ReviewsUniform Cut And Clean Threads

OXO Good Grips 3-Blade Tabletop Spiralizer with StrongHold Suction

Make quick work of creating uniform spirals from fruits and vegetables for curly fries, salads, garnishes and more.
Three stainless steel blades create spaghetti cut (1/8th inch), fettuccine cut (1/4th inch), or ribbon cut noodles.
Removable blade box keeps blades clean, safe and organized when not in use and stores onboard.
Food holder with sharp teeth holds food securely while spiralizing and dishwasher-safe.
Rotating handle turns fruits and vegetables to spiralize. Side handle advances fruits and vegetables through blades and folds up for compact storage.
Stronghold suction cup for non-slip stability on countertops.

Check Stock

Rocaris 9 Pack of M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Titanium Coated HSS Spiral Flute Metric Taps Set

- These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance..
- There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads..
- Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap..
- They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them..
- These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair..

Check Stock

Drill America 1/8'-27 NPT Pipe Tap, Carbon Steel, DWTPT Series

Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.

Check Stock

NEIKO 00908A Tap and Die Set | 76 Piece Threading Tool | Standard & Metric |Alloy Steel | Hexagon T Type Wrench | SAE and MM

[APPLICATION]: Taps and dies are tools used to create purpose screw threads, which is called threading. Use the tap to cut threads on the holes where threads fasteners are positioned and use the die to cut threads..
[DURABLE]: Tap and dies are constructed of durable alloy steel for a long life to build new tools or repair damaged and worn threads..
[SAE & METRIC]: 34pc tap & 34pc die: M3x0.5, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1, M7x1, M8x1, M9x1, M10x1.25, M10x1.5 ,M11x1.5, M12x1.5, M12x1.75, M8x1.25, M9x1.25.
[SIZES]: 4-40UNC, 6-32UNC, 8-32UNC, 10-24UNC, 10-32VNF, 12-24UNC, 1/4-20UNC, 1/4-28UNF, 5/16-18UNC, 5/16-24UNF, 3/8-16UNC, 3/8-24UNF, 7/16-14UNC.
[SIZES]: 7/16-20UNF, 1/2-13UNC, 1/2-20UNF, 1/8-28BSP, 1/8-27NPT | 2pc screwdriver pitch gauge, 1pc screwdriver, 2pc T type tap wrenches: 1/4" and 1/2" capacity.

Check Stock

AMZCNC Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit 1/2 to 2 inch (8T(1/2"-2"))

Powerful 8 US TRUE TON Punching Capacity. Compatible with GREENLEE and other domestic punch tooling 3/4"-16 threads..
6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2".
Punching Thickness Capacity: 1/8 inch (10 ga) Steel Punching Capacity, 1/16 inch Stainless Steel..
Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic.
Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..

Check Stock

Fasteners Plus Grade B7 Coarse Fully Threaded Rod, Plain Finish, 1" -8 Thread Size, 24" Length, Right Hand Threads

SPECS: Diameter: 1 inch | Length: 24 inch | Thread Type: Coarse (standard) | Threads Per Inch: 8 | Fully Threaded | Grade: B7 |Material: Carbon Steel | Finish: Plain.
COMMONLY USED: To bolt pipe flanges together as it can handle both high temperature and high pressure applications.
CUT THREADS: Rod starts off as full size round stock and threads are cut into the material.
PLAIN FINISH: Designed for indoor use only where chemicals and solvents are not present.

Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....

Check Stock

Califee Crinkle Cutter Stainless Steel French Fry Slicer with Wooden Handle Hand-held Chipper / Wavy Blade Cutting Tool Vegetable Salad Chopping Knife

【Excellent Material】: Made of stainless steel, harder and firmer, it is not easy to rust, and the thick material is not easy to deform..
【Standard Size】: Length 11.8 inches, width 2.9 inches. The suitable size can cut vegetables and fruits of different sizes..
【Easy to Use】: Deeper and sharper blade groove design, you can cut vegetables easily and quickly. Vegetables have a uniform wave shape. Exquisite....
【Hanging Hole Design】: The round handle is comfortable to hold. Easy to clean, hang up for storage when not in use. Clean and hygienic..
【Multi-Purpose】: Not only can cut potatoes, carrots, onions, and other vegetables, but also various fruits. Make exquisite dishes. Enjoy a....

Check Stock

Hanchen Electric Chinese Medicine Slicer Stainless Steel Herbs Cutter 110v Commercial Herbal Slicing Machine for Antler Ginseng Astragalus Maca Notoginseng Thinkness 0.3~3mm Adjustable

【Medicine Cutter】One Year Warranty. This 110v herbal slicing machine is used for cutting all kind of small root chinese medicine, such as Ginseng,....
【750psc/min High Efficiency】450w Copper Motor + Three Stage Gear Drive, this medicine slicer is more effort saving and efficiency than manual....
【Uniform Thickness】Lengthened 3 High-Speed Steel Blades has larger contact area, cuting out uniform slicing and causing less waste. Please Clean....
【Slice Shape】Can cut in all directions( inclined / , horizontal - , vertical l ) and the thickness is adjustable from 0.3mm to 3mm with uniform....
【Please Note】To Get Slices: 01.Please bake it soft before slicing.
02.Check if it has already been softened.

Check Stock

Char-Broil Center Cut Lump Charcoal 11 lb

Better charcoal equals better grilling results.
Clean-burning, 100% natural, hardwood lump charcoal.
Comprised of organic, center-cut hardwoods only- no limbs, bark, binders or excessive charcoal fines and dust.
Uniform 3-inch average briquette size and 3 percent max ash for easier use and more reliable results.
Fired longer to product a lighter-weight, clean-burning, premium charcoal that minimizes unwanted wood sparks, dirty smoke and ash.

Check Stock

KECHUANG 60-Pieces Tap and Die Set Metric and SAE Standard Internal and External Threaded Tool Set

► PREMIUM MATERIAL- Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
► EXCELLENT CUTTING PERFORMANCE-All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance, Can cut materials such as cast iron, steel, aluminum, copper, Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
► VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
► EASY-TO-START THREADING: Plug type, fluted coarse (UNC), and fine (UNF) tap and dies in SAE for easy-to-start hand threading applications.
► WIDE APPLICATION: Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.

Check Stock