins that provide separate working spaces. This product is made of durable, 304-grade stainless steel. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. Four pre-drilled mounting holes on the back rim accepts your choice of widespread faucet with a side spray..
  • Covered under Signature Hardware's limited lifetime.
  • Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
  • It is recommended to have the sink at the job site before cutting cabinet or counter top.
  • Sound absorption pads on the underside of sink.
  • Has an undercoating to prevent condensation buildup.
  • Basin Dimensions (Left): 14-5/8" L x 16-5/8" W x 9" D.
  • Basin Dimensions (Right): 14-5/8" L x 16-5/8" W x 9" D.
  • Faucet Centers: 8" (distance between the installation holes for the faucet handles).
Check Stock

Kitchen Sink,33\L x 22\W Topmount Workstation Drop in Single Bowl 2 Hole 304 Stainless Steel 18 Gauge Handmade Kitchen Sink,Brushed Nickel Ledges Kitchen Sinks With Accessories

  • Exterior Dimensions: 33"L x 22"W x 9"D, Interior Dimensions: 31"L x 18"W x 9"D. Standard 3-1/2" Drain Opening That Fits the Most Common Garbage ..
  • Our single bowl kitchen sink has added the 3mm thick heavy duty sound guard undercoating and thick rubber padding to reduce the faint sound of running water. Anti-condensation spray undercoating is also applied to the exterior of the sink to protective layer and to prevent moisture accumulation..
  • The 33 drop in sink is made of dent-resistant T304 stainless steel superior strength and durability. The brushed nickel finish will no water trace left, very easy to clean, anti-freezing heat and non-seepage water , long lasting and durability..
  • Package includes stainless steel drop in kitchen sink, cutting board, roll-up rack, colander, stainless steel bottom rinse grid, cutout template, topmount installation clips, plus 3.5” standard strainer..
  • Our workstation kitchen sink is designed with X water guide line on bottom which is faster to remove water and avoid clogging..
Check Stock

Kraus KBU14E Outlast MicroShield Scratch-Resist Stainless Steel Undermount Single Bowl Sink, 31.5\ 16 Gauge, Premier Series

  • 1 in quality and value: premium Grade extra-thick 16G stainless Steel sink with best-in-industry noise defend soundproofing and protective undercoating.
  • Lasting looks: outlast microshield scratch-resist Steel designed to withstand daily wear & tear, and prevent damage that could age your sink. Includes free accessories.
  • Kraus Tru16: real 16-gauge industrial Grade stainless Steel, always 1.5mm. Durable and dent-resistant, thicker than competitor products.
  • Free kitchen accessories: bottom grid, 3-piece basket strainer, Kraus 100% cotton dish towel, all pack Aged with sink in a premium Kraus utility bag.Length of Bowl:29.5 inch.
  • #1 IN QUALITY AND VALUE: Premium grade extra-thick 16G stainless steel sink with best-in-industry NoiseDefend soundproofing and protective undercoating.
  • LASTING LOOKS: Outlast MicroShield Scratch-Resist Steel designed to withstand daily wear & tear, and prevent damage that could age your sink. Includes free accessories. Ranked #1 by Architects and Designers.
  • KRAUS TRU16: Real 16-gauge industrial grade stainless steel, always 1.5mm. Durable and dent-resistant, thicker than competitor products.
  • LIFETIME WARRANTY: Satisfaction guaranteed with #1 customer service that puts you first.
  • FREE KITCHEN ACCESSORIES: Bottom Grid, 3-Piece Basket Str....
Check Stock

MowerPartsGroup Lubricant/Corrosion Inhibitor, 11.75 oz.

  • GREAT FOR- Electrical connections, engine components, equipment storage, fasteners, motors, salt spray protection, shaft, spindles, steering and throttle linkages, undercarriage of vehicles.
  • PROTECTS- Metal surfaces, resists salt spray and humidity.
  • EFFICIENT- Dries quickly to a tough waxy coating, great for undercoating cars, trucks and boat components, protects from salty road spray and winter conditions.
Check Stock

Trendy Salon Aprons Waterproof Hair Stylist Apron, Pink Glitter Skull

  • Smooth vinyl glitter design in Silver or Pink.
  • Waterproof / Durable middleweight polyester with a thick undercoating of soft polyurethane.
  • Fully adjustable waist and neck / Flap pockets.
  • Measures 28” x 28” one size fits most.
Check Stock

Transolid STSB15156-2 Kitchen Sink, Stainless Steel

  • 20 gauge 304 stainless steel with Brushed finish.
  • 3mm sound deadening pads and superior undercoating for added sound insulation.
Check Stock

Transolid STSB25227-1 Kitchen Sink, Stainless Steel

  • Superior undercoating for added sound insulation.
Check Stock