ReviewsUnf Thread Chaser Set

CARTMAN 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

• Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts. Features: Internal and External Three Leg and Two Leg jaw puller yokes.
• 5lb. Slide Hammer, 425mm long, M16*1.5mm UNF thread.
• Front Hub puller, Rear Axle puller, Locknut Cone.
• Dent puller screws (large and small), Supplied in blow mold storage case..
• Features: Internal and External Three Leg and Two Leg jaw puller yokes..

EVIL ENERGY 6AN Flare to 6AN ORB Male Fuel Rail Adapter Fitting Black 2Pcs

• size:the thread size of 6AN is 9/16-18 UNF,the thread size of 6AN ORB is 9/16-18 UNF.
• Sealing：The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring..
• Material: The 6AN to 6AN orb reducer is made of aluminum alloy 6061-T6 which is anodized black surface,and the O-ring is made of NBR rubber.(Temperature Range: -40F° to +212F°.Maximum working pressure: 4000PSI).
• The orb fitting can be used with water, air, fuel, oil, fuild, E85, etc..
• EVIL ENERGY provide the orb adapter 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

Threaded Rod, Carbon Steel, 1/2-20x1 ft

• Price For: Each Basic Material: Steel Fastener Finish: Plain System of Measurement: Inch Material Grade: Low Carbon Rockwell Hardness: B85 to B97 Fastener Thread Direction: Right Hand Item: Threaded Rod Yield Strength (PSI): 45, 000 Thread Class: 1A Fastener Thread Type: UNF Dia./Thread Size: 1/2"-20 Tensile Strength: 60, 000 psi Overall Length: 1 ft..
• Country of Origin (subject to change): United States.

Century Drill & Tool 73415 Spiral Flute Screw Extractor Set, 1 - #5

Hanson 12008 1\ Rd Hex Plain Die Stock for Tap Die Extraction

• CUT AND RENEW THREADS: The ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
• SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
• UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
• UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
• Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
• UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
• UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
• BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
• Can cut materials such as cast iron, steel, aluminum, copper.
• EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
• CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die h....

Threaded Rod, Steel, 7/16-20x3 ft

• Price For: Each Basic Material: Steel Fastener Thread Direction: Right Hand Item: Threaded Rod Meets/Exceeds: ASME B18.31.3 Tensile Strength: 115, 000 to 125, 000 Rockwell Hardness: C35 Overall Length: 3 ft. Temp. Range (F): Not Rated Fastener Thread Type: UNF Fastener Finish: Zinc Yellow Material Grade: B7 Dia./Thread Size: 7/16"-20 System of Measurement: Inch.
• Yield Strength (PSI): 95, 000 Country of Origin (subject to change): Multiple.

Heyxire Paintball Co2 Cylinder Tank Canister Regulator Adapter Convert Female G1/2 to Male G5/8 Thread

• Paintball tank female 0.825″-14NGO to male 5/8″-18UNF.
• With this adapter you can convert your CO2 pin valve paint ball tank to a standard 5/8-18UNFmale fitting..
• Allowing you to attach a CO2 regulator with 5/8-18UNF thread to a paintball CO2 cylinder..

Vector Tools Tap and Die Set, Premium, SAE & METRIC, Titanium Coated, 80-Piece

• EASY-TO-START THREADING: Plug type, fluted coarse (UNC), and fine (UNF) tap and dies in SAE for easy-to-start hand threading applications.
• HIGH STRENGTH ALLOY STEEL: GCr15 alloy steel construction provides superior blade hardness and thread cutting performance.
• Titanium coating provides more rust resistance and durability than plain finished products HARD CASE INCLUDED: ABS hard case for organization, protection and safe storage.
• Tap and dies allow cutting and repair of external or internal threads by hand.

Neiko 00916A 45 Piece SAE Tap & Die Set, SAE Tap and Die Set, Tap Set, Rethreading Kit, Pro-Grade Large Tap and Die Set, Titanium Threading Tools, Thread Chaser Set, Tap & Die Set Standard

• HEAVY DUTY TAP & DIE SET: Titanium cutting edges hold sharpness up to 20x longer than steel, making this a perfect SAE tap and die set for any project, big or small..
• VERSITILE: Create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper, and stainless steel with this tap and die kit..
• DURABLE STORAGE CASE: This large tap and die set standard is fully equipped in a heavy-duty molded case for easy identification, storage, and portability for all your jobs on the go..
• PREMIUM MATERIAL: Our SAE thread chaser set is made of a professional grade steel, highly durable and built to last for multiple uses. This tap set is perfect car repairs, DIY projects, and much more..
• COMPLETE SET INCLUDE: This rethreading kit comes with the most popular SAE taps & dies. T-handle tap wrenches, adjustable die wrench, screwdriver, and thread pitch gauge..

1\ NPT Pipe Carbon Hex Rethreading Die

• ▲ PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
• ▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
• ▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
• Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
• ▲ MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
• (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
• (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
• ▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.

10AN Femlae to 8AN Male Flare Reducing Hose Union Fittings Aluminum AN10 to AN8 Reducer Fuel Oil Line Adapter Black

• JIC -10 AN (7/8-14) UNF female to male flare -8 AN (3/4"-16) UNF Thread expander / reducer pipe connector.
• Made of High Performance Lightweight 6061 T6 CNC Machined Billet Aluminum Material.
• Black anodized finish for durability, long last and strength.
• Universal fit. such as: Oil/ Fuel/ Water/ Gas/ Fluid/ Air Line.
• AN Female to Male Oil Fuel Line Pipe Redecer Extensions Fitting Adapter.