ReviewsUnion Barbed Fittings

Raindrip R280DT BLK 1/4-Inch by 50-Foot Black Drip-A-Long with Fittings

  • Slowly waters the soil around your plants for complete root zone hydration.
  • the dripline emits water along the entire line.
  • Ideal for short runs on flat surfaces, such as vegetable gardens, flower beds, planter boxes, and plant rows.
  • Dripline can be cut to size and sections connect together with the included ¼ in. barbed fittings.
  • Flow rate may vary along the length of dripline with higher flow closer to the water source.
  • Use with a ¾ in. FHT X ¼ in. adapter to connect to water source.
  • Connects with included ¾ in. FHT X ¼ in. Adapter.
  • layout dripline next to plants to be watered.
  • ½ GPH non pressure-compensating emitters are spaced 12 in. apart.
  • turbulent flow design flushes out sediments which can potentially clog emitters.
  • Flexible tubing bends to accommodate curved irrigation areas as well as handle straight runs.
  • Kit includes: 50 ft. of ¼ in. Dripline preassembled with ½ GPH drippers.
  • 5 barbed tees, 5 barbed elbows, 5 barbed couplings and 5 end plugs.
Check Stock

Pexflow PXKT10012 Starter Kit for 1/2-In Pex with Crimper & Cutter Tools - Set includes Brass Elbow & Coupling Fittings, Cinch Clamps, Half Clamps, and 2 Rolls of 1/2-In X 100ft PEX Tubing

  • DIY: Perfect kit for the home-owner or the professional looking to get started with PEX plumbing bundle. Save time looking for all parts needed to get the job done..
  • HIGH QUALITY: Comes with great PEX tools that makes it comfortable and easy to work with. It also has the ability to work in hard to reach tight spaces. Compatible with PEX piping system..
  • TOOLS: 1x PEX Crimper Tool With Lock Hook.
  • 1x PEX Scissor Shear Cutter Tool - Spring-Loaded Handle, Lock Hook & Convenient Carrying Case.
  • FITTINGS: Lead Free Brass Barbed 1/2 inch 90-Degree Elbow Fittings (Bag of 25) + Lead Free Brass Barbed 1/2 inch Straight Coupling Fittings (Bag of 25).
  • TUBING & CLAMPS:1/2 Inch Blue Pex Tubing 100 Feet Coil + 1/2 Inch Red Pex Tubing 100 Feet Coil, Stainless Steel half inch Cinch Clamp Rings (Bag of 100) + Half Clamp with Nail (Bag of 100).
Check Stock

Hydrofarm Active Aqua DRM58T 55 Gallon Drum Hydroponic Reservoir with Pre-Drilled Holes Cover Lid and Bolt Ring Closure, Black

  • HYDROPONIC RESERVOIR: This Hydrofarm 55-gallon drum is perfect for use as a reservoir for larger hydroponic systems.
  • HIGH QUALITY: High quality 55-gallon drum that comes with a pre-drilled cover and bolt ring closure.
  • DESIGN: Pre-drilled holes can be used for the grommets and barbed fittings necessary to outfit the drum with tubing for filling and draining.
  • MODIFIABLE LID: A larger hole can also be cut in the lid to act as a port for adding nutrients, checking pH, etc..
  • SIZE: Dimensions (L x W x H): 22 x 22 x 35.5 inches.
  • The solid lid can be drilled for the grommets and barbed fittings necessary to outfit the drum with tubing for filling and draining.
Check Stock

Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings

  • ❀【Package Included】: Cimeton drip irrigation tubing punch and fittings kit includes 2pcs drip irrigation tube hand punch (1pc professional hole punch and 1pc 2-in-1 punch tool).
  • and 30pcs drip irrigation fittings: 20pcs straight barbed plugs and 10pcs figure 8 end closure plugs, 32pcs in total. This is a practical tool kit to meet your daily gardening and irrigation needs..
  • ❀【Long-Lasting】: Made of durable plastic, these punch tools and irrigation fittings are sturdy and safe, non-toxic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
  • ❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
  • ❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the....
Check Stock

280 Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4 Tubing Fittings Kit for Flower Pot Garden Lawn Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling

  • ...enient and will not leak easily，just push the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling.
  • Large quantities: 280 matching kits total, Hose Elbows Fittings (25pcs), Barbed Hose End Plug (25pcs), Oblique Barbed 4-way Connector (25pcs), Single barbs (30pcs), Straight Barbs (100pcs), Oblique Barbed Tees (75pcs).
  • High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life..
  • Widely used: These drip irrigation accessories connectors are ideal for vegetable gardens, flower beds, elevated garden beds, lawns, gardens, vineyards, forest gardens, farm, residential, greenhouse gardening, and agricultural irrigation applications, with strong practicability for you.
  • Note: Please confirm your size before purchasing. These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. Please check the size carefully before purchasing；If needed, you can use a he....
Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • ...nd pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
  • PACKAGE CONTENTS: Fuel tester kit gas pressure test gauge package is a comprehensive kit of adapters and fittings.
  • Comes with flex hoses, fittings, and instructions for quick reference.
  • Includes Brass 1/8"-27 NPTx1/4"-18NPT, Brass 1/4" Barbed x 1/4"-18NPT, Aluminum 1/4" & 3/8 Barbed x 1/8-24NPT, 3 Rubber Hoses 1/4" x 2.5" L, 3/8" x 3.0" L.
Check Stock

BEADNOVA Drip Irrigation Parts 10 Pcs 1/2 Inch Barbed End Plugs Goof Plugs Drip Irrigation Fittings Drip Line Connectors for 1/2 Inch Irrigation Tubing Garden Watering System 10pcs

  • PACKAGE INCLUDES: Includes in a pack 10 pcs end plug barbed connectors, approximately 1.7” or 40mm long. Drip irrigation barded suitable for 1/2 Inch irrigation tubing..
  • STRONG MATERIAL: This end plug is made of high grade plastic which is strong and good for both indoor and outdoor use..
  • EASY INSTALLATION: Connect irrigation tubing by simply insert this barbed connector at the ends of the tube. No tools or glue required. Push the tube firmly into the irrigation barbed to avoid leakage. Soften the end of tube with blower if you find the tube is too stiff before inserting..
  • WIDE APPLICATIONS: These irrigation fittings are essential for watering system, drip system and sprinkle system in vegetable gardens, flower beds, greenhouse and patio. Use irrigation barbed to build yourself a minimal maintenance watering system, save water and energy..
  • COME WITH STORAGE BAG: Barded connectors are packed into a plastic bag for easy storage..
Check Stock

One Stop Outdoor USA Made - 1/4-Inch x Irrigation/Hydroponics Dripline with 6-Inch Emitter Spacing (Brown) (500' Foot Roll)

  • DURABLE: Resistant to chemicals and fertilizers commonly used in landscaping.
  • EASTY TO USE: Flexible tubing for easy installation - Attach to 1/2" Drip tubing with 1/4" barbed fittings.
  • OPERATING PRESSURE (PREVENT LEAKS & BLOWOUTS): 10-25 PSI (Minimum of 150 mesh filtration).
  • EMITTERS: Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures.
Check Stock

JOYPRO 60 Pieces Drip Irrigation 1/4 Barbed Elbow Fittings Barbed Connectors for 1/4 Inch Irrigation Tubing Drip Line Elbow for Drip Sprinkler Garden Lawn Systems

  • 【PERFECT MATCH 1/4 INCH IRRIGATION TUBING】JOYPRO 1/4 inch irrigation elbow fittings can connect to most of the standard 1/4" drip irrigation tubing. (Note: Please check the size of tubing carefully before purchasing.).
  • 【MADE OF DURABLE PLASTIC MATERIAL】JORPRO drip line elbows are made of high quality engineering plastics, so our irrigation elbow connectors are durable, strong, water resistant, chemical-resistant and long-lasting than others..
  • 【EASY TO INSTALL】It is easy to install without any glue, tools or clamps. Directly insert this irrigation tubing elbow at the ends of the water pipe, the barbed ends can grab 1/4" tubing tightly for a secure leak-proof connection..
  • 【PACKAGE LIST】It comes with 60 pieces barbed elbow connectors, which let you connect your irrigation systems as you wish..
  • 【WIDE APPLICATION】These elbow fittings for 1/4 inch sprinkler hose is ideal for garden, flower bed, greenhouse, farm, lawn, patio and other agricultural watering system..
Check Stock

One Stop Outdoor USA Made - Irrigation Drip Line Emitter Tubing 100', 12" Emitter Spacing, 1/4" .52 GPH, Color Black (.170 ID x 240 OD)

  • Resistant to chemicals and fertilizers commonly used in landscaping.
  • Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures.
  • Attach to 1/2" Drip tubing with 1/4" barbed fittings.
Check Stock

Plastic Hose Barb Fitting Hose Fitting Adapter for Air Water Fuel 3/16 x 3/16 1/4 x 1/4 3/8 x 3/8 1/2 x 1/2 5/8 x 5/8 8Pcs

  • 【Package Included】 8 pieces Plastic barb connector in total, including 2pcs 3/16" x 3/16", 2pcs 1/2" x 1/2", 2pcs 5/8" x 5/8", 1pcs 1/4" x 1/4", 1pcs 3/8" x 3/8".
  • 【Material】 Barbed hose fittings made of 100% PP polypropylene plastic that is durable, strong, water resistant, chemical-resistant materials to assure long life.
  • 【Working Temperature & Pressure】 The plastic hose fittings temperature range from -9 °F to 175 °F, but hose splicer is not resistant to oil.
  • 【Easy Installation】 Barb hose easy to install without glue, or other tools required. Barbed ends grab 5/8" tubing tightly that won't leak.
  • If necessary, you can use a heat gun or blower to soften the end of the tube before inserting it, after cooling, the tube will remain tight.
  • 【Wide Application】 Pipe connectors Suitable for applications in pharmaceutical, food and beverage, laboratory, chemical processing and others.
Check Stock